Resultados de la busqueda


Productos que en su código contienen CAN : 4

IXXAT

Código: CAN-IB410-PMC

Active PMC board

1-4 x CAN (High-/Low-Speed), LIN

(New product: available June 2016)

With the CAN-IB410/PMC HMS offers an interface board based on a modern and highly m

  • Active board with 32 bit microcontroller
  • Easy expandable via field bus expansion and expansion board
  • Up to four CAN channels (High-/Low-Speed optional switchable)
  • LIN optional
  • Galvani..

CAN-IB410/PMC

IXXAT

Código: CAN-IB210-XMC

Active XMC board

1-4 x CAN (High-/Low-Speed), LIN

(New product: available June 2016)

With the CAN-IB210/XMC HMS offers an interface board based on a modern and highly m

  • Active board with 32 bit microcontroller
  • Easy expandable via field bus expansion and expansion board
  • Up to four CAN channels (High-/Low-Speed optional switchable)
  • LIN optional
  • Galvani..

CAN-IB210/XMC

EKS Engel
 DL CAN / DL CAN-R

Código: DL CAN / DL CAN-R

The systems DL CAN connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.
  • CAN Bus
  • DeviceNet
  • Redundant
  • FiberView
<..

DL CAN / DL CAN-R

IXXAT
 CAN@net NT 200-420

Código: CAN@net NT 200/420

The CAN@net NT is offered in two variants, as CAN@net NT 200 with two classic CAN channels and as CAN@net NT 420 with four CAN channels, of which two channels can be switched between CAN and CAN FD.
  • Easy coupling of CAN and CAN-FD systems and devices
  • Bridging of large distances and easy remote system access using Ethernet
  • Cost savings due to simple wiring
  • Up to four independent CAN channels (2 C..

CAN@net NT 200/420

Productos que en su contenido contienen CAN: 758

Anybus
 Anybus Communicator PROFINET

Código: AB7013

Integrate your serial RS-232/422/485 based industrial devices and equipment to a PROFINET control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - PROFINET

Anybus
 abc-canopen

Código: AB7315

Integrate your CAN-based industrial devices and equipment to a CANopen control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - CANopen

Anybus
 Anybus Communicator CC-Link

Código: AB7321

Integrate your CAN-based industrial devices and equipment to a CC-Link control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - CC-Link

Anybus
 Anybus Communicator ControlNet

Código: AB7314

Integrate your CAN-based industrial devices and equipment to a ControlNet control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - ControlNet

Anybus
 Anybus Communicator DeviceNet

Código: AB7313

Integrate your CAN-based industrial devices and equipment to a DeviceNet control system without the need for any changes to your device. Just connect, configure and you're done!

Anybus Communicator CAN - DeviceNet

Anybus
 Anybus Communicator EtherCAT

Código: AB7311

Integrate your CAN-based industrial devices and equipment to a EtherCAT control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - EtherCAT

Anybus
 Anybus Communicator EtherNet-IP

Código: AB7318

Integrate your CAN-based industrial devices and equipment to a EtherNet/IP control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - EtherNet/IP

Anybus
 Anybus Communicator Modbus RTU

Código: AB7316

Integrate your CAN-based industrial devices and equipment to a Modbus RTU control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - Modbus RTU

Anybus
 Anybus Communicator Modbus TCP

Código: AB7319

Integrate your CAN-based industrial devices and equipment to a Modbus TCP control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - Modbus TCP

Anybus
 Anybus Communicator Profibus

Código: AB7312

Integrate your CAN-based industrial devices and equipment to a PROFIBUS control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - PROFIBUS

Anybus
 Anybus Communicator PROFINET

Código: AB7317

Integrate your CAN-based industrial devices and equipment to a PROFINET control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - PROFINET

Anybus
 Anybus Communicator CAN - PROFINET-IRT

Código: AB7320

Integrate your CAN-based industrial devices and equipment to a PROFINET-IRT control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator CAN - PROFINET-IRT

Anybus
 X-gateway CANopen Master - CANopen Slave

Código: AB7304

The Anybus X-gateway CANopen provide a seamless connection between a CANopen upper network and a secondary CANopen sub-network. This makes it possible to extend CANopen network and devices without a secondary PLC system.

Anybus X-gateway - CANopen Master - CANopen Slave

Anybus
 sg-gateway-eip

Código: ASG4107

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Anybus SG-gateway with EtherNet/IP Interface

Anybus
 Anybus SG-gateway with PROFINET Interface

Código: ASG4007

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Anybus SG-gateway with PROFINET Interface

Anybus
 sg-gateway-profibus

Código: ASG4207

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Anybus SG-gateway with PROFIBUS Interface

Anybus
 Anybus SG-gateway with I-O interface

Código: ASG1007

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications

Anybus SG-gateway with I/O interface

Anybus
 Anybus SG-gateway with M-Bus Master

Código: ASG1107

The Anybus® SG-gateway is designed to specifically target Demand Response (networking of industrial electric loads) and Virtual Power Plants (networking of energy resources like biogas plants or combined heat and power units) applications.

Anybus SG-gateway with M-Bus Master interface

Anybus
 Anybus X-gateway PROFIBUS Slave - J1939

Código: AB7615

The Anybus X-gateway J1939 Gateway provides connectivity between a PROFIBUS network and a J1939 Heavy Duty vehicle (CAN) network. The X-gateway appears as a PROFIBUS-DP Slave device allowing a PROFIBUS Master to read or write data from the J1939 network.

Anybus X-gateway – PROFIBUS Slave - J1939

Anybus
 CB-B40-ETH

Código: AB6679

The Anybus CompactCom B40 for CC-Link IE Field is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the CC-Link IE Field network.

Anybus CompactCom B40 Brick - CC-Link IE Field

Anybus
 Anybus Communicator Lonworks

Código: AB7009

Integrate your Modbus serial RS-232/422/485 based industrial devices and equipment to a LONWORKS control system without the need for any changes to the device. Just connect, configure and you're done!The Anybus Communicator is a proven and trusted proto

Anybus Communicator - Lonworks

Anybus
 B40-ECT

Código: AB6677

The Anybus CompactCom B40 for EtherCAT is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the EtherCAT network.

Anybus CompactCom B40 Brick - EtherCAT

Anybus
 B40-EIP

Código: AB6674

The Anybus CompactCom B40 for EtherNet/IP is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the EtherNet/IP network.

Anybus CompactCom B40 Brick - EtherNet/IP

Anybus
 B40-MTCP

Código: AB6673

The Anybus CompactCom B40 for Modbus TCP is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the Modbus TCP network.

Anybus CompactCom B40 Brick - Modbus TCP

Anybus
 M-Bus to Modbus application overview

Código: 024380

The Anybus M-Bus to Modbus TCP gateway allows M-Bus devices to communicate on a Modbus TCP network. The gateway decodes M-Bus telegrams making it possible to map meter values to Modbus registers. This enables central control and supervision of measuring d

Anybus M-Bus to Modbus TCP gateway

Anybus
 CB-B40-ETH

Código: AB6681

The Anybus CompactCom B40 for Powerlink is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the Powerlink network.

Anybus CompactCom B40 Brick - Powerlink

Anybus
 M-Bus to Modbus application overview

Código: 025070

The Anybus M-Bus to Modbus TCP gateway allows M-Bus devices to communicate on a Modbus TCP network. The gateway decodes M-Bus telegrams making it possible to map meter values to Modbus registers. This enables central control and supervision of measuring d

Anybus M-Bus to Modbus TCP gateway

Anybus
 B40-PNT

Código: AB6675

The Anybus CompactCom B40 for PROFINET is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the PROFINET-RT or IRT network.

Anybus CompactCom B40 Brick - PROFINET-IRT

Anybus
 B40-CCL

Código: AB6672

The Anybus CompactCom B40 for CC-Link is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the CC-Link network.

Anybus CompactCom B40 Brick - CC-Link

Anybus
 B40-DEV

Código: AB6671

The Anybus CompactCom B40 for DeviceNet is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the DeviceNet network.

Anybus CompactCom B40 Brick - DeviceNet

Anybus
 B40-PDP

Código: AB6670

The Anybus CompactCom B40 for PROFIBUS is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the PROFIBUS network.

Anybus CompactCom B40 Brick - PROFIBUS

Anybus
 M40-ECT

Código: AB6607

The Anybus CompactCom M40 for EtherCAT is a complete communication module which enables your products to communicate on an EtherCAT network. The module supports fast communication speeds, making it suitable also for high-end industrial devices.

Anybus CompactCom M40 Module - EtherCAT

Anybus
 M40 EIP

Código: AB6604

The Anybus CompactCom M40 for EtherNet/IP is a complete communication module which enables your products to communicate on an EtherNet/IP network. The module supports fast communication speeds, making it suitable also for high-end industrial devices.

Anybus CompactCom M40 Module - EtherNet/IP

Anybus
 M40-PWL

Código: AB6611

The Anybus CompactCom M40 for Powerlink is a complete communication module which enables your products to communicate on an Powerlink network. The module supports fast communication speeds, making it suitable also for high-end industrial devices.

Anybus CompactCom M40 Module - Powerlink

Anybus
 X-gateway-mtcpm-mbtcps

Código: AB9008

The Anybus X-gateway provides a seamless connection between a Modbus TCP upper network and a secondary Modbus TCP sub-network. This makes it possible to extend a Modbus TCP network and devices without a secondary PLC system.

Anybus X-gateway - Modbus TCP Client - Modbus TCP Server

Anybus
 USS-gateways

Código: AB7044

The Anybus Communicator “USS” Gateway interconnects Siemens Drives with USS-Interface to Ethernet Modbus TCP. The Gateway acts as “Slave/Server” on the Ethernet side and operates as Master on the USS side. Up to 31 drives with USS-Interface can be simulta

Anybus Communicator - USS Master to Modbus TCP Server

Anybus
 USS-gateways

Código: AB7043

The Anybus Communicator “USS” gateway interconnects Siemens Drives with USS-Interface to PROFINET-IO. The Gateway acts as “Device/Slave” on the Profinet side and operates as Master on the USS side. Up to 31 drives with USS-Interface can be simultaneously

Anybus Communicator - USS Master to PROFINET-IO Device

Anybus
 ethernet-bluetooth

Código: 023140

Anybus® Wireless Bridge Ethernet - Bluetooth provides a proven wireless connection between Industrial Ethernet installations. It acts as a cable replacement gateway and is ideal for communication through hazardous areas, hard-to-reach locations or with mo

Anybus Wireless Bridge - Ethernet - Bluetooth

Anybus
 bluetooth-accesspoint

Código: 024130

Anybus® Wireless Bridge Ethernet Bluetooth Access Point is a rugged dual-mode Bluetooth (Bluetooth Smart Ready) access point with Bluetooth low energy gateway functionality. It allows up to seven Bluetooth devices to connect to the 10/100 Base-T Ethernet

Anybus Wireless Bridge - Ethernet - Bluetooth Access Point

Anybus
 x-gateway-pirs-pirs

Código: AB7962

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Device on both sides of the PROFINET-IRT network, providing a si

Anybus X-gateway – PROFINET-IRT Device – PROFINET-IRT Device

Anybus
 serial-bluetooth

Código: 024140

Anybus® Wireless Bridge Serial - Bluetooth is a rugged dual-mode Bluetooth (Bluetooth Smart Ready) serial-port adapter with Bluetooth low energy gateway functionality and u-blox Low Energy Serial Port Service. It allows connection for up to seven serial s

Anybus Wireless Bridge - Serial - Bluetooth

Anybus
 ethernet-wlan24

Código: 021440

Anybus® Wireless Bridge Ethernet - WLAN 2.4Ghz provides a proven wireless connection between Industrial Ethernet installations. It acts as a cable replacement gateway and is ideal for communication through hazardous areas, hard-to-reach locations or with

Anybus Wireless Bridge - Ethernet - WLAN 2.4 Ghz

Anybus
 Modbus RTU to TCP routing

Código: AB7702

With the Anybus Modbus gateway, you can connect Modbus RTU devices to Modbus-TCP networks. The gateway works as a translator (router) between the two networks allowing up to 32 Modbus RTU devices to be connected to a Modbus-TCP network.

Anybus Modbus RTU to TCP Gateway

Anybus
 ethernet-wlan5

Código: 021450

Anybus® Wireless Bridge Ethernet - WLAN 5 Ghz provides a proven wireless connection between Industrial Ethernet installations. It acts as a cable replacement gateway and is ideal for communication through hazardous areas, hard-to-reach locations or with m

Anybus Wireless Bridge - Ethernet - WLAN 5 Ghz

Anybus
 ethernet-wlan-dualband

Código: 024120

Anybus® Wireless Bridge Ethernet - WLAN Dual Band 2.4/5 Ghz provides a proven wireless connection between Industrial Ethernet installations. It acts as a cable replacement gateway and is ideal for communication through hazardous areas, hard-to-reach locat

Anybus Wireless Bridge - Ethernet - WLAN Dual Band 2.4/5 Ghz

Anybus
 Anybus Wireless Bolt Mounting and Connector

Código: AWB2000

Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).

Anybus Wireless Bolt - Ethernet

Anybus
 Anybus BACNet-IP to Modbus Gateway

Código: 024090

The Anybus BACnet to Modbus gateway allows Modbus devices to communicate on a BACnet/IP network. The gateway works as a translator between the two networks allowing Modbus RTU, ASCII or TCP devices to show up as individual BACnet-compliant devices on a BA

Anybus BACnet to Modbus Gateway

Anybus
 Anybus Wireless Bolt Mounting and Connector

Código: AWB2020

Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).

Anybus Wireless Bolt - CAN and Ethernet

Anybus
 abc-canopen

Código: AB7003

Integrate your serial RS-232/422/485 based industrial devices and equipment to a CANopen control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - CANopen

Anybus
 Anybus Wireless Bolt Mounting and Connector

Código: AWB2010

Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).

Anybus Wireless Bolt - Serial RS-232/485 and Ethernet

Anybus
 Anybus Communicator CC-Link IE Field

Código: AB7077

Integrate your serial RS-232/422/485 based industrial devices and equipment to a CC-Link IE Field control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - CC-Link IE Field

Anybus
 Anybus Communicator CC-Link

Código: AB7008

Integrate your serial RS-232/422/485 based industrial devices and equipment to a CC-Link control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - CC-Link

Anybus
 Anybus Communicator ControlNet

Código: AB7006

Integrate your serial RS-232/422/485 based industrial devices and equipment to a ControlNet control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - ControlNet

Anybus
 Anybus Communicator DeviceNet

Código: AB7001

Integrate your serial RS-232/422/485 based industrial devices and equipment to a DeviceNet control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - DeviceNet

Anybus
 Anybus Communicator EtherCAT

Código: AB7061

Integrate your serial RS-232/422/485 based industrial devices and equipment to a EtherCAT control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - EtherCAT

Anybus
 ABCEIP

Código: AB7072

Integrate your serial RS-232/422/485 based industrial devices and equipment to a EtherNet/IP control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - EtherNet/IP

Anybus
 serial-to-ethernet-ip-linkingdevice

Código: HMS-EN2SE-R

The Linking Device performs an intelligent protocol conversion and presents the serial data to the Logix PLC as easily processed I/O data. This offloads your Logix PLC from working with additional calculations. 

EtherNet/IP to Serial Linking Device

Anybus
 Anybus Communicator FIPIO

Código: AB7011

Integrate your serial RS-232/422/485 based industrial devices and equipment to a FIPIO control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - FIPIO

Anybus
 Anybus Communicator Interbus

Código: AB7012

Integrate your serial RS-232/422/485 based industrial devices and equipment to a Interbus control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - Interbus

Anybus
 Anybus Communicator Modbus Plus

Código: AB7002

Network enable your serial RS-232/422/485 based industrial devices and equipment to Modbus Plus without the need for any changes to the device. Just connect, configure and you're done! 

Anybus Communicator - Modbus Plus

Anybus
 Anybus Communicator Modbus RTU

Código: AB7010

Integrate your serial RS-232/422/485 based industrial devices and equipment to a Modbus RTU control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - Modbus RTU

Anybus
 Anybus Communicator Profibus

Código: AB7000

Integrate your serial RS-232/422/485 based industrial devices and equipment to a PROFIBUS control system without the need for any changes to the device. Just connect, configure and you're done!

Anybus Communicator - PROFIBUS

IXXAT

Código: 1.14.0415.00002

Handheld diagnostic device for the physical and
logical analysis of CAN bus systems

CANtouch® is a battery-operated handheld diagnostic device for the physical and logical analysis of CAN, CANopen, DeviceNet o

CANtouch

IXXAT

Código: 1.12.0157.00000

Powerful CANopen service and diagnostics
tool for service staff and developers

The IXXAT CANopen® Device Manager is a versatile and upgradeable tool aimed at device test, diagnostics, and field service tasks. Built aroun

CANopen Device Manager

IXXAT

Código: 1.12.0360.90000

Configuration editor and code generator for J1939 projects 

The SAE J1939 Designer is a powerful tool for creating and management of J1939 projects. A J1939 project consists of the definition of parameters (SPNs) and mes

SAE J1939 Designer

IXXAT

Código: 1.24.0034.03100

EtherNet/IP Scanner Simulator Tool

EIPScan is a Microsoft Windows-based software application that simulates an EtherNet/IP Scanner. EIPScan is an extremely useful tool for testing and debugging EtherNet/IP products during dev

EIPScan

IXXAT

Código: FRC-EP170

The Embedded Platform forms the basis for manifold automotive testing and analysis applications in vehicles and test benches – both, with the IXXAT ACT tools as well as with customer-specific software solutions.

 

FRC-EP 170

IXXAT

Código: FRC-EP190

The Embedded Platform forms the basis for manifold automotive testing and analysis applications in vehicles and test benches – both, with the IXXAT ACT tools as well as with customer-specific software solutions.

 

FRC-EP 190

IXXAT

Código: 1.01.0233.11000

Active PCI Express board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses

CAN-IB200/PCIe

IXXAT

Código: 1.01.0233.12001

Active PCI Express board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses

CAN-IB200/PCIe

IXXAT

Código: 1.01.0233.21000

Active PCI Express board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses

CAN-IB200/PCIe

IXXAT

Código: 1.01.0233.22001

Active PCI Express board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses

CAN-IB200/PCIe

IXXAT

Código: 1.01.0234.11000

Active PCI Express board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses

CAN-IB200/PCIe

IXXAT

Código: 1.01.0234.12001

Active PCI Express board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses

CAN-IB200/PCIe

IXXAT

Código: 1.01.0234.21000

Active PCI Express board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses

CAN-IB200/PCIe

IXXAT

Código: 1.01.0234.22001

Active PCI Express board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB200/PCIe HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses

CAN-IB200/PCIe

IXXAT

Código: 1.01.0231.11000

Passive PCI Express board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot

CAN-IB100/PCIe

IXXAT

Código: 1.01.0231.12001

Passive PCI Express board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot

CAN-IB100/PCIe

IXXAT

Código: 1.01.0231.21000

Passive PCI Express board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot

CAN-IB100/PCIe

IXXAT

Código: 1.01.0231.22001

Passive PCI Express board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot

CAN-IB100/PCIe

IXXAT

Código: 1.01.0232.11000

Passive PCI Express board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot

CAN-IB100/PCIe

IXXAT

Código: 1.01.0232.12001

Passive PCI Express board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot

CAN-IB100/PCIe

IXXAT

Código: 1.01.0232.21000

Passive PCI Express board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot

CAN-IB100/PCIe

IXXAT

Código: 1.01.0232.22001

Passive PCI Express board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB100/PCIe HMS offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot

CAN-IB100/PCIe

IXXAT

Código: 1.01.0237.11000

Passive PCI Express Mini board

1-2 x CAN (High-Speed)

With the CAN-IB120/PCIe Mini HMS offers an interface board specially designed for applications which require the implementation of a CAN interface with minimum space

CAN-IB120/PCIe Mini

IXXAT

Código: 1.01.0237.12000

Passive PCI Express Mini board

1-2 x CAN (High-Speed)

With the CAN-IB120/PCIe Mini HMS offers an interface board specially designed for applications which require the implementation of a CAN interface with minimum space

CAN-IB120/PCIe Mini

IXXAT

Código: 1.01.0237.21000

Passive PCI Express Mini board

1-2 x CAN (High-Speed)

With the CAN-IB120/PCIe Mini HMS offers an interface board specially designed for applications which require the implementation of a CAN interface with minimum space

CAN-IB120/PCIe Mini

IXXAT

Código: 1.01.0237.22000

Passive PCI Express Mini board

1-2 x CAN (High-Speed)

With the CAN-IB120/PCIe Mini HMS offers an interface board specially designed for applications which require the implementation of a CAN interface with minimum space

CAN-IB120/PCIe Mini

IXXAT

Código: 1.01.0238.12000

Passive PCI/104 Express board

1-2 x CAN (High-Speed)

With the CAN-IB130/PCIe 104 HMS offers a PCI/104-Express board based on a modern and highly modular concept. The card is available with up to two CAN channels and gal

CAN-IB130/PCIe 104

IXXAT

Código: 1.01.0238.22000

Passive PCI/104 Express board

1-2 x CAN (High-Speed)

With the CAN-IB130/PCIe 104 HMS offers a PCI/104-Express board based on a modern and highly modular concept. The card is available with up to two CAN channels and gal

CAN-IB130/PCIe 104

IXXAT

Código: 1.01.0239.22000

Active PCI/104-Express board

2/4 x CAN (High-Speed), 1 x CAN (Low-Speed), LIN

With the CAN-IB230/PCIe 104 HMS offers a PCI/104-Express board based on a modern and highly modular concept. The card covers the entire range

CAN-IB230/PCIe 104

IXXAT

Código: 1.01.0239.42001

Active PCI/104-Express board

2/4 x CAN (High-Speed), 1 x CAN (Low-Speed), LIN

With the CAN-IB230/PCIe 104 HMS offers a PCI/104-Express board based on a modern and highly modular concept. The card covers the entire range

CAN-IB230/PCIe 104

IXXAT

Código: 1.01.0291.11000

Passive PCI board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB300/PCI IXXAT offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot bracket

CAN-IB300/PCI

IXXAT

Código: 1.01.0291.12001

Passive PCI board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB300/PCI IXXAT offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot bracket

CAN-IB300/PCI

IXXAT

Código: 1.01.0291.22001

Passive PCI board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB300/PCI IXXAT offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot bracket

CAN-IB300/PCI

IXXAT

Código: 1.01.0292.12001

Passive PCI board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB300/PCI IXXAT offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot bracket

CAN-IB300/PCI

IXXAT

Código: 1.01.0292.22001

Passive PCI board

1-4 x CAN (High-/Low-Speed)

With the CAN-IB300/PCI IXXAT offers an interface board based on a modern and highly modular concept. The interface is available with a standard or a low-profile slot bracket

CAN-IB300/PCI

IXXAT

Código: 1.01.0293.11000

Active PCI board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB400/PCI HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as

CAN-IB400/PCI

IXXAT

Código: 1.01.0293.12001

Active PCI board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB400/PCI HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as

CAN-IB400/PCI

IXXAT

Código: 1.01.0293.21000

Active PCI board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB400/PCI HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as

CAN-IB400/PCI

IXXAT

Código: 1.01.0293.22001

Active PCI board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB400/PCI HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as

CAN-IB400/PCI

IXXAT

Código: 1.01.0294.12001

Active PCI board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB400/PCI HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as

CAN-IB400/PCI

IXXAT

Código: 1.01.0294.22001

Active PCI board

1-4 x CAN (High-/Low-Speed), LIN, K-Line

With the CAN-IB400/PCI HMS offers an interface board based on a modern and highly modular concept. The board covers the entire range of field buses, such as

CAN-IB400/PCI

IXXAT

Código: 1.01.0231.12010

Passive PCI Express board

1 x CAN (High-Speed), CAN FD

With the CAN-IB500/PCIe HMS offers a CAN FD interface based on a modern and highly modular architecture concept. The interface has one CAN channel which can se

CAN-IB500/PCIe

IXXAT

Código: 1.01.0233.12010

Active PCI Express board

1-2 x CAN (High-Speed), CAN FD

With the CAN-IB600/PCIe HMS offers a CAN FD interface based on a modern and highly modular architecture concept. The interface is available with up to two CAN

CAN-IB600/PCIe

IXXAT

Código: 1.01.0233.22010

Active PCI Express board

1-2 x CAN (High-Speed), CAN FD

With the CAN-IB600/PCIe HMS offers a CAN FD interface based on a modern and highly modular architecture concept. The interface is available with up to two CAN

CAN-IB600/PCIe

IXXAT

Código: 1.01.0070.10100

Passive PC/104 board

1-2 x CAN (High-Speed)

The PC-I 04/104 represents a low-priced solution for connecting a PC to a CAN network in applications with low performance requirements.

PC-I 04/104

IXXAT

Código: 1.01.0070.10200

Passive PC/104 board

1-2 x CAN (High-Speed)

The PC-I 04/104 represents a low-priced solution for connecting a PC to a CAN network in applications with low performance requirements.

PC-I 04/104

IXXAT

Código: 1.01.0070.11110

Passive PC/104 board

1-2 x CAN (High-Speed)

The PC-I 04/104 represents a low-priced solution for connecting a PC to a CAN network in applications with low performance requirements.

PC-I 04/104

IXXAT

Código: 1.01.0070.11220

Passive PC/104 board

1-2 x CAN (High-Speed)

The PC-I 04/104 represents a low-priced solution for connecting a PC to a CAN network in applications with low performance requirements.

PC-I 04/104

IXXAT

Código: 1.01.0288.11003

Active USB interface

2 x CAN (High-/Low-Speed), LIN

The USB-to-CAN V2 Plugin enables the simple design in of a CAN interface into customer devices. At this, the compact dimensions predestine the use in applic

USB-to-CAN V2 Plugin

IXXAT

Código: 1.01.0288.12003

Active USB interface

2 x CAN (High-/Low-Speed), LIN

The USB-to-CAN V2 Plugin enables the simple design in of a CAN interface into customer devices. At this, the compact dimensions predestine the use in applic

USB-to-CAN V2 Plugin

IXXAT

Código: 1.01.0288.22003

Active USB interface

2 x CAN (High-/Low-Speed), LIN

The USB-to-CAN V2 Plugin enables the simple design in of a CAN interface into customer devices. At this, the compact dimensions predestine the use in applic

USB-to-CAN V2 Plugin

IXXAT

Código: 1.01.0288.22043

Active USB interface

2 x CAN (High-/Low-Speed), LIN

The USB-to-CAN V2 Plugin enables the simple design in of a CAN interface into customer devices. At this, the compact dimensions predestine the use in applic

USB-to-CAN V2 Plugin

IXXAT

Código: 1.01.0057.10100

Passive PCI board

1-2 x CAN (High-Speed)

The PC-I 04/PCI represents a low-priced solution for connecting a PC to a CAN network in applications with low performance requirements.

This pr

PC-I 04/PCI

IXXAT

Código: 1.01.0057.10200

Passive PCI board

1-2 x CAN (High-Speed)

The PC-I 04/PCI represents a low-priced solution for connecting a PC to a CAN network in applications with low performance requirements.

This pr

PC-I 04/PCI

IXXAT

Código: 1.01.0057.11220

Passive PCI board

1-2 x CAN (High-Speed)

The PC-I 04/PCI represents a low-priced solution for connecting a PC to a CAN network in applications with low performance requirements.

This pr

PC-I 04/PCI

IXXAT

Código: 1.01.0043.10200

Active PC/104 board

1 x CAN (High-Speed)

The iPC-I 320/104 is an active CAN board with one CAN channel which is appropriate for a wide variety of CAN applications. Filtering, preprocessing, transmission and time-stamped

iPC-I 320/104

IXXAT

Código: CAN-IB410-PMC

Active PMC board

1-4 x CAN (High-/Low-Speed), LIN

(New product: available June 2016)

With the CAN-IB410/PMC HMS offers an interface board based on a modern and highly m

CAN-IB410/PMC

IXXAT

Código: 1.01.0049.33660

Active PMC board

2 x CAN (High-/Low-Speed), LIN

The iPC-I XC16/PMC is an active PMC board for 5 V and 3.3 V PMC bus systems with high/low-speed CAN interface and LIN interface. The on-board microcontroller offers f

iPC-I XC16/PMC

IXXAT

Código: CAN-IB210-XMC

Active XMC board

1-4 x CAN (High-/Low-Speed), LIN

(New product: available June 2016)

With the CAN-IB210/XMC HMS offers an interface board based on a modern and highly m

CAN-IB210/XMC

IXXAT

Código: 1.01.0047.33110

Active PCI board

1-2 x CAN (High-/Low-Speed)

The iPC-I XC16/PCI is an active CAN PCI interface for 5 V and 3.3 V PCI bus systems with optional Low-Speed bus interface. The on-board microcontroller offers filtering, prep

iPC-I XC16/PCI

IXXAT

Código: 1.01.0047.33220

Active PCI board

1-2 x CAN (High-/Low-Speed)

The iPC-I XC16/PCI is an active CAN PCI interface for 5 V and 3.3 V PCI bus systems with optional Low-Speed bus interface. The on-board microcontroller offers filtering, prep

iPC-I XC16/PCI

IXXAT

Código: 1.01.0047.33260

Active PCI board

1-2 x CAN (High-/Low-Speed)

The iPC-I XC16/PCI is an active CAN PCI interface for 5 V and 3.3 V PCI bus systems with optional Low-Speed bus interface. The on-board microcontroller offers filtering, prep

iPC-I XC16/PCI

IXXAT

Código: 1.01.0320.20110

Versatile industrial Ethernet PC interface with multi-protocol support

IXXAT INpact allows you to connect a PC to any industrial network. It combines proven Anybus technology with years of IXXAT know-how in the area of PC int

INpact CE Slave PCIe

IXXAT

Código: 1.01.0320.20120

Versatile industrial Ethernet PC interface with multi-protocol support

IXXAT INpact allows you to connect a PC to any industrial network. It combines proven Anybus technology with years of IXXAT know-how in the area of PC int

INpact CE Slave PCIe

IXXAT

Código: 1.01.0340.20101

Versatile industrial Ethernet PC interface with multi-protocol support

IXXAT INpact allows you to connect a PC to any industrial network. It combines proven Anybus technology with years of IXXAT know-how in the area of PC int

INpact CE Slave PCIe

IXXAT

Código: 1.01.0320.21110

Versatile industrial Ethernet PC interface for EtherCAT

The dedicated EtherCAT version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based EtherCAT Slave

INpact ECT Slave PCIe

IXXAT

Código: 1.01.0320.21120

Versatile industrial Ethernet PC interface for EtherCAT

The dedicated EtherCAT version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based EtherCAT Slave

INpact ECT Slave PCIe

IXXAT

Código: 1.01.0340.21101

Versatile industrial Ethernet PC interface for EtherCAT

The dedicated EtherCAT version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based EtherCAT Slave

INpact ECT Slave PCIe

IXXAT

Código: 1.01.0320.22110

Versatile industrial Ethernet PC interface for EtherNet/IP

The dedicated EtherNet/IP version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based EtherNet/

INpact EIP Slave PCIe

IXXAT

Código: 1.01.0320.22120

Versatile industrial Ethernet PC interface for EtherNet/IP

The dedicated EtherNet/IP version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based EtherNet/

INpact EIP Slave PCIe

IXXAT

Código: 1.01.0340.22101

Versatile industrial Ethernet PC interface for EtherNet/IP

The dedicated EtherNet/IP version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based EtherNet/

INpact EIP Slave PCIe

IXXAT

Código: 1.01.0320.25110

Versatile industrial Ethernet PC interface for Powerlink

The dedicated Powerlink version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based Powerlink Sl

INpact EPL Slave PCIe

IXXAT

Código: 1.01.0320.25120

Versatile industrial Ethernet PC interface for Powerlink

The dedicated Powerlink version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based Powerlink Sl

INpact EPL Slave PCIe

IXXAT

Código: 1.01.0340.25101

Versatile industrial Ethernet PC interface for Powerlink

The dedicated Powerlink version of the IXXAT INpact comes with a pre-installed network protocol. It enables the easy connection of PC-based Powerlink Sl

INpact EPL Slave PCIe

IXXAT

Código: 1.01.0103.00000

Cost effective FlexRay PCIexpress card for
analysis and control applications

The FR-IB100/PCIe is an extremely cost effective and high-performant interface card for FlexRay analysis and control applications as well as for a

FR-IB100/PCIe

IXXAT

Código: 1.01.0109.00111

Powerlink PCI interface board for
analysis and control applications

The Powerlink interface board enables the connection of PC host systems to Powerlink systems via the PCI bus. The Powerlink functionality runs complete

PL-IB 300/PCI

IXXAT

Código: 1.01.0109.00121

Powerlink PCI interface board for
analysis and control applications

The Powerlink interface board enables the connection of PC host systems to Powerlink systems via the PCI bus. The Powerlink functionality runs complete

PL-IB 300/PCI

IXXAT

Código: 1.01.0300.00001

The IXXAT Safe T100 offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category 4 in IEC 13849-1.

IXXAT Safe T100

IXXAT

Código: 022830-B

The IXXAT Safe T100 offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category 4 in IEC 13849-1.

IXXAT Safe T100

IXXAT

Código: 1.01.0250.20001

Flexible I/O Module for EtherCAT as board-level product or with rugged aluminum case

The EtherCAT I/O Module "ETCio 100" enables the quick and easy connection of analog and digital input and output signals to EtherCAT systems – whether in c

ETCio 100

IXXAT

Código: 1.01.0250.21001

Flexible I/O Module for EtherCAT as board-level product or with rugged aluminum case

The EtherCAT I/O Module "ETCio 100" enables the quick and easy connection of analog and digital input and output signals to EtherCAT systems – whether in c

ETCio 100

IXXAT

Código: 1.04.0086.00000

Flexible I/O Module for EtherCAT as board-level product or with rugged aluminum case

The EtherCAT I/O Module "ETCio 100" enables the quick and easy connection of analog and digital input and output signals to EtherCAT systems – whether in c

ETCio 100

IXXAT

Código: 1.01.0099.00000

Universal I/O gateway for CAN and CANopen systems

The CANio 250 enables the easy and quick connection of digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands or vehicles.

CANio 250

IXXAT

Código: 1.01.0099.00001

Universal I/O gateway for CAN and CANopen systems

The CANio 250 enables the easy and quick connection of digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands or vehicles.

CANio 250

IXXAT

Código: 1.01.0098.00000

Universal I/O gateway for CAN and CANopen systems

The CANio 500 enables the easy and quick connection of various analog and digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands

CANio 500

IXXAT

Código: 1.01.0098.00001

Universal I/O gateway for CAN and CANopen systems

The CANio 500 enables the easy and quick connection of various analog and digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands

CANio 500

IXXAT

Código: 1.01.0098.00002

Universal I/O gateway for CAN and CANopen systems

The CANio 500 enables the easy and quick connection of various analog and digital input and output signals to CAN or CANopen systems - whether in experimental setups, component test stands

CANio 500

IXXAT

Código: 1.03.0098.00000

Package for the easy development of customized applications on the CANio 250/500

As standard products, the CANio 250/500 represent an I/O gateway implementation in which the analog or digital inputs/outputs can be queried or triggered via C

CANio ADK

IXXAT

Código: 1.01.0281.12001

Active USB interface

2 x CAN (High-/Low-Speed), LIN

With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addr

USB-to-CAN V2

IXXAT

Código: 1.01.0281.12002

Active USB interface

2 x CAN (High-/Low-Speed), LIN

With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addr

USB-to-CAN V2

IXXAT

Código: 1.01.0281.11001

Active USB interface

2 x CAN (High-/Low-Speed), LIN

With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addr

USB-to-CAN V2

IXXAT

Código: 1.01.0282.12001

Active USB interface

2 x CAN (High-/Low-Speed), LIN

With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addr

USB-to-CAN V2

IXXAT

Código: 1.01.0283.22002

Active USB interface

2 x CAN (High-/Low-Speed), LIN

With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addr

USB-to-CAN V2

IXXAT
 Compact D-SUB 9 Version

Código: 1.01.0283.22042

Active USB interface

2 x CAN (High-/Low-Speed), LIN

With up to two CAN High Speed channels, one CAN Low Speed channel, and a LIN channel, depending on the device variant, a wide variety of applications can be addr

USB-to-CAN V2

IXXAT

Código: 1.01.0086.10200

Active Ethernet interface

1 x CAN (High-Speed)

The CAN@net II allows simple, flexible access from a PC to CAN systems via Ethernet. Due to its ability to support the TCP/IP protocol, the CA

CAN@net II/VCI

IXXAT

Código: 1.01.0126.12001

Active Bluetooth interface
1 x CAN (High-Speed)

The CANblue II is a reasonable and versatile CAN Bluetooth module, which can be used in a wide range of applications due three supported operation modes. 

For ser

CANblue II

IXXAT

Código: 1.01.0064.44000

ISO 11898-2 CAN repeater
with low-speed option

The CAN Repeater is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. One special feature of the Repeater is that it

CAN Repeater

IXXAT

Código: 1.01.0064.46000

ISO 11898-2 CAN repeater
with low-speed option

The CAN Repeater is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. One special feature of the Repeater is that it

CAN Repeater

IXXAT

Código: 1.01.0067.44010

Modular ISO 11898-2 CAN repeater
with backbone bus

The CAN-CR200 is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. Several CAN-CR200 can be connected to a CAN-hub v

CAN-CR200

IXXAT

Código: 1.04.0073.00000

Modular ISO 11898-2 CAN repeater
with backbone bus

The CAN-CR200 is used for the galvanic isolation of two segments of a CAN network and for creating star or tree topologies. Several CAN-CR200 can be connected to a CAN-hub v

CAN-CR200

IXXAT

Código: 1.01.0067.44400

ISO 11898-2 CAN repeater
with 4 kV galvanic isolation

The CAN-CR220 is used for the galvanic isolation of two segments of a CAN network and offers a very high galvanic isolation of 4 kV, allowing it be utilized in medical a

CAN-CR220

IXXAT

Código: 1.01.0067.44300

ISO 11898-2 CAN repeater
with 4 kV galvanic isolation

The CAN-CR220 is used for the galvanic isolation of two segments of a CAN network and offers a very high galvanic isolation of 4 kV, allowing it be utilized in medical a

CAN-CR220

IXXAT

Código: 1.01.0063.01020

Converter from ISO 11898
to fiber optic cable

The FO Repeater is used for the conversion of the CAN-signal from copper wire (ISO 11898-2) to fiber optic cables. This provides a complete isolation and protection against

FO Repeater

IXXAT

Código: 1.01.0068.45010

Stackable converter from
ISO 11898-2 to fiber optic cable

The CAN-CR210/FO is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. This provides a complete isolation and protection

CAN-CR210/FO

IXXAT

Código: 1.01.0068.46010

Stackable converter from
ISO 11898-2 to fiber optic cable

The CAN-CR210/FO is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables. This provides a complete isolation and protection

CAN-CR210/FO

IXXAT

Código: 1.01.0121.11020

Configurable CAN-to-CAN Bridge

The CANbridge allows the coupling of two CAN networks, including networks with different bit rates. The bridge has a powerful 16-bit microcontroller that can process bursts at higher data r

CANbridge

IXXAT

Código: 1.01.0121.22020

Configurable CAN-to-CAN Bridge

The CANbridge allows the coupling of two CAN networks, including networks with different bit rates. The bridge has a powerful 16-bit microcontroller that can process bursts at higher data r

CANbridge

IXXAT

Código: 1.01.0120.22010

Configurable CAN-to-CAN Bridge

The CANbridge allows the coupling of two CAN networks, including networks with different bit rates. The bridge has a powerful 16-bit microcontroller that can process bursts at higher data r

CANbridge

IXXAT

Código: 1.01.0120.23010

Configurable CAN-to-CAN Bridge

The CANbridge allows the coupling of two CAN networks, including networks with different bit rates. The bridge has a powerful 16-bit microcontroller that can process bursts at higher data r

CANbridge

IXXAT

Código: 1.01.0120.22020

Configurable CAN-to-CAN Bridge

The CANbridge allows the coupling of two CAN networks, including networks with different bit rates. The bridge has a powerful 16-bit microcontroller that can process bursts at higher data r

CANbridge

IXXAT

Código: 1.01.0086.10201

CAN-Ethernet gateway and
CAN-Ethernet-CAN bridge

The CAN@net II/Generic enables easy and flexible access to
CAN systems via Ethernet. The device provides two operation
modes, a bridge mode and a gateway mo

CAN@net II/Generic

IXXAT

Código: 1.01.0332.20000

CAN-Ethernet gateway and CAN-Ethernet-CAN
bridge with two CAN channels

CAN@net NT 200 enables easy and flexible access to CAN systems via Ethernet. The device has two operating modes and can be u

CAN@net NT 200

IXXAT

Código: 1.01.0033.20000

RS232-CAN converter

With the CAN-GW100/RS232, devices with a serial RS232 port can be connected to the CAN bus. Two modes are available for use in CAN and CANopen networks.

This product

CAN-GW100/RS232

IXXAT

Código: 1.01.0261.02106

PROFINET CANopen Gateway

The IXXAT CME/PN is a powerful and easily configurable gateway for connecting CANopen devices and networks to PROFINET systems. The gateway enables bi-directional data exchange allowing for both the i

IXXAT CME/PN

IXXAT

Código: 1.01.0130.00000

LIN-CAN-Gateway

The LIN-CAN gateway is a universal device for both the analysis of LIN networks (Local Interconnect Network) via the CAN bus and for the emulation of LIN slave or master modules. In addition, the device can be

LIN2CAN

IXXAT

Código: 1.01.0130.91000

LIN-CAN-Gateway

The LIN-CAN gateway is a universal device for both the analysis of LIN networks (Local Interconnect Network) via the CAN bus and for the emulation of LIN slave or master modules. In addition, the device can be

LIN2CAN

IXXAT

Código: 1.01.0271.00051

Stand-alone embedded PC for DIN rail mounting
with multi-protocol support

IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devic

IXXAT Econ 100

IXXAT

Código: 1.02.0271.10003

Stand-alone embedded PC for DIN rail mounting
with multi-protocol support

IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devic

IXXAT Econ 100

IXXAT

Código: 1.02.0271.00003

Stand-alone embedded PC for DIN rail mounting
with multi-protocol support

IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devic

IXXAT Econ 100

IXXAT

Código: 1.24.0271.10002

Stand-alone embedded PC for DIN rail mounting
with multi-protocol support

IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devic

IXXAT Econ 100

IXXAT

Código: 1.24.0271.00002

Stand-alone embedded PC for DIN rail mounting
with multi-protocol support

IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devic

IXXAT Econ 100

IXXAT

Código: 1.24.0271.10001

Stand-alone embedded PC for DIN rail mounting
with multi-protocol support

IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devic

IXXAT Econ 100

IXXAT

Código: 1.24.0271.00001

Stand-alone embedded PC for DIN rail mounting
with multi-protocol support

IXXAT Econ 100 is a stand-alone embedded PC for real-time Industrial Ethernet, suitable for many applications – from small material handling devic

IXXAT Econ 100

IXXAT

Código: 1.02.0122.TTDDC

Software package for the development of
CANopen slave or simple CANopen master devices

The CANopen Protocol Software includes all necessary functions to implement slave or simple master devices according to the CANopen s

CANopen Protocol Software

IXXAT

Código: 1.02.0124.TTDDC

Software package for the development of
CANopen slave or simple CANopen master devices

The CANopen Protocol Software includes all necessary functions to implement slave or simple master devices according to the CANopen s

CANopen Protocol Software

IXXAT

Código: 1.02.0222.TTDDC

Software package for the development of
CANopen slave or simple CANopen master devices

The CANopen Protocol Software includes all necessary functions to implement slave or simple master devices according to the CANopen s

CANopen Protocol Software

IXXAT

Código: 1.02.0224.TTDDC

Software package for the development of
CANopen slave or simple CANopen master devices

The CANopen Protocol Software includes all necessary functions to implement slave or simple master devices according to the CANopen s

CANopen Protocol Software

IXXAT

Código: 1.02.0175.TTDDC

Software package for the development
of CANopen master devices

The CANopen Manager Software is a very powerful software package that is optimally tailored at the implementation of complex CANopen manager devices. In part

CANopen Manager Software

IXXAT

Código: 1.02.0212.xxxxx

Real-time-capable software package for the development
of
CANopen slave or simple CANopen master devices

The CANopenRT Software is an optimized version of the CANopen Protocol Software featuring enhanced in

CANopen RealTime Software

IXXAT

Código: 1.02.0214.xxxxx

Real-time-capable software package for the development
of
CANopen slave or simple CANopen master devices

The CANopenRT Software is an optimized version of the CANopen Protocol Software featuring enhanced in

CANopen RealTime Software

IXXAT

Código: 1.02.0351.x0000

Software package for the development of J1939 Devices

Cross-platform protocol software in accordance with SAE J1939. Combined with the SAE J1939 CAN driver, the protocol software allows quick and easy development of J1939 dev

SAE J1939 Protocol Software

IXXAT

Código: 1.02.0351.x0001

Software package for the development of J1939 Devices

Cross-platform protocol software in accordance with SAE J1939. Combined with the SAE J1939 CAN driver, the protocol software allows quick and easy development of J1939 dev

SAE J1939 Protocol Software

IXXAT

Código: 1.24.0031.01000

Software package for the development of
EtherNet/IP Adapter devices

The EtherNet/IP Adapter Software enables developers of PC based or embedded products to quickly add EtherNet/IP Adapter Class functionality to a product

EtherNet/IP Adapter Software

IXXAT

Código: 1.24.0030.01000

Software package for the development of
EtherNet/IP Adapter devices

The EtherNet/IP Adapter Software enables developers of PC based or embedded products to quickly add EtherNet/IP Adapter Class functionality to a product

EtherNet/IP Adapter Software

IXXAT

Código: 1.02.0353.x0000

NMEA2000 transport protocol and services as
an extension for the J1939 protocol software

With the NMEA2000 extension for J1939, the IXXAT J1939 protocol software can be expanded for NMEA2000 applications. The software packa

SAE J1939 NMEA2000 Extension

IXXAT

Código: 1.02.0353.x0001

NMEA2000 transport protocol and services as
an extension for the J1939 protocol software

With the NMEA2000 extension for J1939, the IXXAT J1939 protocol software can be expanded for NMEA2000 applications. The software packa

SAE J1939 NMEA2000 Extension

IXXAT

Código: 1. 02.0352.x0000

ISO15765-2 CAN diagnostic protocol as
an extension for the J1939 protocol software

With the ISO15765-2 extension for J1939, the IXXAT J1939 protocol software can be extended with the CAN diagnostic protocol. This represents

SAE J1939 ISO15765-2 Extension

IXXAT

Código: 1. 02.0352.x0001

ISO15765-2 CAN diagnostic protocol as
an extension for the J1939 protocol software

With the ISO15765-2 extension for J1939, the IXXAT J1939 protocol software can be extended with the CAN diagnostic protocol. This represents

SAE J1939 ISO15765-2 Extension

IXXAT

Código: 1.02.0350.00TTT

Software package for connection of the
J1939 protocol software to the target hardware

The SAE J1939 CAN driver provides all necessary functions for connection of the J1939 protocol software to the target hardware and sup

SAE J1939 CAN Driver

IXXAT

Código: 1.24.0033.01000

Software package for the development of
EtherNet/IP Scanner devices

The EtherNet/IP Scanner Software enables developers of PC based or embedded products to quickly add EtherNet/IP Scanner Class functionality to a product

EtherNet/IP Scanner Software

IXXAT

Código: 1.24.0032.01000

Software package for the development of
EtherNet/IP Scanner devices

The EtherNet/IP Scanner Software enables developers of PC based or embedded products to quickly add EtherNet/IP Scanner Class functionality to a product

EtherNet/IP Scanner Software

IXXAT

Código: 1.12.0132.00000

Software package for the development of CANopen
service and test applications under Windows

The CANopen® Master API is a software package targeted at rapid development of CANopen master applications on a PC using Windows

CANopen Master API

IXXAT

Código: 1.12.0134.00000

Software package for the implementation
of complex PC-based CANopen control solutions

The CANopen® Manager API represents an ideal basis for the implementation of complex PC-based CANopen control solutions. This package

CANopen Manager API

IXXAT

Código: 1.12.0287.00000

Software package for the development of J1939
service and test applications under Windows

The J1939 API is a programming interface that allows quick and easy development of J1939 applications on a PC with Windows operating

SAE J1939 API

IXXAT

Código: 1.12.0318.20000

Tool for monitoring and configuration of IEEE 1588-2008 PTP networks

The PTP Manager allows monitoring, configuration and testing of an IEEE 1588-2008 network. The configuration of all detected PTP clocks can be simply viewed

IEEE 1588 PTP Manager

IXXAT

Código: 1.12.0248.00001

ACT (Automotive Configuration Tool) is a powerful and easy to use PC software package for the FRC-EP Embedded Platforms with versatile functions.

ACT Bundle

IXXAT

Código: 1.12.0248.00000

ACT (Automotive Configuration Tool) is a powerful and easy to use PC software package for the FRC-EP Embedded Platforms with versatile functions.

ACT Gateway Bundle

IXXAT

Código: 1.02.0502.xx0xx

The implementation of the IXXAT FSoE protocol software (Functional Safety over EtherCAT®) is characterized by efficient protocol processing, which is essential for safe drive applications, for example. The FSoE software allows parallel instantiation, b

FSoE Master/Slave Software

IXXAT

Código: 1.02.0502.xx1xx

The implementation of the IXXAT FSoE protocol software (Functional Safety over EtherCAT®) is characterized by efficient protocol processing, which is essential for safe drive applications, for example. The FSoE software allows parallel instantiation, b

FSoE Master/Slave Software

IXXAT

Código: 1.02.0501.20000

The IXXAT CIP Safety Software can be used for implementing CIP Safety Targets (slaves) and CIP Safety originator (master) devices based on EtherNet/IP or Sercos. When using Sercos as a non-secure communication protocol, all necessary adaptation modules

CIP Safety Originator / Target Software

IXXAT

Código: 1.02.0501.20100

The IXXAT CIP Safety Software can be used for implementing CIP Safety Targets (slaves) and CIP Safety originator (master) devices based on EtherNet/IP or Sercos. When using Sercos as a non-secure communication protocol, all necessary adaptation modules

CIP Safety Originator / Target Software

IXXAT

Código: 1.02.0500.20000

The IXXAT CIP Safety Software can be used for implementing CIP Safety Targets (slaves) and CIP Safety originator (master) devices based on EtherNet/IP or Sercos. When using Sercos as a non-secure communication protocol, all necessary adaptation modules

CIP Safety Originator / Target Software

IXXAT

Código: 1.02.0500.20100

The IXXAT CIP Safety Software can be used for implementing CIP Safety Targets (slaves) and CIP Safety originator (master) devices based on EtherNet/IP or Sercos. When using Sercos as a non-secure communication protocol, all necessary adaptation modules

CIP Safety Originator / Target Software

IXXAT
 CM CANopen Module

Código: 021620-B

The CM CANopen enables system integrators to connect any CANopen or CAN 2.0A device to the SIMATIC S7-1200 PLC. The module plugs into the communication module interface of the S7-1200 and acts as a bridge between the CANopen or CAN devices and the SIMATIC

CM CANopen

IXXAT
 1SI CANopen Module

Código: 020570-B

The 1 SI CANopen module brings CANopen connectivity to the SIMATIC ET200S modular I/O system, enabling full integration between devices on a CANopen network and the ET200S. Furthermore, the addition of 1 SI CANopen module into the ET200S system allows a C

1 SI CANopen

IBHsoftec
 IBH_LINK_S7++

Código: 20266

If a Siemens PLC has to be connected with a PC via Ethernet, the normal way is to take a CP / Communication processor. IBHsoftec has a more flexible solution: IBH Link S7++.

IBH Link S7++

IXXAT
 USB-to-CAN FD embedded

Código: 1.01.0352.12001

The USB-to-CAN FD has – depending on the device variant – up to two channels, which support three switchable operation modes: ISO CAN FD, non ISO CAN FD and CAN High-Speed. The automotive variant provides also one LIN channel.

USB-to-CAN FD embedded

IXXAT
 USB-to-CAN FD automotive

Código: 1.01.0353.22012

The USB-to-CAN FD has – depending on the device variant – up to two channels, which support three switchable operation modes: ISO CAN FD, non ISO CAN FD and CAN High-Speed. The automotive variant provides also one LIN channel.

USB-to-CAN FD automotive

Anybus
 Anybus Wireless bridge ii AWB3010 descripcion

Código: AWB3000

This second generation of the proven and trusted Wireless Bridge can communicate via both Bluetooth and WLAN and is ideal for communication through hazardous areas or hard-to-reach locations where cables are not desirable.

Anybus Wireless Bridge II - Ethernet

IXXAT

Código: 1.12.0133.31000

Powerful Tool for Development, Testing and Service

The canAnalyser is a versatile tool for the development, testing and servicing of CAN, CAN FD and LIN based systems. The software package is based on a modular concept and a

canAnalyser lite/standard

IXXAT

Código: 1.12.0166.31000

Powerful Tool for Development, Testing and Service

The canAnalyser is a versatile tool for the development, testing and servicing of CAN, CAN FD and LIN based systems. The software package is based on a modular concept and a

canAnalyser lite/standard

IXXAT

Código: 1.12.0145.30000

CANopen Interpreter for canAnalyser

As an addition to the canAnalyser, the CANopen Module interprets all received CAN messages according to the CANopen specifications CiA301 (incl. SDO block transfer), CiA302 (incl. Flying Maste

CANopen Module

IXXAT

Código: 1.12.0148.30000

DeviceNet Interpreter for canAnalyser

As an addition to the canAnalyser, the DeviceNet module interprets all received CAN messages according to the ODVA DeviceNet standard and displays the received parameters according to Messag

DeviceNet Module

IXXAT

Código: 1.12.0149.30000

SAE J1939 Interpreter for canAnalyser

As an addition to the canAnalyser, the J1939 Module provides the display of received messages according to the SAE J1939 notation. This includes the interpretation of received J1939 messages

J1939 Module

IXXAT

Código: 1.01.0097.00000

Installation tester for CAN networks

CANcheck allows users to analyze CAN networks during commisioning, maintenance and helps searching faults. This battery-operated, hand-held device connects to the CAN network t

CANcheck

IXXAT

Código: 1.14.0415.00000

Handheld diagnostic device for the physical and
logical analysis of CAN bus systems

CANtouch® is a battery-operated handheld diagnostic device for the physical and logical analysis of CAN, CANopen, DeviceNet o

CANtouch

IXXAT

Código: 1.14.0402.00001

Powerful tool for analysis of
CAN bus physics and CAN protocol

The CAN-Bus-Tester 2 is a universal measuring instrument for the commissioning, analysis, monitoring, troubleshooting and maintenance of CAN bus systems.

CAN-Bus-Tester 2 (CBT2)

IXXAT

Código: 1.14.0402.00002

Powerful tool for analysis of
CAN bus physics and CAN protocol

The CAN-Bus-Tester 2 is a universal measuring instrument for the commissioning, analysis, monitoring, troubleshooting and maintenance of CAN bus systems.

CAN-Bus-Tester 2 (CBT2)

IXXAT

Código: 1.04.0410.00000

Diagnostic tool for the long-term
monitoring of CAN bus systems

The CANobserver is a diagnostic tool for physical and logical long-term monitoring of CAN-bus systems and is designed as a locally installed supplement to the CAN-Bus-Tes

CANobserver

IXXAT

Código: 1.14.0415.00001

Handheld diagnostic device for the physical and
logical analysis of CAN bus systems

CANtouch® is a battery-operated handheld diagnostic device for the physical and logical analysis of CAN, CANopen, DeviceNet o

CANtouch

Acksys
 WLn-LINK-OEM

Código: WLn-LINK-OEM-TTL/R

WLn-LINK-OEM embedded module is a 2.4 / 5 GHz IEEE 802.1a/b/g/n solution designed to quickly and easily add wireless LAN to a wide range of wired Ethernet OEM products.

WLn-LINK-OEM

Acksys
 WLn-LINK-OEM

Código: WLn-LINK-OEM-EVAL/R

WLn-LINK-OEM embedded module is a 2.4 / 5 GHz IEEE 802.1a/b/g/n solution designed to quickly and easily add wireless LAN to a wide range of wired Ethernet OEM products.

WLn-LINK-OEM

Acksys
 WLg-LINK-OEM Compact access point, Ethernet bridge & repeater (WDS)

Código: WLg-LINK-OEM-RJ

When used in Access Point mode, the WLg-LINK-OEM is the root element of an industrial WiFi Ethernet network. When used as a Bridge, it makes it possible to connect any Ethernet 10/100 industrial equipment to this network.

WLg-LINK-OEM

Acksys
 WLg-LINK-OEM Compact access point, Ethernet bridge & repeater (WDS)

Código: WLg-LINK-OEM-TTL

When used in Access Point mode, the WLg-LINK-OEM is the root element of an industrial WiFi Ethernet network. When used as a Bridge, it makes it possible to connect any Ethernet 10/100 industrial equipment to this network.

WLg-LINK-OEM

Acksys
 WLg-DONGLE-OEM

Código: WLg-DONGLE-OEM-232

WLg-DONGLE-OEM gives access to any serial equipment from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, making it possible to communicate between two distant serial equipments through the network, or directly with a peer t

WLg-DONGLE-OEM

Acksys
 WLg-DONGLE-OEM

Código: WLg-DONGLE-OEM-TTL

WLg-DONGLE-OEM gives access to any serial equipment from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, making it possible to communicate between two distant serial equipments through the network, or directly with a peer t

WLg-DONGLE-OEM

Acksys
 Ethernet Air-Pack Ready-to-use point-to-point wireless Ethernet bridge

Código: Ethernet Air-PACK

Ethernet-Air-Pack is a ready-to-use solution designed to replace any Ethernet cable between equipments (PC, IP video, printers ...), replace the network cable between the RJ45-wall outlet and the computer or even to establish a wireless bridge between two

Ethernet Air-Pack

Acksys
 PMXNOW0300 WiFi access point, 3-port Ethernet bridge & repeater (WDS)

Código: PMXNOW0300

PMXNOW0300 is a single slot backplane compatible module that allows the M340/M580 processors to interface easily with the WiFi wireless network in order to communicate with devices located remotely.

PMXNOW0300

Acksys
 WLg-4LAN WiFi access point and bridge with 4-port Ethernet switch

Código: WLg-4LAN

When used in access point mode, WLg-4LAN is the root element of an industrial WiFi Ethernet network. When used as bridge, it allows connecting up to 4 Ethernet 10/100 devices to this network.

WLg-4LAN

Acksys
 WLg-LINK Compact access point, Ethernet bridge & repeater (WDS)

Código: WLg-LINK

When used in the Access Point mode, the WLg-LINK is the root element of an industrial WiFi Ethernet network. When used as a Bridge, it makes it possible to connect any Ethernet 10/100 industrial equipment to this network.

WLg-LINK

Acksys
 WLg-DONGLE

Código: WLg-DONGLE

WLg-DONGLE gives access to any serial equipment from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network, or directly with a peer to peer

WLg-DONGLE

PAPOUCH
 PoE Splitter

Código: PoE_Splitter

PoE Splitter can Power over Ethernet devices that do not have this feature by default. If ordered with TME, Gnome232 or other Papouch device, the Splitter will be equipped with a cable corresponding with that device.

PoE Splitter

PAPOUCH
 Technical drawing of the wall holder

Código: HLD_WALL_55100

Metal wall holder for Papouch devices with dimensions 100 x 55 mm. For example TME PoE, etc.

Wall holder

PAPOUCH
 Technical drawing of the wall holder

Código: HLD_WALL_5550

Metal wall holder for Papouch s.r.o. devices with dimensions 55 x 50 mm.

Wall holder

PAPOUCH
 Low profile SD2microSD adapter

Código: RASP_SD_ADAPT

Shortened microSD to standard SD card adapter designed specifically for Raspberry SD card slot. It holds tightly in place and does not overlap the Raspberry footprint.

SD to microSD adapter for Raspberry Pi

PAPOUCH
 Wie232 - Wiegand converter to RS232

Código: WIE232

Wiegand is a standard interface used in contactless card readers. Wie232 is able to convert the Wiegand interface to a format usable by a standard serial port (RS232). Thus, standard contactless card readers can be easily connected to a PC or similar syst

Wie232

PAPOUCH
 CQ485 - RS485-422 repeater and isolator

Código: CQ485

CQ485 is an RS485 and RS422 repeater, converter and isolator in one device. Both sides are galvanically isolated. Communication speed up to 921.6 kBd. Easy setup software included. Configuration via USB interface.

CQ485

PAPOUCH
 TCP2RTU RS485 version

Código: TCP2RTU_RS485

TCP2RTU is a transparent both directions converter of the MODBUS TCP protocol, running over Ethernet, into the MODBUS RTU/ASCII protocol, running over RS232, RS485 and RS422 lines. TCP2RTU works both directions since version 1.4. Either as a Modbus gatewa

TCP2RTU

PAPOUCH
 GNOME232 - Ethernet to RS232 converter

Código: GNOME232

Inexpensive 10/100 Ethernet to RS232 converter. Suitable for extending the RS232 serial line over the Ethernet. Virtual serial port. Power supply ranging from 4.5 up to 75V. Protocols: TCP/IP, UDP. Configuration via web interface.

GNOME232

PAPOUCH
 Wie485 - Wiegand converter to RS485

Código: WIE485

Wiegand is a standard interface used in contactless card readers. Wiegand to RS485 bidirectional interface converter. Thus, standard contactless card readers can be easily connected to a PC or similar system wia RS485 interface.

Wie485

PAPOUCH
 GNOME485 - Ethernet to RS485 converter

Código: GNOME485

Inexpensive Ethernet - RS485 converter. Enables a device with RS485 to easily connect to the Ethernet or to extend the RS485 line via the Ethernet. Power supply 5 to 30V. Virtual COM port. Protocols: TCP/IP, UDP.

GNOME485

PAPOUCH
 GNOME422 - Ethernet to RS422 converter

Código: GNOME422

GNOME422 is a simple Ethernet to RS422 converter. It enables a device with RS422 to easily connect to the Ethernet, to extend the RS422 line via the Ethernet or to establish a network of RS422 via the Ethernet. Power supply 5 to 30V. Virtual serial port.

GNOME422

PAPOUCH
 SB232 - USB to RS232 converter

Código: SB232_1

Isolated industrial USB to RS232 converter. Easy installation: A virtual COM port is created on your Windows PC. Easily usable also in Linux OS.

SB232

PAPOUCH
 SB485 - USB to RS485-422 converter

Código: SB485S_1

Robust industrial and isolated USB to RS485, RS422 and RS422 multimaster (multidrop) converter. Allows you to simply install a virtual COM port on your Windows PC.

SB485

PAPOUCH
 SB485L - Basic USB to RS485 Converter

Código: SB485L

The basic version of USB to RS485 converter. Galvanic isolation, small size, fixed communication parameters.

SB485L

PAPOUCH
 QuidoDuplex RS - Extender of digital I-Os_ RS485

Código: QUIDO_DUP_RS_4_1

QuidoDuplex RS is a set of two I/O modules for RS485 line (two wires only) with a special firmware designed specificaly to transmit digital I/Os over RS485 line as an autonomous system - no PCs or PLCs needed. If one input is turned on, the corresponding

QuidoDuplex RS

PAPOUCH
 QuidoDuplex ETH - Extender of digital I-Os_ Ethernet

Código: QUIDO_DUP_ETH_4_1

QuidoDuplex ETH is a set of two I/O modules for Ethernet (LAN, computer network) with a special firmware designed specificaly to transmit digital I/Os over Ethernet as an autonomous system - no PCs or PLCs needed. If one input is turned on, the correspond

QuidoDuplex ETH

PAPOUCH
 THT2 - Intelligent RS485 sensor

Código: THT2

Main module for digital sensors of temperature and humidity with dew point calculation. Communicaters via RS485 line - up to 1.2Km. Metal enclosure, detachable sensor (not included, sold separately).

THT2

PAPOUCH
 papago-2th-thermometer-and-humidity-to-wifi

Código: PGO_2TH_W_EU

Two combined sensors with WiFi interface. It measures only temperature or temperature, humidity and dew point. Temperatures measured in the range from -55 to +125 °C.

Papago 2TH WIFI

PAPOUCH
 2pt-eth-celoeth_v

Código: PGO_2PT_W_EU

Thermometer for Pt100 or Pt1000 with two inputs and WiFi interface; high electrical precision of 0.01°C, temperature range from -200 to +850°C (according to the connected sensor).

Papago 2PT WIFI

PAPOUCH
 papago-2tc-thermocouple-to-wifi

Código: PGO_2TC_W_EU

Thermometer for thermocouples of type K with two inputs and WiFi interface. The accuracy depends on the thermocouple. Measuring range -50 to +1350 °C.

Papago 2TC WiFi

VScom
 VScom 200Ei-SI PCIex

Código: 4506

The VScom 200Ei-SI PCIex is designed for RS232, RS422/485 industrial communication. It supports 2 independent RS232, RS422 or RS485 ports. Each port can be configured separate.Available modes : RS232, RS422 fullduplexRS485 full duplex (4 wire)RS485 half d

VScom 200Ei-SI PCIex

PAPOUCH
 Pt100 for -90 to +250 °C_ metal rod

Código: SNS_PT100-90-250

Pt100 sensor in a metal rod. 4 mm in diameter for a temperature range of -90 to +250°C. Teflon cable 3 m.

Pt100

VScom
 VScom 200Ei PCIex

Código: 4505

The VScom 200Ei PCIex is designed for RS232, RS422/485 industrial communication. It supports 2 independent RS232, RS422 or RS485 ports. Each port can be configured separate.Available modes : RS232, RS422 fullduplexRS485 full duplex (4 wire)RS485 half dupl

VScom 200Ei PCIex

PAPOUCH
 UC232 - RS232 Isolator

Código: UC232

UC232 is a complete RS232 isolator of all signals. It protects your PC, notebook or a different device against ground loops and overvoltage.

UC232

PAPOUCH
 UC485S

Código: UC485S

The UC485 module converts an RS232 line to RS485 or RS422. The module settings can be set using DIP switches. UC485 come s either double or triple isolated. RS485/RS422 line has overvoltage protection. Two versions are availabe: D-SUB 9 connectors or a sl

UC485

PAPOUCH
 TDS - RS485 7-Segment LED display

Código: TDS

TDS module from the TQS product line is a four digit 7-segment LED display with two universal indicators. TDS communicates over RS485 line via a simple protocol.

TDS

PAPOUCH
 AD4RS - RS232 a RS485 measurement mobule

Código: AD4RS_U

Analog measurement module AD4RS is a four input A/D converter allowing you to measure up to four analogue signals 0-10V or 0(4)-20mA. Measured out values are send to a PC or other system by means of RS232 or RS485 line.

AD4RS

VScom
 CP-134U PCI

Código: 749

The CP-134 Universal PCI series is designed the new slot standard for expansion Boards and works with both 3.3V and 5.0V server slots.CP 132U offers two independent RS422 / 485, and each port can control up to 32 devices in a multidrop environment.

CP-134U PCI

PAPOUCH
 TQS3 P - RS485 thermometer to be placed on a pipe

Código: TQS3_P

RS485 digital thermometer for pipe temperature measuremet. Measuring range is  -55 to +125 °C. Thermometer communicates via RS485 line on Spinel or MODBUS RTU protocol. The TQS3 intelligent temperature sensor can be connected to other modules by a single

TQS3 P

VScom
 CP-132U-I PCI

Código: 747

The CP-132 Universal PCI series is designed the new slot standard for expansion Boards and works with both 3.3V and 5.0V server slots.CP 132U offers two independent RS422 / 485, and each port can control up to 32 devices in a multidrop environment.

CP-132U-I PCI

PAPOUCH
 A Look Inside

Código: TQS3_O

A digital thermometer for RS485; outdoor design with IP65 protection. It measures temperatures in the range from -55 ° C to +125 ° C and the measured value is sent in degrees Celsius. The thermometer has very low consumption and communicates via Spinel or

TQS3 O

VScom
 CP-132UL PCI

Código: 748

The CP-132 Universal PCI series is designed the new slot standard for expansion Boards and works with both 3.3V and 5.0V server slots.CP 132U offers two independent RS422 / 485, and each port can control up to 32 devices in a multidrop environment.

CP-132UL PCI

PAPOUCH
 TQS3 I - RS485 Interior thermometer

Código: TQS3_I

Digital thermometer in an indoor make - for in-building temperature measurement. Measuring range is  -55 to +125 °C. Thermometer communicates via RS485 line on Spinel or MODBUS RTU protocol. The TQS3 intelligent temperature sensor can be connected to othe

TQS3 I

VScom
 VScom 200I-SI UPCI

Código: 4439

The VScom 200I-SI uPCI is designed for RS232, RS422/485 industrial communication. It supports 2 independent RS232, RS422 or RS485 ports. Each port can be configured separate.Available modes : RS232, RS422 fullduplexRS485 full duplex (4 wire)RS485 half dup

VScom 200I-SI UPCI

VScom
 VScom 200I UPCI

Código: 4438

The VScom 200I uPCI is designed for RS232, RS422/485 industrial communication. It supports 2 independent RS232, RS422 or RS485 ports. Each port can be configured separate.Available modes : RS232, RS422 fullduplexRS485 full duplex (4 wire)RS485 half duplex

VScom 200I UPCI

PAPOUCH
 THT2 I Interior thermometer and hygrometer

Código: THT2I

Sensor for temperature and humidity with dew point calculation. Comunication via RS485 line. Plastic enclosure with vent holes for interiors. To be mounted on wall or ceiling.

THT2 I Interior thermometer and hygrometer

VScom
 VScom 400I UPCI

Código: 4440

The VScom 400I uPCI is designed for RS232, RS422/485 industrial communication. It supports 4 independent RS232, RS422 or RS485 ports. Each port can be configured separate.Available modes : RS232, RS422 fullduplexRS485 full duplex (4 wire)RS485 half duplex

VScom 400I UPCI

PAPOUCH
 TM - RS232 thermometer

Código: TM

TM is a cheap RS232 serial thermometer with measuring range from -55°C to +125°C. It communicates in a simple ASCII format.

TM

VScom
 VScom 800I UPCI

Código: 4441

The VScom 800I uPCI is designed for RS232, RS422/485 industrial communication. It supports 8 independent RS232, RS422 or RS485 ports. Each port can be configured separate.Available modes : RS232, RS422 fullduplexRS485 full duplex (4 wire)RS485 half duplex

VScom 800I UPCI

PAPOUCH
 AD4USB - USB A-D measurement module

Código: AD4USB_U

AD4USB measuring converter is a 4-input A/D converter which enables the user to measure to four current inputs ranging from 0(4) to 20 mA or voltage between 0 and 10 V. The measured values are then transferred to a superior system in digital form. The AD4

AD4USB

PAPOUCH
 AD4ETH - Ethernet measurement module

Código: AD4ETH_U_1

Analog measurement module AD4ETH is a four input A/D converter allowing you to measure up to four analogue signals 0-10V or 0(4)-20mA. Measured-out values can be viewed via a WEB interface, AD4ETH also supports TCP, SNMP, Modbus and many other protocols.

AD4ETH

PAPOUCH
 TDS - Industrial thermometer

Código: TDS_THERM

TDS thermometer can display temperature measured by TQS3 thermometers, that communicate via RS485 line and can be up to 1200m away from it. Temperature is displayed on a 7-segment LED display. In this way you can read-out up to three temperatures in diffe

TDS

PAPOUCH
 TQS3 M - RS485 Thermometer with the probe on a cable

Código: TQS3_M

TQS3 M Thermometer has been discontinued. As a replacement you can use THT2 which is fully compatible product. As a succesor to the TQS3 M, THT2 has a detachable sensor of various lengths, higher range of power voltage and a possibility to connect tempera

TQS3 M

PAPOUCH
 Communication options and internal website of anemometer.

Código: WINDETH_EU

WindETH is an Ethernet anemometer, which is able to measure wind speed and direction. It is connected directly to a computer network (Ethernet). Current measurements are also available via internal WEB interface or various formats like HTTP GET, XML, MODB

WindETH

PAPOUCH
 tme-multi-top-side

Código: TME_MULTI_1

A device for measuring temperature and humidity at up to 32 locations. Configuration and preview of all measured values via a website. TME multi is able to send the current values to the server using HTTP GET requests and can also communicate via SNMP and

TME multi

VScom
 VScom 200L UPCI Power

Código: 4477

The L-series is an economic solution for standard applications. The serial ports are based on a 16C550A UART with 16 byte FIFO. The eightfold maximum speed allows some irregular transmission rates.Vscom 200L UPCI Power provides configurable power supply t

VScom 200L UPCI Power

PAPOUCH
 Papago 2TH ETH- 2x temperature_ humidity and dew point with Ethernet

Código: PGO_2TH_E_1

Ethernet interface with PoE power supply for two combined sensors. It measures only temperature or temperature, humidity and dew point. Temperatures measured in the range from -55 to +125 °C.

Papago 2TH ETH

PAPOUCH
 TH2E with sensor (the sensor must be ordered separately!)

Código: TH2E_C_EU

TH2E is a Thermometer and Hygrometer that can calculate a dew point. It can store measured-out values into its internal memory, send the measured-out values to your server, send e-mails when a threshold is exceeded, TH2E remembers extremes and it has an i

TH2E

PAPOUCH
 TME with a DIN rail holder.

Código: TME_C_EU

TME is a Thermometer with direct output to Ethernet (IP Thermometer), Measuring range is -55°C to +125°C.

TME

PAPOUCH
 TMU - USB thermometer

Código: TMU_C_1

TMU is a simple thermometer with a USB interface. The thermometer uses the USB interface for communication and also as a power source. It measures temperatures from –55 °C to +125 °C. The communication utilizes a simple ASCII protocol. Temperature values

TMU

PAPOUCH
 TME PoE - PoE powered ethernet thermometer

Código: TME_POE_1

TME PoE is a PoE powered ethernet Thermometer. It complies with IEEE 802.3af standard. Thanks to that there are no additional power units needed. TME PoE comes out of TME, other than power circuits and internal hardware layout the thermometers have the ve

TME PoE

PAPOUCH
 Papago TH 2DI DO ETH- Environment monitor

Código: PGO_TH2DIDO_E_1

PAPAGO TH 2DI DO is used as an environment monior – it measures temperature, humidity and dew point. It also has two contact inputs to connect either contact or a pulse output and a relay.

Papago TH 2DI DO ETH

PAPOUCH
 papago-2tc-thermocouple-k-connectors

Código: PAPAGO_2TC_ETH_1

Thermometer for thermocouples of type K with two inputs and Ethernet interface with PoE. The accuracy depends on the thermocouple. Measuring range -50 to +1350 °C.

Papago 2TC ETH

PAPOUCH
 2pt-eth-celoeth_v

Código: PGO_2PT_E_1

Thermometer for Pt100 or Pt1000 with two inputs and Ethernet interface with PoE; high electrical precision of 0.01°C, temperature range from -200 to +850°C (according to the connected sensor).

Papago 2PT ETH

PAPOUCH
 TM_Mikrotik- thermometer for Mikrotik RouterBOARDs

Código: TM_Mikrotik2

This version of thermometer TM is designed specifically for Mikrotik RouterBOARDs. Thermometer is connected to the RouterBOARD’s serial port and it is powered from the same port. With this thermometer you can measure temperature from 2 points or monitor a

TM_Mikrotik

PAPOUCH
 Wind gadget settings

Código: TX20ETH_EU

TX20ETH is no longer available - it has been replaced with WindETH Anemometer which is fully compatible. The name had to be changed not to be tied to a specific sensor.

TX20ETH

VScom
 CP-114 IS PCI

Código: 783

The CP-114 IS PCI is designed for RS232 and RS422/485 industrial communication. It supports 4 switchselectable, independent RS232 and RS422/485 ports. Each RS422/485 port can control up to 32 devices in a multidrop environment.Applications can easi

CP-114 IS PCI

VScom
 CP-114 I PCI

Código: 782

The CP-114 I PCI is designed for RS232 and RS422/485 industrial communication. It supports 4 switchselectable, independent RS232 and RS422/485 ports. Each RS422/485 port can control up to 32 devices in a multidrop environment.Applications can easil

CP-114 I PCI

VScom
 CP-114 PCI

Código: 773

The CP-114 PCI is designed for RS232 and RS422/485 industrial communication. It supports 4 switchselectable, independent RS232 and RS422/485 ports. Each RS422/485 port can control up to 32 devices in a multidrop environment.Applications can easily

CP-114 PCI

VScom
 CP-132IS PCI

Código: 737

The CP-132 series is designed for RS422 / 485 industrial communication. It supports 2 independent RS422 or RS485 ports, and each port can control up to 32 devices in a multidrop environment.Applications can easily manage the data transmitting and r

CP-132IS PCI

VScom
 CP-132I PCI

Código: 735

The CP-132 series is designed for RS422 / 485 industrial communication. It supports 2 independent RS422 or RS485 ports, and each port can control up to 32 devices in a multidrop environment.Applications can easily manage the data transmitting and r

CP-132I PCI

EKS Engel
 DL CAN / DL CAN-R

Código: DL CAN / DL CAN-R

The systems DL CAN connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.

DL CAN / DL CAN-R

VScom
 CP-132 PCI

Código: 733

The CP-132 series is designed for RS422 / 485 industrial communication. It supports 2 independent RS422 or RS485 ports, and each port can control up to 32 devices in a multidrop environment.Applications can easily manage the data transmitting and r

CP-132 PCI

EKS Engel
 DL232-MUX

Código: DL232-MUX

The system DL232-MUX is a multiplexer for 4xRS232 signals, working bidirectionally via fiber optics. Thus, in addition to the RxD and TxD signals, hardware-handshake signals as RTS, CTS, DCD, DSR and DTR can be transferred, too.

DL232-MUX

EKS Engel
 DL TTY

Código: DL TTY

The system DL TTY forms an asynchronous TTY- interface (20 mA active, half-active or passive) which can be operated in two ways: either half-duplex or full-duplex (please note the schematics opposite).

DL TTY

EKS Engel
 IOL3000

Código: IOL3000

The fiber optic system IOL3000 transmits digital signals (e.g., contact closures, control-signals) and analog signals via fiber optics.

IOL3000

EKS Engel
 IOL3200

Código: IOL3200

The fiber optic system IOL3200 transmits digital signals (e.g., contact closures, control-signals) via fiber optics.

IOL3200

EKS Engel
 XL-Optical Bypass

Código: XL-Optical Bypass

x-light ensures a safe communication even in case of device failure by optically bypassing the defective node so that a permanent data transmission is guaranteed. x-light is manufacturer and protocol independent so that it perfectly integrates into every

XL-Optical Bypass

EKS Engel
 EL100-XS

Código: EL100-XS

The series EL100-XS contains unmanaged media converters which operate with POF, HCS-, multimode or singlemode fiber optic. Additional features are autonegotiation, MDX/MDIX and extended temperature range

EL100-XS

EKS Engel
 EL100-S

Código: EL100-S

e-light S consists of a compact Ethernet media converter including M50 screwing and pre-assembled fiber optic cables with singlemode or multimode fibers, which are available in customized versions.

EL100-S

EKS Engel
 EL100-3U / EL100-3UP

Código: EL100-3U / EL100-3UP

The EL100-3U and EL100-3UP (with PoE-function) media converters have an extra small housing with a dimension of 82 x 93 x 22.5 mm. Its features are Auto-Negotiation and Auto MDX/MDIX

EL100-3U / EL100-3UP

EKS Engel
 EL1000-3G

Código: EL1000-3G

The EL1000-3G media converters have an extra small housing with a dimension of 82 x 93 x 22.5 mm. Its features are Auto-Negotiation and Auto MDX/MDIX.

EL1000-3G

VScom
 VS-EVB-AM335x

Código: 6836

The Developer Board VS-EVB-AM335x is an example for use of VS-SOM-AM335x System-On-Module. This Developer Board realizes the interfaces as named in the standard configuration of VS-SOM-AM335x. It has the connectors and necessary interface circuits to make

VS-EVB-AM335x

EKS Engel
 EL 100-REG

Código: EL100-REG

The product series e-light REG consists of industrial basic switches that support Fast Ethernet. Their housing is build according to DIN 43880 and thus they can flexibly be mounted in either switch cabinets or distribution boards.

EL100-REG

VScom
 VS-SOM-AM335x

Código: 6834

The VS-SOM-AM335x is a System-On-Module, in small SODIMM form factor. It features Texas Instruments Sitara AM335x ARM Cortex-A8 32-bit RISC processors. This is accompanied by DDR3 and NAND Flash memory, plus EEPROM and optional WLAN b/g/n. The processor p

VS-SOM-AM335x

EKS Engel
 EL100-4U

Código: EL100-4U

The EL100-4U series “Essential Line“ comprises five industrial basic switches for Fast Ethernet. Since they are only 3 cm in width they do not need much space. In case of extremely flat installation space the DIN rail clip can be fixed at the side.

EL100-4U

EKS Engel
 EL100-X

Código: EL100-X

The series EL100-X contains unmanaged 4-Port-switches for 10/100 MBit/s with optionally up to four RJ45-Ethernet-Ports and up to two optical ports which operate with POF, HCS-, multimode or singlemode fiber optic

EL100-X

EKS Engel
 EL100-2U

Código: EL100-2U

The series EL100-2U contains unmanaged 6/7/8-Port-switches for 10/100 MBit/s with optionally up to eight RJ45-Ethernet-Ports and up to three optical ports which operate with POF, HCS-, multimode or singlemode fiber optic.

EL100-2U

VScom
 ModGate Plus 113

Código: 6710

The Modgate Plus (or Modgate+) are easy to use Gateways from Modbus/TCP on Ethernet or WLAN to Modbus/RTU or Modbus/ASCII on the serial ports. Modgate+ 113 connects one Modbus serial line to a network running TCP/IP. Metal case, wide temperature range and

ModGate Plus 113

EKS Engel
 EL1000-2G

Código: EL1000-2G

The series EL1000-2G contains unmanaged 7-port-switches for 10/100/1000MBit/s with 3 x TX + 4 x FX and 5 x TX + 2 x FX ports, which operate with multimode or singlemode fiber optic

EL1000-2G

VScom
 ModGate Plus 213

Código: 6720

The Modgate Plus (or Modgate+) are easy to use Gateways from Modbus/TCP on Ethernet or WLAN to Modbus/RTU or Modbus/ASCII on the serial ports. Modgate+ 213 connects two Modbus serial lines to a network running TCP/IP. Metal case, wide temperature range an

ModGate Plus 213

EKS Engel
 EL100-2MA

Código: EL100-2MA

EL100-2MA is an 8 port switch that features ring function based on the Media Redundancy Protocol (MRP) with a recovery time of less than 300 ms.

EL100-2MA

VScom
 ModGate Plus 413

Código: 6730

The Modgate Plus (or Modgate+) are easy to use Gateways from Modbus/TCP on Ethernet or WLAN to Modbus/RTU or Modbus/ASCII on the serial ports. Modgate+ 413 connects four Modbus serial lines to a network running TCP/IP. Metal case, wide temperature range a

ModGate Plus 413

VScom
 ModGate Plus 813

Código: 6740

The Modgate Plus (or Modgate+) are easy to use Gateways from Modbus/TCP on Ethernet or WLAN to Modbus/RTU or Modbus/ASCII on the serial ports. Modgate+ 813 connects eight Modbus serial lines to a network running TCP/IP. Metal case, wide temperature range

ModGate Plus 813

VScom
 VScom NetCAN Plus 120 WLAN

Código: 429

The VScom NetCAN+ 120 WLAN is an easy to use gateway from Ethernet to CAN-Bus, based on state of the art RISC components. It provides CAN-BUS communication over Ethernet and WLAN, and allows completely secured communication for both data transfer and conf

VScom NetCAN Plus 120 WLAN

VScom
 VScom NetCAN Plus 110

Código: 424

The VScom NetCAN+ 110 is an easy to use gateway from Ethernet to CAN-Bus, based on state of the art RISC components. It provides CAN-BUS communication over Ethernet and WLAN, and allows completely secured communication for both data transfer and configura

VScom NetCAN Plus 110

EKS Engel
 FIMP

Código: FIMP

With 115 mm x 61 mm x 113 mm, our industrial splice box is by far smaller than comparable 19‘‘solutions.

FIMP

EKS Engel
 FIMP-REG

Código: FIMP-REG

The industrial splice box FIMP-REG according to DIN 43880 is by far smaller that comparable 19"solutions.

FIMP-REG

EKS Engel
 FIMP-S

Código: FIMP-S

With 120mm x 32mm x 120mm, our industrial splice box FIMP-S is by far smaller than comparable 19‘‘solutions. Its inner values are really convincing as well so that the installation is quite simple and done very fast.

FIMP-S

EKS Engel
 FIMP-XL

Código: FIMP-XL

The inner values of the FIMP-XL are really convincing and the installation is quite simple and done very fast

FIMP-XL

EKS Engel
 FIMP-XL-HYBRID

Código: FIMP-XL-HYBRID

FIMP-XL Hybrid combines two different worlds: Glass fiber and copper cables. It provides a high level of flexibility for your application since it has optical connectors for up to 12 fibers and 6 RJ45 connectors for network cables

FIMP-XL-HYBRID

VScom
 EmRunner H plus e1

Código: 287

Targeting automotive applications the EmRunner H plus e1 has been approved by Kraftfahrt-Bundesamt with e1 certification. This CarPC has been designed for telematic and map-navigation applications, offering high shock resistance and low power consumption

EmRunner H plus e1

RESI
 RESI-ENOCEAN-ANT

Código: RESI-ENOCEAN-ANT

Antenna 116mm length included, the antenna can be rotated 360° and tilt 90°, SMA connector, 868MHz

RESI-ENOCEAN-ANT

VScom
 EmRunner 5326 DIN RAIL

Código: 266

The really small and robust embedded system! Fan less, Low Power Consumption, Professional construction inside!

EmRunner 5326 DIN RAIL

Acksys
 xRSUNI range

Código: 2RSUNI-232-9

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 xRSUNI range

Código: 4RSUNI-232-9

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 xRSUNI range

Código: 8RSUNI-232-9

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 xRSUNI range

Código: 2RSUNI-400-9

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 xRSUNI range

Código: 4RSUNI-400-25

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 xRSUNI range

Código: 4RSUNI-400-I

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

VScom
 EmRunner 5312 DIN RAIL

Código: 234

The really small and robust embedded system! Fan less, Low Power Consumption, Professional construction inside!

EmRunner 5312 DIN RAIL

Acksys
 xRSUNI range

Código: 8RSUNI-400-25

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 xRSUNI range

Código: 4RSUNI-232-9-LP

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 xRSUNI range

Código: 4RSUNI-400-I-LP

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 xRSUNI range

Código: 8RSUNI-232-9-LP

The new range of universal PCI serial multi-port boards from ACKSYS combines high performance, ease of use, robustness at very competitive prices. This multipurpose range includes 2, 4 and 8 channel boards for RS232, RS422 or RS485.

xRSUNI range

Acksys
 UNXUNI range Industrial 4 & 8 ports serial boards

Código: UNXUNI-TTL-4

PCI bus based, it is jumperless configurable.

UNXUNI range

Acksys
 UNXUNI range Industrial 4 & 8 ports serial boards

Código: UNXUNI-TTL-8

PCI bus based, it is jumperless configurable.

UNXUNI range

VScom
 TaskRunner 103 (NISE 103)

Código: 3612

Designed with Intel® D425 1.8 GHZ processor and ICH8M embedded chipset and 12VDC input to take a low power consumption advantage,TaskRunner 103 is a compact fanless industrial computing housed in a size of 185mm x 131mm x 54mm. The TaskRunner 103 supports

TaskRunner 103 <dfn>(NISE 103)</dfn>

VScom
 TaskRunner 104 (NISE 104)

Código: 3610

TaskRunner 104 series are based on the Intel Atom Dual Core D2550 processor. With Atom Dual Core D2550 CPU, DDR3 memory and multiple I/O ports, TaskRunner 104 series can be utilized within industrial automation, self-service machines like KIOSK check-in m

TaskRunner 104 <dfn>(NISE 104)</dfn>

VScom
 TaskRunner 2100A (NISE 2100A)

Código: 3194

TaskRunner 2100 series are based on the Intel Atom Dual Core D525 processor. With Atom Dual Core D525 CPU, DDR3 memory and multiple I/O ports, TaskRunner 2100 series can be utilized within industrial automation, self-service machines like KIOSK check-in m

TaskRunner 2100A <dfn>(NISE 2100A)</dfn>

VScom
 TaskRunner 2100 (NISE 2100)

Código: 3199

TaskRunner 2100 series are based on the Intel Atom Dual Core D525 processor. With Atom Dual Core D525 CPU, DDR3 memory and multiple I/O ports, TaskRunner 2100 series can be utilized within industrial automation, self-service machines like KIOSK check-in m

TaskRunner 2100 <dfn>(NISE 2100)</dfn>

VScom
 TaskRunner 2300 (NISE 2300)

Código: 3626

TaskRunner 2300 series are powered by the Intel Atom Dual Core D2550 processor with higher graphic and computer performance. With its outstanding performance, TaskRunner 2300 series can be utilized within industrial automation, self-service machines like

TaskRunner 2300 <dfn>(NISE 2300)</dfn>

VScom
 TaskRunner 2200 (NISE 2200)

Código: 3620

TaskRunner 2200 series are powered by the Intel Atom Dual Core D2550 processor with higher graphic and computer performance. With its outstanding performance, TaskRunner 2200 series can be utilized within industrial automation, self-service machines like

TaskRunner 2200 <dfn>(NISE 2200)</dfn>

VScom
 TaskRunner 2410E (NISE 2410E)

Código: 3632

Powered by Intel Atom Bay Trail Quad Core processor E3845, 1.91GHz, TaskRunner 2410E can provide excellent computing power and is more power-efficient than the platforms based on the previous generation of Intel Atom processor family.TaskRunner 2410E supp

TaskRunner 2410E <dfn>(NISE 2410E)</dfn>

VScom
 TaskRunner 2400 -dfn-(NISE 2400)--dfn-

Código: 3630

Powered by Intel Atom Bay Trail Dual Core processor E3827, 1.75GHz, TaskRunner 2400 can provide excellent computing power and is more power-efficient than the platforms based on the previous generation of Intel Atom processor family.TaskRunner 2400 suppor

TaskRunner 2400 <dfn>(NISE 2400)</dfn>

Acksys
 RD300-OFR Universal serial RS232-RS422-RS485 to multimode optic fiber media converter (4 ST type connectors )

Código: RD300-OFR

Using fiber optic enables to use a higher communication bandwidth while offering a total immunity against EMI/RFI interferences and an increased security as well.

RD300-OFR

Acksys
 RD320-OFR Universal serial RS232-RS422-RS485 to single-mode optic fiber media converter (4 SC type connectors )

Código: RD320-OFR

Using fiber optic enables to use a higher communication bandwidth while offering a total immunity against EMI/RFI interferences and an increased security as well.

RD320-OFR

VScom
 RISE 3310

Código: 3883

The RISE series of DinRail-PC is designed for harsh industrial environments. It features fanless and cableless, low power consumption and operating over wide temperature ranges. Its reliable design allows to withstand mechanical vibrations, extremely hot

RISE 3310

VScom
 RISE 4300

Código: 3870

The RISE series of DinRail-PC is designed for harsh industrial environments. It features fanless and cableless, low power consumption and operating over wide temperature ranges. Its reliable design allows to withstand mechanical vibrations, extremely hot

RISE 4300

RESI
 RESI-POTI-AO-TOP

Código: RESI-POTI-AO

Converts a potentiometer with 2 wire or 3 wire connection into an analogue output signal between 0 to 10Vdc, 2 wire connection: potentiometer with 1kOhm, 2kOhm, 5kOhm or 10kOhm resistors can be used, 3 wire connection: potentiometer with 1kOhm till 100kOh

RESI-POTI-AO

Acksys
 COMETH RS232 compact single port server

Código: COMETH-LITE

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, making it possible to communicate between two distant serial equipments through the network or even build an Ethernet

COMETH

Acksys
 COMETH-FIELD-RD RS232-RS422-RS485 DIN Rail single port server

Código: COMETH-FIELD-RD

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, making it possible to communicate between two distant serial equipments through the network or even build an Ethernet

COMETH-FIELD-RD

Acksys
 COMETH-EMBD Serial TTL PCB single port server

Código: COMETH-EMBD

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network or even build an Ethernet /

COMETH-EMBD

Acksys
 COMETH-EMBD Serial TTL PCB single port server

Código: COMETH-EMBD-ETH

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network or even build an Ethernet /

COMETH-EMBD

Acksys
 COMETH-EMBD Serial TTL PCB single port server

Código: COMETH-EMBD-EVAL

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network or even build an Ethernet /

COMETH-EMBD

RESI
 RESI-RS485BA-ISO-WT-L.png

Código: RESI-RS485BA

Passive RS485 bus terminator with 2 bus termination units for 2 individual RS485 bus lines, for each termination unit: DIP switch selector for bus termination function: 120Ohm resistor and 1µF capacitor can be switched on and off, 3 pin terminal for RS485

RESI-RS485BA

Acksys
 AD400E RS232 -- RS422-RS485 converter

Código: AD400E

Designed to connect directly to PCs, this converter has a female SUB D9 connector to the RS232 port and a screw-in connecrting terminal for the RS-422/485 port.

AD400E

VScom
 TaskRunner VTC 6100

Código: 3154

Targeting automotive applications the TaskRunner VTC 6100 with e13 certification. This CarPC has been designed for telematic and map-navigation applications, offering high shock resistance and low power consumption of max 20W from 12-24V sources. Combinde

TaskRunner VTC 6100

VScom
 TaskRunner VTC 2000

Código: 3153

Targeting automotive applications the TaskRunner VTC 2000 with e13 certification. This CarPC has been designed for telematic and map-navigation applications, offering high shock resistance and low power consumption of max 20W from 12-24V sources. Combinde

TaskRunner VTC 2000

RESI
 RESI-16DI8RO-MODBUS

Código: RESI-16DI8RO-MODBUS

MODBUS/RTU module to control socket-outlets, light applications and capacitive loads, with 8 bistable relays (max 250Vac, max

RESI-16DI8RO-MODBUS

RESI
 RESI-16DI8RO-MODBUS

Código: RESI-16DI8RO-ASCII

MODBUS/RTU or ASCII module to control socket-outlets, light applications and capacitive loads, with 8 bistable relays (max 250Vac, max

RESI-16DI8RO-ASCII

Acksys
 RailBox Rugged dual 802.11ac WiFi access point, client & repeater for railways

Código: RailBox/RRXB

RailBox is a rugged device designed for railway and light rail applications. It can be mounted in trains, subways, trams or in any equipment that requires robustness and mobility.

RailBox

Acksys
 WLn-RailBox Dual 11n WiFi access point, client, repeater & MESH point for railways

Código: WLn-RailBox/R[P]

WLn-RailBox is a rugged device designed for railway and light rail applications. It can be mounted in trains, subways, trams for positive train control (PTC), fare collection, maintenance, remote management, wayside and track monitoring and in any equipme

WLn-RailBox

Acksys
 WLg-xROAD-S

Código: WLg-xROAD/S

WLg-xROAD/S gives access to any serial equipments from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network, or directly with a peer to pe

WLg-xROAD/S

Acksys
 WLg-xROAD-N

Código: WLg-xROAD/N

WLg-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailer

WLg-xROAD/N

RESI
 RESI-ENOCEAN-GW-ISO-WT-L

Código: RESI-ENOCEAN-GW

Connects a host with serial interface to an ENOCEAN radio system, Radio standard ENOCEAN 868Mhz ISO/IEC 14543-3-10, Host communication: via RS232 or RS485 with serial ENOCEAN protocol ESP3 (EnOcean Serial Protocol 3) , Host baud rates: 9600, 19200, 38400

RESI-ENOCEAN-GW

Acksys
 WLg-xROAD-N

Código: WLg-xROAD/NP

WLg-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailer

WLg-xROAD/N

Acksys
 WLg-ABOARD

Código: WLg-ABOARD/N [H4]

WLg-ABOARD/N is a rugged equipment designed for applications in railways (CBTC architectures), on-road, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounte

WLg-ABOARD

Acksys
 WLg-ABOARD

Código: WLg-ABOARD/NP [H4]

WLg-ABOARD/N is a rugged equipment designed for applications in railways (CBTC architectures), on-road, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounte

WLg-ABOARD

Acksys
 WLg-ABOARD

Código: WLg-ABOARD/NI [H4]

WLg-ABOARD/N is a rugged equipment designed for applications in railways (CBTC architectures), on-road, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounte

WLg-ABOARD

Frontline
 NetDecoder

Código: NetDecoder

Frontline's NetDecoder™ protocol analyzer, an award winning software, is designed to diagnose and troubleshoot communication problems in industrial networks. Frontline's NetDecoder analyzer has the ability to monitor and provide detailed timing, data and

NetDecoder™

Acksys
 WLg-ABOARD-NPI[H4]

Código: WLg-ABOARD/NPI [H4]

WLg-ABOARD/N is a rugged equipment designed for applications in railways (CBTC architectures), on-road, marine transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounte

WLg-ABOARD

VScom
 VS-860

Código: 6850

The VS-860 is a RISC Panel PC, an industrial embedded computer based on ARM Cortex-A8. It features an integrated 8" display panel with resistive Touch function. The great variety of interfaces like LAN/WLAN, CFast, USB, Bluetooth, serial interface plus mo

VS-860

Frontline
 CC-Link Analyzer in NetDecoder

Código: CC-Link_Analyzer_in_NetDecoder

The NetDecoder – CC-Link Analyzer is a comprehensive data capture, debugging, network monitoring and analysis tool for troubleshooting CC-Link networks. The NetDecoder software works with Frontline’s CC-Link ComProbe to capture CC-Link serial data.

CC-Link Analyzer in NetDecoder

Frontline
 USB-to-ControlNet-Cable

Código: NetDecoder-ControlNet-Analyzer

Encompass Product Partner The NetDecoder - ControlNet analyzer provides a comprehensive troubleshooting and diagnostics solution for solving communication problems on ControlNet networks

NetDecoder-ControlNet-Analyzer

Frontline
 USB-to-DeviceNet-Cable

Código: NetDecoder-DeviceNet Analyzer

The NetDecoder - DeviceNet analyzer provides a comprehensive troubleshooting and diagnostics solution for solving communication problems on DeviceNet networks.

NetDecoder-DeviceNet Analyzer

Acksys
 AIRTRACK-S4 WiFi access point, client & repeater

Código: AIRTRACK-S4 [Hx]

AIRTRACK-S4 is a rugged equipment designed for underground mines for: tele-operation of heavy machinery from a remote control station, collision avoidance, localization of people and goods and other services as evacuation signaling systems, Voice over Int

AIRTRACK-S4

NetModule
 Extension Modules

Código: extension-modules

The NetModule Router architecture is based on a modular concept that allows a high degree of product customization. Providing a product family specific number of PCI express mini card slots on the router main board, the router may be extended with up to s

Extension Modules

Frontline
 USB-to-Data Highway Plus Cable 1784-U2DHP

Código: NetDecoder-DH+_Analyzer

The NetDecoder - DH+ Analyzer is a comprehensive data capture, debugging, network monitoring and analysis tool for troubleshooting DH+ networks.

NetDecoder - DH+ Analyzer

Acksys
 WLg-ACCESS-ATEX [H4]

Código: WLg-ACCESS-ATEX [H4]

WLg-ACCESS-ATEX is designed for industrial applications in explosive environment like chemical industries, refineries, electric stations, very dusty environments and also those where sparks and electric arcs occur...

WLg-ACCESS-ATEX

Frontline
 RS232-comprobe II-kit

Código: RS-232 ComProbe II

To keep pace with advances in technology, the NetDecoder™ analyzer has been upgraded to support the new "RS-232 ComProbe II". Most new laptops and PCs do not have PCMCIA interfaces and the PC industry has migrated towards USB ports.

Frontline’s “RS-232 ComProbe II”

Frontline
 rs422-485-comprobe

Código: RS-422/485-ComProbe

To keep pace with advances in technology, the tried and true NetDecoder™ analyzer has been upgraded to support the new "RS-422/485 ComProbe". Most new laptops and PCs do not have PCMCIA interfaces and the PC industry has migrated towards USB ports.

RS-422/485 ComProbe

Frontline
 Ethernet comprobe

Código: Ethernet-ComProbe

Frontline Test Equipment is pleased to announce the release of a compact, portable, aggregating Ethernet network tap that interfaces to the PC via USB

Ethernet ComProbe

Frontline
 ETDashView

Código: Ethertest

TROUBLESHOOT COMMUNICATIONS – QUICKLY REDUCE DOWNTIME AND INCREASE PRODUCTION. Ethertest is a general purpose Ethernet communications monitor and protocol analyzer for 10Mbps, 100Mbps and 1Gbps Ethernet local area networks.

Ethertest

IXXAT
 Interfaz-CANblue II

Código: 1.01.0126.12000

The CANblue II is a reasonably priced and versatile CAN Bluetooth module, which can be used in a wide range of applications due three supported operation modes.

CANblue II

NetModule

Código: cloud_router

Cloud Router acts as intermediary between control stations and NetModule Routers in the field. Cloud Router is a software package for Debian Linux.

NetModule Cloud Router

NetModule
 NB1600-mobile

Código: NB1600-L

The NB1600 mobile router brings mobile broadband to the DIN rail or any other place where a fixed Internet connection is unavailable, unsuitable and too expensive. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway,

NB1600 LTE/4G Router

VScom
 Alekto 2

Código: 6820

The OnRISC Alekto 2 is a RISC industrial embedded computer based on ARM Cortex-A8 with NEON SIMD Coprocessor. The great variety of interfaces like LAN, CFast, USB, I²C, serial interface, digital I/O plus more options makes it easy to connect various indus

Alekto 2

NetModule
 NB1600-mobile

Código: NB1600-U

The NB1600 mobile router brings mobile broadband to the DIN rail or any other place where a fixed Internet connection is unavailable, unsuitable and too expensive. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway,

NB1600 UMTS/3G Router

VScom
 Baltos 1080

Código: 6832

OnRISC Baltos 1080 is a fanless industrial embedded PC for 19-inch mounting. It is based on an ARM Cortex-A8 with NEON SIMD Coprocessor, up to 1GHz CPU clock speed. See VS-SOM-AM335x for more details. Low power consumption, wide temperature range -20°C to

Baltos 1080

NetModule
 The NB1600 WIAP supports multiple wireless networks (WLAN-Hotspots) and fast Internet via 2G-3G-4G-

Código: NB1600-UW-G

The NB1600 WIAP supports multiple wireless networks and connects them to the Internet via 2G/3G or 2G/3G/4G. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway, SDK, VPNs and many more.

NB1600 Mobile & WLAN

VScom
 Baltos iR 2110

Código: 6833

OnRISC Baltos iR 2110 is a fanless industrial embedded PC in compact dimensions, designed for DIN Rail mounting. It is based on an ARM Cortex-A8 with NEON SIMD Coprocessor, up to 1GHz CPU clock speed. Low power consumption, wide temperature range -20°C to

Baltos iR 2110

IBHsoftec
 IBHLink S5++

Código: 20284

The IBH link S5++ is a cost-efficient alternative solution for conventional PLC-PC-connections via Ethernet.

IBH Link S5++

NetModule
 The NB1600 WIAP supports multiple wireless networks (WLAN-Hotspots) and fast Internet via 2G-3G-4G-

Código: NB1600-LW

The NB1600 WIAP supports multiple wireless networks and connects them to the Internet via 2G/3G or 2G/3G/4G. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway, SDK, VPNs and many more.

NB1600 Mobile & WLAN

VScom
 Baltos iR 3220

Código: 6831

OnRISC Baltos iR 3220 is a fanless industrial embedded PC in compact dimensions, designed for DIN Rail mounting. It is based on an ARM Cortex-A8 with NEON SIMD Coprocessor, up to 1GHz CPU clock speed. Low power consumption, wide temperature range -20°C to

Baltos iR 3220

IXXAT
 USB-to-CAN FD compact

Código: 1.01.0351.12001

The USB-to-CAN FD has – depending on the device variant – up to two channels, which support three switchable operation modes: ISO CAN FD, non ISO CAN FD and CAN High-Speed. The automotive variant provides also one LIN channel.

USB-to-CAN FD compact

NetModule
 The NB1600 WIAP supports multiple wireless networks (WLAN-Hotspots) and fast Internet via 2G-3G-4G-

Código: NB1600-LW-G

The NB1600 WIAP supports multiple wireless networks and connects them to the Internet via 2G/3G or 2G/3G/4G. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway, SDK, VPNs and many more.

NB1600 Mobile & WLAN

VScom
 Baltos iR 5221

Código: 6830

OnRISC Baltos iR 5221 is a fanless industrial embedded PC in compact dimensions, designed for DIN Rail mounting. It is based on an ARM Cortex-A8 with NEON SIMD Coprocessor, up to 1GHz CPU clock speed. Low power consumption, wide temperature range -20°C to

Baltos iR 5221

NetModule
 NB1600-WLAN

Código: NB1600-W

The NB1600-WLAN can be configured as WLAN access point or as wlan client. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway, SDK, VPNs and many more.

NB1600 WLAN

NetModule
 NB1600-cdma450

Código: NB1600-Ca

The NB1600 mobile router brings mobile broadband to the DIN rail or any other place where a fixed Internet connection is unavailable, unsuitable and too expensive. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway,

NB1600 CDMA Router

IXXAT
 CAN@net NT 200-420

Código: CAN@net NT 200/420

The CAN@net NT is offered in two variants, as CAN@net NT 200 with two classic CAN channels and as CAN@net NT 420 with four CAN channels, of which two channels can be switched between CAN and CAN FD.

CAN@net NT 200/420

NetModule
 NB1600-LTE450

Código: NB1600-La

The NB1600 mobile router brings mobile broadband to the DIN rail or any other place where a fixed Internet connection is unavailable, unsuitable and too expensive. In addition all NB1600 core functions are available: digital I/O, USB and serial gateway,

NB1600 LTE 450 MHz Router

IXXAT
 CANbridge NT 420

Código: 1.01.0331.42000

The CANbridge NT is offered in two versions, as CANbridge NT 200 with 2 classic CAN channels and as CANbridge NT 420 with 4 CAN channels, where 2 channels can be switched between CAN and CAN FD.

CANbridge NT420

NetModule

Código: NB2700-LLa

The NB2700 router provides Internet access using standard GSM, UMTS and LTE as well LTE 450MHz as wireless Internet connection. Two mobile broadband links can be used for load balancing and seamless switch-over using the Mobile IP protocol.

NB2700 Dual-LTE

Anybus
 CANopen Master Simulator

Código: 019920

The automatic Slave identification functionality permits communication to almost any CANopen slave device even if the normally required EDS file is not available.

CANopen Master Simulator

NetModule
 NB1600 Wireline

Código: NB1600-R

The NB1600 Wireline is the best choice for LAN-LAN communication and acts as device server, industrial firewall, VPN-router, protocol converter, I/O-module or simple IPC. For small and medium projects use this product on the central side as a VPN server

NB1600 Wireline

VScom
 NetCom Plus 111

Código: 6640

The NetCom+ 111 is an industrial-strength network-based serial device servers for connecting one RS232 device like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtual

NetCom Plus 111

Anybus
 DeviceNet Master Simulator

Código: 018410

Any DeviceNet Slave can be set into operation and afterwards clear and user friendly dialog boxes are used to exchange cyclic I/O data or acyclic explicit messages between the DeviceNet Slave and the Simulator.

DeviceNet Master Simulator

NetModule
 NB2800 MediaVehicle

Código: NB2800-R

The NB2800 MediaVehicle provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable Entertainment and WiFi for passengers.

NB2800 MediaVehicle

VScom
 NetCom Plus 113

Código: 6645

The NetCom+ 113 is an industrial-strength network-based serial device servers for connecting one RS232 device (or RS485 communication line) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows ope

NetCom Plus 113

Anybus
 PROFIBUS Master Simulator

Código: 017504

Test your device without an expensive PLC Master simulators are ideal for test-wiring of inputs and ouputs and reading and writing analog values.

PROFIBUS Master Simulator

NetModule
 NB2800 MediaVehicle

Código: NB2800-Wac

The NB2800 MediaVehicle provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable Entertainment and WiFi for passengers.

NB2800 MediaVehicle

VScom
 NetCom Plus 123 WLAN

Código: 6646

The NetCom+ 123 WLAN is an industrial-strength network-based serial device servers for connecting one RS232 device (or RS485 communication line) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Window

NetCom Plus 123 WLAN

Anybus
 PROFINET Master Simulator

Código: 024710

The PROFINET Master Simulator is an easy to use software for data exchange with PROFINET Slaves of many suppliers. Software only.

PROFINET Master Simulator

NetModule
 NB2800 MediaVehicle

Código: NB2800-LWac-G

The NB2800 MediaVehicle provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable Entertainment and WiFi for passengers.

NB2800 MediaVehicle

VScom
 NetCom Plus 211

Código: 6650

The NetCom+ 211 is an industrial-strength network-based serial device servers for connecting two RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtua

NetCom Plus 211

NetModule
 NB2800 MediaVehicle

Código: NB2800-2LWac-G

The NB2800 MediaVehicle provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable Entertainment and WiFi for passengers.

NB2800 MediaVehicle

VScom
 NetCom Plus 213

Código: 6655

The NetCom+ 213 is an industrial-strength network-based serial device servers for connecting two RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows o

NetCom Plus 213

Anybus
 EtherNet/IP to Modbus-TCP Linking Device

Código: HMS-EN2MB-R

The Linking Device primary function is with the fast transfer of large I/O data between the two networks. This offloads your Logix PLC from working with additional calculations.

EtherNet/IP to Modbus-TCP Linking Device

NetModule
 NB2800 MediaVehicle

Código: NB2800-2LWacGe

The NB2800 MediaVehicle provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable Entertainment and WiFi for passengers.

NB2800 MediaVehicle

VScom
 Model NetCom Plus 411 with WLAN

Código: 6670

The NetCom+ 411 is an industrial-strength network-based serial device servers for connecting four RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtu

NetCom Plus 411

Anybus
 EtherNet/IP to Serial Linking Device

Código: HMS-EN2SE-R

The Linking Device performs an intelligent protocol conversion and presents the serial data to the Logix PLC as easily processed I/O data.

EtherNet/IP to Serial Linking Device

NetModule
 NB2800 MediaVehicle

Código: NB2800-2LWacDf-G

The NB2800 MediaVehicle provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable Entertainment and WiFi for passengers.

NB2800 MediaVehicle

VScom
 Model NetCom Plus 411 with WLAN

Código: 6675

The NetCom+ 413 is an industrial-strength network-based serial device servers for connecting four RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows

NetCom Plus 413

NetModule
 NB2710

Código: NB2710-LWA-GV

The NB2710 MultiVehicle provides wireless Internet access over multiple LTE and WiFi connections for data-intensive applications like passenger WiFi and information or condition monitoring. Numerous additional communication interfaces guarantee an excelle

NB2710 MultiVehicle

VScom
 Model NetCom Plus 411 with WLAN

Código: 6671

The NetCom+ 411 is an industrial-strength network-based serial device servers for connecting four RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtu

NetCom Plus 411 POE

NetModule
 NB2710

Código: NB2710-LWC-G

The NB2710 MultiVehicle provides wireless Internet access over multiple LTE and WiFi connections for data-intensive applications like passenger WiFi and information or condition monitoring. Numerous additional communication interfaces guarantee an excelle

NB2710 MultiVehicle

VScom
 Model NetCom Plus 411 with WLAN

Código: 6676

The NetCom+ 413 is an industrial-strength network-based serial device servers for connecting four RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows

NetCom Plus 413 POE

NetModule
 NB2710

Código: NB2710-LWI-G

The NB2710 MultiVehicle provides wireless Internet access over multiple LTE and WiFi connections for data-intensive applications like passenger WiFi and information or condition monitoring. Numerous additional communication interfaces guarantee an excelle

NB2710 MultiVehicle

VScom
 NetCom Plus 811

Código: 6680

The NetCom+ 811 is an industrial-strength network-based serial device servers for connecting eight RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virt

NetCom Plus 811

NetModule
 NB2710

Código: NB2710-2LW-G

The NB2710 MultiVehicle provides wireless Internet access over multiple LTE and WiFi connections for data-intensive applications like passenger WiFi and information or condition monitoring. Numerous additional communication interfaces guarantee an excelle

NB2710 MultiVehicle

VScom
 NetCom Plus 813

Código: 6685

The NetCom+ 813 is an industrial-strength network-based serial device servers for connecting eight RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows

NetCom Plus 813

NetModule

Código: NB2700-U

The NB2700 CompactVehicle provides wireless Internet access over 3G/4G on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB2700 CompactVehicle

VScom
 NetCom Plus 811 POE

Código: 6681

The NetCom+ 811 is an industrial-strength network-based serial device servers for connecting eight RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virt

NetCom Plus 811 POE

NetModule

Código: NB2700-U-G

The NB2700 CompactVehicle provides wireless Internet access over 3G/4G on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB2700 CompactVehicle

VScom
 NetCom Plus 813 POE

Código: 6686

The NetCom+ 813 is an industrial-strength network-based serial device servers for connecting eight RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows

NetCom Plus 813 POE

NetModule

Código: NB2700-UW-G

The NB2700 CompactVehicle provides wireless Internet access over 3G/4G on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB2700 CompactVehicle

VScom
 Model NetCom Plus 811 DIO with WLAN

Código: 6683

The NetCom+ 811 DIO is an industrial-strength network-based serial device servers for connecting eight RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs

NetCom Plus 811 DIO

NetModule

Código: Nb2700-L-G

The NB2700 CompactVehicle provides wireless Internet access over 3G/4G on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB2700 CompactVehicle

VScom
 NetCom Plus 1613 Left Part=NetCom Plus 813

Código: 6694

The NetCom+ 1613 actually is a combination of NetCom Plus 813 with USB-8COM Plus, mounted as a pair via a special Rack Mount kit. The NetCom Plus integrates the serial ports from the USB-8COM Plus into the services for the internal port. Both devices are

NetCom Plus 1613

NetModule

Código: NB2700-LW-G

The NB2700 CompactVehicle provides wireless Internet access over 3G/4G on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB2700 CompactVehicle

VScom
 Front and Back

Código: 664

NetCom 111 is an industrial-strength network-based serial device server for connecting one RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing serial dev

NetCom 111

NetModule
 NB3800 MediaRail

Código: NB3800-2LWac-G

The NB3800 MediaRail provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable data-intensive applications like entertainment and WiFi for passengers.

NB3800 MediaRail

VScom
 NetCom 113

Código: 666

NetCom 113 is an industrial-strength network-based serial device server for connecting one RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing se

NetCom 113

NetModule
 NB3800 MediaRail

Código: NB3800-2L2Wac-G

The NB3800 MediaRail provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable data-intensive applications like entertainment and WiFi for passengers.

NB3800 MediaRail

VScom
 NetCom 211 PoE

Código: 6667

NetCom 211 PoE is an industrial-strength network-based serial device server for connecting two RS232 devices like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP. On NetCom 211 PoE the featur

NetCom 211 PoE

NetModule
 NB3800 MediaRail

Código: NB3800-2LWacDf-G

The NB3800 MediaRail provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable data-intensive applications like entertainment and WiFi for passengers.

NB3800 MediaRail

VScom
 NetCom 211

Código: 667

NetCom 211 is an industrial-strength network-based serial device server for connecting two RS232 devices like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing serial de

NetCom 211

NetModule
 NB3800 MediaRail

Código: NB3800-3LWac-G

The NB3800 MediaRail provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable data-intensive applications like entertainment and WiFi for passengers.

NB3800 MediaRail

VScom
 NetCom 411

Código: 668

NetCom 411 is an industrial-strength network-based serial device server for connecting four RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing serial de

NetCom 411

NetModule
 NB3800 MediaRail

Código: NB3800-4L-G

The NB3800 MediaRail provides wireless Internet access over LTE and media server capabilities. The integrated storage up to 1 TB and fastest WiFi access points enable data-intensive applications like entertainment and WiFi for passengers.

NB3800 MediaRail

VScom
 NetCom 413

Código: 669

NetCom 413 is an industrial-strength network-based serial device server for connecting four RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing s

NetCom 413

NetModule
 NB3711 High-Performance Platform

Código: NB3711-LWacA-GV

The NB3711 MultiRail+ with enhanced performance wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3711 MultiRail+

VScom
 NetCom 811

Código: 670

NetCom 811 is an industrial-strength network-based serial device server for connecting eight RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing serial d

NetCom 811

NetModule
 NB3711 High-Performance Platform

Código: NB3711-LWacC-G

The NB3711 MultiRail+ with enhanced performance wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3711 MultiRail+

VScom
 NetCom 813

Código: 671

NetCom 813 is an industrial-strength network-based serial device server for connecting eight RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing

NetCom 813

NetModule
 NB3711 High-Performance Platform

Código: NB3711-LWacDa-G

The NB3711 MultiRail+ with enhanced performance wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3711 MultiRail+

NetModule
 NB3711 High-Performance Platform

Código: NB3711-2LWac-G

The NB3711 MultiRail+ with enhanced performance wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3711 MultiRail+

VScom
 USB-COM Plus Mini

Código: 655

The modern USB-COM Plus Mini adapter connects one RS232 or RS422/485 device to your PC by a USB 2.0 Full Speed port.

USB-COM Plus Mini

NetModule
 NB3711 High-Performance Platform

Código: NB3711-2LWacPb-G

The NB3711 MultiRail+ with enhanced performance wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3711 MultiRail+

VScom
 USB-COM Plus Mini ISO

Código: 656

The modern USB-COM Plus Mini ISO adapter connects one RS232 or RS422/485 device to your PC by a USB 2.0 Full Speed port.

USB-COM Plus Mini ISO

NetModule
 NB3710 multiple LTE-UMTS + WLAN router for railway applications

Código: NB3710-LWA-GV

The NB3710 MultiRail enables wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3710 MultiRail

VScom
 USB-COM Plus

Código: 601

The modern USB-COM Plus adapter connects one RS232 or RS422/485 device to your PC by a USB 2.0 Full Speed port

USB-COM Plus

NetModule
 NB3710 multiple LTE-UMTS + WLAN router for railway applications

Código: NB3710-LWC-G

The NB3710 MultiRail enables wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3710 MultiRail

VScom
 USB-COM Plus ISO

Código: 603

The modern USB-COM Plus ISO adapter connects one RS232 or RS422/485 device to your PC by a USB 2.0 Full Speed port.

USB-COM Plus ISO

NetModule
 NB3710 multiple LTE-UMTS + WLAN router for railway applications

Código: NB3710-LWI-G

The NB3710 MultiRail enables wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3710 MultiRail

NetModule
 NB3710 multiple LTE-UMTS + WLAN router for railway applications

Código: NB3710-2LW-G

The NB3710 MultiRail enables wireless Internet access for applications like passenger WiFi & information and condition monitoring. Numerous additional communication interfaces guarantee an excellent interaction with onboard electronics.

NB3710 MultiRail

NetModule
 NB3711 communication platform

Código: NB3701-UWac-G

The NB3701 CompactRail+ with enhanced performance provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3701 CompactRail+

NetModule
 NB3711 communication platform

Código: NB3701-L-G

The NB3701 CompactRail+ with enhanced performance provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3701 CompactRail+

NetModule
 NB3711 communication platform

Código: NB3701-LWac-G

The NB3701 CompactRail+ with enhanced performance provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3701 CompactRail+

NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-U

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3700 CompactRail

NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-U-G

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3700 CompactRail

NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-UW-G

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3700 CompactRail

NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-L-G

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3700 CompactRail

NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-LW-G

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3700 CompactRail

NetModule
 NB3700 LTE-UMTS + WLAN Router for railway applications

Código: NB3700-LWPb-G

The NB3700 CompactRail provides wireless Internet access on board. The compact device integrates a WiFi access point and further interfaces for various application like remote access, data acquisition and passenger information.

NB3700 CompactRail

NetModule
 NB1600 Concentrator

Código: NB1600-R-S

For small projects use this product on the central side as a VPN server.

NB1600 Concentrator

Acksys
 COMETH RS232 compact single port server

Código: COMETH

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, making it possible to communicate between two distant serial equipments through the network or even build an Ethernet

COMETH

Acksys
 RailTrack

Código: RailTrack/RRRXB

RailTrack is a ruggedized WiFi access point specially designed for railway and certified for trackside and tunnel infrastructures.It can be connected to the ground network through either Gbps fiber optic or copper connections.

RailTrack

Acksys
 WLn-xROAD

Código: WLn-xROAD

WLn-xROAD/N is a rugged equipment designed for applications in road transportation, depots, warehouses, agriculture, manufacturing floors, docks, distribution centers, shipyards and lumberyards … it can be mounted in trucks, city buses, forklifts, trailer

WLn-xROAD

Acksys
 WLg-ACCESS-ATEX

Código: WLg-ACCESS-ATEX-DC [H4]

WLg-ACCESS-ATEX is designed for industrial applications in explosive environment like chemical industries, refineries, electric stations, very dusty environments and also those where sparks and electric arcs occur...

WLg-ACCESS-ATEX

Acksys
 WaveNet-Ex

Código: WaveNet-Ex

WaveNet-Ex is designed for industrial applications in explosive environment like chemical industries, refineries, electric stations, very dusty environments as well as those where sparks and electric arcs occur.

WaveNet-Ex

Acksys
 WLg-SWITCH 3-in-1 combo- Rugged 8-port Ethernet switch, POE injector, WiFi AP - BRIDGE - REPEATER

Código: WLg-SWITCH

WLg-SWITCH is a 3-in-1 combo solution: 8-port managed Ethernet switch, 2.4 / 5 GHz WiFi ACCESS POINT / BRIDGE / REPEATER and 120W power injector (PoE PSE) designed for harsh industrial environments and automotive applications. The unit is housed in a comp

WLg-SWITCH

Acksys
 WLg-IDA-N WiFi access point, 2-port Ethernet bridge & WDS repeater

Código: WLg-IDA/N

WLg-IDA/N features a WLAN interface coupled to a 2-port Ethernet 10/100 designed for harsh industrial environments and automotive applications. The unit is housed in a compact enclosure ready to be DIN rail or panel mounted.

WLg-IDA/N

Acksys
 WLg-IDA-S Wireless RS232 - RS422 - RS485 serial device server

Código: WLg-IDA/S

WLg-IDA/S gives access to any serial equipments from Windows, UNIX & Linux computers connected to your WiFi Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network, or directly with a peer to peer

WLg-IDA/S

Acksys
 WLn-LINK-OEM

Código: WLn-LINK-OEM-RJ/R

WLn-LINK-OEM embedded module is a 2.4 / 5 GHz IEEE 802.1a/b/g/n solution designed to quickly and easily add wireless LAN to a wide range of wired Ethernet OEM products.

WLn-LINK-OEM

Frontline
 Comprobe Sodera

Código: ComProbe Sodera

Broaden Your View - See it all! With the Frontline Sodera Wideband Bluetooth Protocol Analyzer you see all Bluetooth traffic on all channels - everything that is in the air! View inquiry and paging packets along with Bluetooth all low energy and all BR/ED

ComProbe Sodera

EKS Engel
 rack 19 EKS-Engel

Código: RACK 19

Rack 19‘‘ can be used for the mounting of a DIN rail in a horizontal or vertical way.

RACK 19

EKS Engel
 EKS-IRP EKS-Engel

Código: EKS-IRP

EKS-IRP power supplies have got a wide input voltage range of 85 - 264 VAC and a stable output voltage of 24 VDC

EKS-IRP

EKS Engel
 IV(ZN)H1

Código: IV(ZN)H1

The cables can be used as patch cable, pigtails or for the connection of buildings.

IV(ZN)H1

EKS Engel
 IV(ZN)H2 EKS-Engel

Código: IV(ZN)H2

The cables can be used as patch cable, pigtails or for the connection of buildings

IV(ZN)H2

EKS Engel
 IV(ZN)HH2

Código: IV(ZN)HH2

The cables can be used as patch cable, pigtails or for the connection of buildings

IV(ZN)HH2

EKS Engel
 IV(ZN)HH[N]

Código: IV(ZN)HH[N]

The cables can be used as patch cable, pigtails or for the connection of buildings.

IV(ZN)HH[N]

busqueda.noticias CAN: 62

 EtherNet/IP™ Linking Devices de Anybus permite conectar dispositivos Profibus, Modbus TCP o RS232/422/485 directamente a los autómatas ControlLogix o CompactLogix de Rockwell.

EtherNet/IP™ Linking Devices de Anybus permite conectar dispositivos Profibus, Modbus TCP o RS232/422/485 directamente a los autómatas ControlLogix o CompactLogix de Rockwell.

Pasarelas Stand-alone, compatibles con EtherNet/IP™ e integrables en Estudio 5000® La nueva familia de pasarelas para Ethernet/IP de HMS, los Linking Devices, te permiten conectar tus dispositivos o sistemas en Profibus, Modbus TCP o serie a tu ambiente

EtherNet/IP™ Linking Devices de Anybus permite conectar dispositivos Profibus, Modbus TCP o RS232/422/485 directamente a los autómatas ControlLogix o CompactLogix de Rockwell.

 Módulos de comunicación molex para PLCs Rockwell Automation

Módulos de comunicación molex para PLCs Rockwell Automation

Molex es uno de los líderes en conectividad para los controladores de Rockwell Automation, con sus módulos de comunicación PAC/PLC, son una solución perfecta para una amplia gama de aplicaciones incluyendo la automatización industrial, control de proceso

Módulos de comunicación molex para PLCs Rockwell Automation

 Nueva Familia PC Industrial para carril DIN: OnRisc Baltos, muy Versátil y con muchos Puertos de Comunicación, CPU RISC ARM Cortex-A8 600 a MHz

Nueva Familia PC Industrial para carril DIN: OnRisc Baltos, muy Versátil y con muchos Puertos de Comunicación, CPU RISC ARM Cortex-A8 600 a MHz

OnRISC Baltos es una nueva familia de Box PC Linux, basado en state-of-the-art SoC. De dimensiones compactas, con varias interfaces de comunicación, bajo consumo de energía y un amplio rango de temperaturas, hacen que sea el sistema ideal para las tareas

Nueva Familia PC Industrial para carril DIN: OnRisc Baltos, muy Versátil y con muchos Puertos de Comunicación, CPU RISC ARM Cortex-A8 600 a MHz

 Cables y Comunicación por Fibra Óptica, solo Ventajas: Alta Velocidad de Comunicación, Ofrece aislamiento Galvánico, Inmunidad al ruido eléctrico. Evite el uso del precioso Cable de Cobre…

Cables y Comunicación por Fibra Óptica, solo Ventajas: Alta Velocidad de Comunicación, Ofrece aislamiento Galvánico, Inmunidad al ruido eléctrico. Evite el uso del precioso Cable de Cobre…

EKS Engel: Fabricante especializado en todo tipo de Comunicación por Fibra Óptica. Transmisión segura de datos en largas distancias incluso en situaciones extremas. 1 Los dispositivos de comunicación EKS Engel son elementos fiables y comprobados en camp

Cables y Comunicación por Fibra Óptica, solo Ventajas: Alta Velocidad de Comunicación, Ofrece aislamiento Galvánico, Inmunidad al ruido eléctrico. Evite el uso del precioso Cable de Cobre…

 Mañana Matelec 2014: Instalacion Internet Robusto para Trenes, Buses e Industria… Routers de NetModule + Antenas Antonics…

Mañana Matelec 2014: Instalacion Internet Robusto para Trenes, Buses e Industria… Routers de NetModule + Antenas Antonics…

Una sola antena para todas las comunicaciones de Trenes y Buses: Las antenas planas de Antonics-ICP GmbH están centradas en el mercado de aplicaciones móviles profesionales como innovaciones estables, las cuales han sido diseñadas con los clientes y despu

Mañana Matelec 2014: Instalacion Internet Robusto para Trenes, Buses e Industria… Routers de NetModule + Antenas Antonics…

 Anybus CompactCom: "Fieldbus plug-in modules" para poner Bus de Campo

Anybus CompactCom: "Fieldbus plug-in modules" para poner Bus de Campo

Anybus® CompactCom Es una familia de interfaces intercambiables de comunicación (plug-in), certificados y comprobados, diseñados para integrarse en equipos de automatización industrial. Incorporan la funcionalidad completa de un interfaz de red industrial

Anybus CompactCom: "Fieldbus plug-in modules" para poner Bus de Campo

 Conectando Redes Industriales y Automatas PLC

Conectando Redes Industriales y Automatas PLC

Con más de 300 variantes, la familia de pasarelas Anybus-X , conecta casi cualquier combinación posible de dos Buses de Campo o redes Ethernet Industrial.

Conectando Redes Industriales y Automatas PLC

 Tarjeta PROFIBUS DP Master/Slave para PLC Controllogix de Rockwell Automation

Tarjeta PROFIBUS DP Master/Slave para PLC Controllogix de Rockwell Automation

Tarjeta PROFIBUS DP Master / Slave para: PLC Controllogix de Rockwell Automation También hay tarjetas para PLC SLC 500 de Rockwell Automation También hay tarjetas para otros Buses de Campo como: Modbus, AS-I, Interbus, Ethernet Industrial y Serie RS232 /

Tarjeta PROFIBUS DP Master/Slave para PLC Controllogix de Rockwell Automation

 Conferencias Web sobre Comunicaciones Industriales

Conferencias Web sobre Comunicaciones Industriales

Webinarios GRATUITOS sobre comunicaciones industriales en los que se abordarán diferentes problemáticas comunes y cómo eWON le ayuda a solventarlas. Dirigido a Fabricantes de maquinaria, integradores de Sistemas y Usuarios

Conferencias Web sobre Comunicaciones Industriales

 Anybus Wireless Bolt - Oferta de lanzamiento

Anybus Wireless Bolt - Oferta de lanzamiento

1 Kit de inicio (Compuesto x 2 Wireless Bolt)!! El Anybus® Wireless Bolt da acceso inalámbrico a máquinas y armarios a través de Bluetooth® o Wireless LAN (WLAN).

Anybus Wireless Bolt - Oferta de lanzamiento

 Rescate de sistemas con Siemens Simatic S5

Rescate de sistemas con Siemens Simatic S5

La tarjeta ABC_X-CPU-2_e57 ofrece las siguientes ventajas: -Construcción Robusta, Facil de sustituir, extiende la vida del hardware Simatic S5

Rescate de sistemas con Siemens Simatic S5

 Anybus Wireless Bridge II, 2da Generacion, Mejor y mas Potente...

Anybus Wireless Bridge II, 2da Generacion, Mejor y mas Potente...

Ahora con hasta 400 metros de alcance!
Radio Todo en uno: Bluetooth y Wlan en el mismo dispositivo…
100% compatible con la versión I, tiene todas las mismas medidas, la misma posición de los conectores y ahora con todos los LEDs visibles en el

Anybus Wireless Bridge II, 2da Generacion, Mejor y mas Potente...

 eWON Cosy 131 - Acceso Remoto a cualquier Instalación en el Mundo

eWON Cosy 131 - Acceso Remoto a cualquier Instalación en el Mundo

El eWON Cosy es un router industrial VPN que permite acceder a máquinas e instalaciones a través de Internet. Con el eWON Cosy, los fabricantes OEM y los integradores de sistemas pueden intervenir en las máquinas o instalaciones en cualquier lugar del mun

eWON Cosy 131 - Acceso Remoto a cualquier Instalación en el Mundo

busqueda.casos CAN: 2

Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X
Type P-ST H-ST MM-ST MM-SC