ER-Soft dispone de una amplia gama de pasarelas de comunicación industrial para la mayoría de buses de campo.
ER-Soft

ER-Soft dispone de una amplia gama de pasarelas de comunicación industrial para la mayoría de buses de campo.


ER-Soft dispone de una amplia gama de pasarelas de comunicación industrial para la mayoría de buses de campo. +AS-i interface Maestro +BACNet MS/TP +BACNet/IP +Bluetooth +CANopen +CANOpen Maestro +CANOpen esclavo +CC-Link esclavo +CC-Link IE Field esclavo +Common Ethernet +CompoNet +Controlnet adaptador/esclavo +Dali +Devicenet adaptador/esclavo +DNP3 +Devicenet Maestro +EtherCAT esclavo +Ethernet IP adaptador/esclavo +Ethernet IP Maestro +M12 for IP65/67 devices +Fieldbus Foundation +FIP esclavo +Hart +Interbus CU esclavo +Interbus FO esclavo +IEC-61850 +IEC-60870-5-104 +J1939 +KNX +Lonworks +M-Bus +Modbus Plus esclavo +Modbus RTU Maestro +Modbus RTU esclavo +Modbus TCP Maestro +Modbus TCP esclavo +PowerLink +MPI +PPI +Profibus Maestro +Profibus esclavo +Profibus PA +Profinet IO Device +Profinet IRT Device +Profinet IRT fibra optica device +RS232 +RS485 +Sercos III +USB +IEC60870-5-101 Maestro & esclavo +IEC60870-5-103 Maestro +IEC60870-5-104 Servidor & Cliente - KEMA certified +IEC61400-25 +COMLI Maestro +DLMS/IEC1107 +DF1 +SNMP +RS422 +CAN +CAN FD +LIN +ASCII +Spinel +Modbus ASCII +.NET Framework +FIPIO esclavo +USS Master +Digital-inputs +Digital-output


Anybus
 abc-canopen

Código: AB7315

Integrate your CAN-based industrial devices and equipment to a CANopen control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a CANopen interface
  • Allows system integrators to retro-fit older CAN-based automation devices into CANopen control communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with CANopen support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network  
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - CANopen

Anybus
 Anybus Communicator CC-Link

Código: AB7321

Integrate your CAN-based industrial devices and equipment to a CC-Link control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a CC-Link interface
  • Allows system integrators to retro-fit older CAN-based automation devices into CC-Link communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with CC-Link support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network  
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - CC-Link

Anybus
 Anybus Communicator ControlNet

Código: AB7314

Integrate your CAN-based industrial devices and equipment to a ControlNet control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a ControlNet interface
  • Allows system integrators to retro-fit older CAN-based automation devices into ControlNet communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with ControlNet support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network  
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - ControlNet

Anybus
 Anybus Communicator DeviceNet

Código: AB7313

Integrate your CAN-based industrial devices and equipment to a DeviceNet control system without the need for any changes to your device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a DeviceNet interface
  • Allows system integrators to retro-fit older CAN-based automation devices into DeviceNet communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all leading PLC's with DeviceNet support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network  
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - DeviceNet

Anybus
 Anybus Communicator EtherCAT

Código: AB7311

Integrate your CAN-based industrial devices and equipment to a EtherCAT control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating an EtherCAT interface
  • Allows system integrators to retro-fit older CAN-based automation devices into modern EtherCAT communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLC's with EtherCAT support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network  
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - EtherCAT

Anybus
 Anybus Communicator EtherNet-IP

Código: AB7318

Integrate your CAN-based industrial devices and equipment to a EtherNet/IP control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a CAN interface
  • Allows system integrators to retro-fit older CAN-based automation devices into modern EtherNet/IP communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with EtherNet/IP support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network
  • Integrated Email client, FTP server and embedded webserver for diagnostics and data visualization
  • Additional support for Modbus TCP Class 0, 1 and partial Class 2 
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - EtherNet/IP

Anybus
 Anybus Communicator Modbus RTU

Código: AB7316

Integrate your CAN-based industrial devices and equipment to a Modbus RTU control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a Modbus RTU interface
  • Allows system integrators to retro-fit older CAN-based automation devices into Modbus RTU communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with Modbus RTU support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network  
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - Modbus RTU

Anybus
 Anybus Communicator Modbus TCP

Código: AB7319

Integrate your CAN-based industrial devices and equipment to a Modbus TCP control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a CAN interface
  • Allows system integrators to retro-fit older CAN-based automation devices into modern Modbus TCP communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with leading PLCs with Modbus TCP support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network
  • Integrated Email client, FTP server and embedded webserver for diagnostics and data visualization
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - Modbus TCP

Anybus
 Anybus Communicator Profibus

Código: AB7312

Integrate your CAN-based industrial devices and equipment to a PROFIBUS control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a PROFIBUS interface
  • Allows system integrators to retro-fit older CAN-based automation devices into PROFIBUS communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with PROFIBUS support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network  
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - PROFIBUS

Anybus
 Anybus Communicator PROFINET

Código: AB7317

Integrate your CAN-based industrial devices and equipment to a PROFINET control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a CAN interface
  • Allows system integrators to retro-fit older CAN-based automation devices into modern PROFINET communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with PROFINET support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network
  • Integrated Email client, FTP server and embedded webserver for diagnostics and data visualization
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - PROFINET

Anybus
 Anybus Communicator CAN - PROFINET-IRT

Código: AB7320

Integrate your CAN-based industrial devices and equipment to a PROFINET-IRT control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a CAN interface
  • Allows system integrators to retro-fit older CAN-based automation devices into modern real-time PROFINET-IRT communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with PROFINET-IRT support
  • Performs complete CAN protocol conversion, no PLC function blocks required
  • Flexible CAN frame building method for both Response/Request or Produce/Consume protocols
  • Intelligent I/O data mapping within the Communicator permits even devices with slow CAN communication can be integrated without any restrictions to the upper network
  • Integrated Email client, FTP server and embedded webserver for diagnostics and data visualization
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"
Weight 150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC
Current consumption Typical 150mA
Configuration portUSB (USB cable included)
CAN connector  D-sub 9 Male (Included)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CAN baudrate20 kbit/s - 1 Mbit/s
Protocol support CAN 2.0A and 2.0B (11 and 29 bit identifiers)
Certifications CE, CULUS, ATEX/Haz.Loc

Anybus Communicator CAN - PROFINET-IRT

Anybus
 X-gateway CANopen Master - CANopen Slave

Código: AB7304

The Anybus X-gateway CANopen provide a seamless connection between a CANopen upper network and a secondary CANopen sub-network. This makes it possible to extend CANopen network and devices without a secondary PLC system.
  • Fast copying of cyclic I/O data between two CANopen networks (5 ms)
  • Full CANopen Master/Manager functionality, eliminates the need for an additional PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway - CANopen Master - CANopen Slave

Anybus
 X-gateway CANopen Master - ControlNet Adapter

Código: AB7303

The Anybus X-gateway CANopen provides a seamless connection between a ControlNet network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a ControlNet PLC system.
  • Fast copying of cyclic I/O data between a CANopen and ControlNet network (5 ms)
  • Fulll CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – ControlNet Adapter

Anybus
 X-gateway CANopen Master - DeviceNet Adapter

Código: AB7302

The Anybus X-gateway CANopen provides a seamless connection between a DeviceNet network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a DeviceNet PLC system.
  • Fast copying of cyclic I/O data between CANopen and DeviceNet network (5 ms)
  • Fulll CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – DeviceNet Adapter

Anybus
 X-gateway CANopen Master - EtherCAT Slave

Código: AB7300

The Anybus X-gateway CANopen provides a seamless connection between a EtherCAT network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a EtherCAT PLC system.
  • Fast copying of cyclic I/O data between a CANopen and EtherCAT network (5 ms)
  • Fulll CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – EtherCAT Slave

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X