ER-Soft dispone de una amplia gama de pasarelas de comunicación industrial para la mayoría de buses de campo.
ER-Soft

ER-Soft dispone de una amplia gama de pasarelas de comunicación industrial para la mayoría de buses de campo.


ER-Soft dispone de una amplia gama de pasarelas de comunicación industrial para la mayoría de buses de campo. +AS-i interface Maestro +BACNet MS/TP +BACNet/IP +Bluetooth +CANopen +CANOpen Maestro +CANOpen esclavo +CC-Link esclavo +CC-Link IE Field esclavo +Common Ethernet +CompoNet +Controlnet adaptador/esclavo +Dali +Devicenet adaptador/esclavo +DNP3 +Devicenet Maestro +EtherCAT esclavo +Ethernet IP adaptador/esclavo +Ethernet IP Maestro +M12 for IP65/67 devices +Fieldbus Foundation +FIP esclavo +Hart +Interbus CU esclavo +Interbus FO esclavo +IEC-61850 +IEC-60870-5-104 +J1939 +KNX +Lonworks +M-Bus +Modbus Plus esclavo +Modbus RTU Maestro +Modbus RTU esclavo +Modbus TCP Maestro +Modbus TCP esclavo +PowerLink +MPI +PPI +Profibus Maestro +Profibus esclavo +Profibus PA +Profinet IO Device +Profinet IRT Device +Profinet IRT fibra optica device +RS232 +RS485 +Sercos III +USB +IEC60870-5-101 Maestro & esclavo +IEC60870-5-103 Maestro +IEC60870-5-104 Servidor & Cliente - KEMA certified +IEC61400-25 +COMLI Maestro +DLMS/IEC1107 +DF1 +SNMP +RS422 +CAN +CAN FD +LIN +ASCII +Spinel +Modbus ASCII +.NET Framework +FIPIO esclavo +USS Master +Digital-inputs +Digital-output


Anybus
 X-gateway CANopen Master - EtherNet-IP Adapter

Código: AB7306

The Anybus X-gateway CANopen provides a seamless connection between a EtherNet/IP network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a EtherNet/IP PLC system.
  • Fast copying of cyclic I/O data between a CANopen and EtherNet/IP network (5 ms)
  • Full CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – EtherNet/IP Adapter

Anybus
 X-gateway CANopen Master - Modbus RTU Slave

Código: AB7305

The Anybus X-gateway CANopen provides a seamless connection between a Modbus RTU network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a Modbus RTU PLC system.
  • Fast copying of cyclic I/O data between a CANopen and Modbus RTU network (5 ms)
  • Fulll CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – Modbus RTU Slave

Anybus
 X-gateway CANopen Master - Modbus TCP Server

Código: AB7308

The Anybus X-gateway CANopen provides a seamless connection between a Modbus TCP network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a Modbus TCP PLC system.
  • Fast copying of cyclic I/O data between a CANopen and Modbus TCP network (5 ms)
  • Full CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – Modbus TCP Server

Anybus
 X-gateway CANopen Master - PROFIBUS Slave

Código: AB7301

The Anybus X-gateway CANopen provides a seamless connection between a PROFIBUS network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a PROFIBUS PLC system.
  • Fast copying of cyclic I/O data between a CANopen and PROFIBUS network (5 ms)
  • Fulll CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – PROFIBUS Slave

Anybus
 X-gateway CANopen Master - PROFINET Slave

Código: AB7307

The Anybus X-gateway CANopen provides a seamless connection between a PROFINET network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a PROFINET PLC system.
  • Fast copying of cyclic I/O data between a CANopen and PROFINET network (5 ms)
  • Full CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – PROFINET-IO Device

Anybus
 X-gateway CANopen Master - PROFINET-IRT Slave

Código: AB7309

The Anybus X-gateway CANopen provides a seamless connection between a PROFINET-IRT network and a secondary CANopen sub-network. This makes it possible to integrate CANopen devices into a PROFINET-IRT PLC system.
  • Fast copying of cyclic I/O data between a CANopen and PROFINET-IRT network (5 ms)
  • Full CANopen Master/Manager functionality, eliminates the need for an PLC controller on the CANopen network
  • Connects up to 126 CANopen slave devices
  • Proven and tested with all PLC manufacturers
  • Easy CANopen configuration via the included Anybus Configuration Manager software. No programming required
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                                                   
Weight150g or 0,33 lbs
Operating temperature-25 to +55 °C  or  0 to +131 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
Configuration portUSB (USB to CAN cable not included)
Configuration Switches                    On-board for CANopen node address and baud rate setting
CANopen connectorD-sub 9 Male (Included)
Fieldbus/Ethernet connector(See interface details above)
Galvanic isolation On both CAN and BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
CANopen baudrate20 kbit/s - 1 Mbit/s
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway – CANopen Master – PROFINET-IRT Device

Anybus
 x-gateway-cops-pirtfo

Código: AB7943

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and PROFINET Fiber Optic networks.
  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - CANopen Slave - PROFINET-IRT FO Device

Anybus
 x-gateway-cops-pirts

Código: AB7915

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and PROFINET-IRT networks.
  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - CANopen Slave - PROFINET-IRT Device

Anybus
 x-gateway-cops-pnts

Código: AB7658

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and PROFINET-IO networks.
  • Fast copying of cyclic I/O data between CANopen and PROFINET-IO networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway – CANopen Slave - PROFINET-IO Device

Anybus
 x-gateway-cops-pdps

Código: AB7849

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between PROFIBUS and CANopen networks.
  • Fast copying of cyclic I/O data between PROFIBUS and CANopen (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway – PROFIBUS Slave - CANopen Slave

Anybus
 x-gateway-cops-pdpm

Código: AB7807

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between PROFIBUS and CANopen networks.
  • Fast copying of cyclic I/O data between PROFIBUS and CANopen networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for PROFIBUS eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway – PROFIBUS Master - CANopen Slave

Anybus
 Anybus X-gateway CANopen Slave - Modbus TCP Server

Código: AB7640

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and Modbus TCP networks.
  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - CANopen Slave - Modbus TCP Server

Anybus
 X-gateway-mtcpm-cops

Código: AB9004

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Modbus TCP and CANopen networks.
  • Fast copying of cyclic I/O data between a Modbus TCP and a CANopen network (5 ms)
  • Allows for the integration of Modbus TCP based server/slave devices into other PLC control systems
  • Fulll Modbus TCP Client/Master functionality, eliminates the need for an PLC controller on the Modbus TCP network
  • Connects up to 64 Modbus Servers/Slave devices
  • Max I/O data capacity of 256 bytes in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • SD memory card slot allows for backup, configuration and easy module replacement
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions  (L•W•H) 110 x 35 x 101 mm or 4,33 x 1,38 x 3,98"                                                     
Weight160g or 0,35 lbs
Operating temperature-25 to +70 °C  or  -13 to +158 °F
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC  
Current consumption Typical 150mA
USB portFor firmware upgrades
SD memory card slot For backup, configuration and easy replacement 
Modbus TCP connector2x RJ45
Fieldbus/Ethernet connector(See the secondary network interface details above)
Galvanic isolation On both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard) or Wall Mount (optional)
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus X-gateway - Modbus TCP Client - CANopen Slave

Anybus
 x-gateway-cops-mbrtu

Código: AB7895

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and Modbus RTU networks.
  • Fast copying of cyclic I/O data between CANopen and Modbus RTU networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Configuration via USB with the included Anybus Configuration Manager software
  • Robust stand-alone housing with CE and UL certifications
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway – CANopen Slave - Modbus RTU Slave

Anybus
 x-gateway-cops-mbp

Código: AB7896

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between CANopen and Modbus Plus networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - CANopen Slave - Modbus Plus Slave

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X