En ER-Soft encontraras soluciones embebidas para distintos buses de campo y en distintos formatos.
ER-Soft

En ER-Soft encontraras soluciones embebidas para distintos buses de campo y en distintos formatos.


En ER-Soft encontraras soluciones embebidas para distintos buses de campos y en distintos formatos PCI, PCIe, ABCC, ABIC. También encontraras soluciones para autómatas como ControlLogix, CompactLogix, S7-200, S7-300, S7-400, S7-1200, M340, M580


Anybus
 CB-B40-ETH

Código: AB6679

The Anybus CompactCom B40 for CC-Link IE Field is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the CC-Link IE Field network.
  • A ready-made CC-Link IE Field connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • CLPA pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1536 bytes of I/O data in each direction
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +176 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (RJ45, F.Optic) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - CC-Link IE Field

Anybus
 B40-CE

Código: AB6680

The Anybus CompactCom B40 for Common Ethernet enables fast communicationbetween your device and several industrial Ethernet networks (PROFINET, EtherCAT,EtherNet/IP, Modbus TCP, Powerlink and CC-Link IE Field). You use the same hardware for all networks
  • A ready-made Industrial Ethernet connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • One hardware platform for all Ethernet versions. Simply download new firmware to enable communication with another network
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • Pre-certified for network compliance for all networks (enables faster network certification)
  • Fast data transfer: Up to 1500 bytes of process data in each direction, Up to 1500 bytes of explicit messaging
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: Includes Email Client, Web server with customizable content, SSI functionality and FTP server (network specific)
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (RJ45, F.Optic) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - Common Ethernet

Anybus
 B40-ECT

Código: AB6677

The Anybus CompactCom B40 for EtherCAT is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the EtherCAT network.
  • A ready-made EtherCAT connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • ETG pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1486 bytes of I/O data in each direction
  • Very low process data latency - <15µs through the module
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: (EoE) Includes Email Client, Web server with customizable content, SSI functionality and FTP server
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (RJ45, F.Optic) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - EtherCAT

Anybus
 B40-EIP

Código: AB6674

The Anybus CompactCom B40 for EtherNet/IP is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the EtherNet/IP network.
  • A ready-made EtherNet/IP connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • ODVA pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1448 bytes of process data in each direction, Up to 1500 bytes of explicit messaging
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: Includes Email Client, Web server with customizable content, SSI functionality and FTP server
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (RJ45, F.Optic) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - EtherNet/IP

Anybus
 B40-MTCP

Código: AB6673

The Anybus CompactCom B40 for Modbus TCP is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the Modbus TCP network.
  • A ready-made Modbus TCP connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • Modbus pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1536 bytes of I/O data in each direction
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: Includes Email Client, Web server with customizable content, SSI functionality and FTP server
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (RJ45, F.Optic) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - Modbus TCP

Anybus
 CB-B40-ETH

Código: AB6681

The Anybus CompactCom B40 for Powerlink is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the Powerlink network.
  • A ready-made Powerlink connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • Pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1490 bytes of I/O data in each direction
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (RJ45, F.Optic) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - Powerlink

Anybus
 B40-PNT

Código: AB6675

The Anybus CompactCom B40 for PROFINET is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the PROFINET-RT or IRT network.
  • A ready-made PROFINET-RT / IRT connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • PNO pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1440 bytes of I/O data in each direction
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: Includes Email Client, Web server with customizable content, SSI functionality and FTP server
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Optical fiber version available
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (RJ45, F.Optic) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - PROFINET-IRT

Anybus
 B40-CCL

Código: AB6672

The Anybus CompactCom B40 for CC-Link is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the CC-Link network.
  • A ready-made CC-Link connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • CLPA pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 896 bit points and 128 word points of 16 bit data via CC-Link 2.0
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (D-sub, 5.08, M12) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - CC-Link

Anybus
 B40-DEV

Código: AB6671

The Anybus CompactCom B40 for DeviceNet is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the DeviceNet network.
  • A ready-made DeviceNet connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • ODVA  pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 512 bytes of I/O data in each direction
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (D-sub, 5.08, M12) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - DeviceNet

Anybus
 B40-PDP

Código: AB6670

The Anybus CompactCom B40 for PROFIBUS is a high-performance network interface in Brick format — ready-made with software and hardware to enable communication between your device and the PROFIBUS network.
  • A ready-made PROFIBUS connectivity solution
  • Flexibility to add your own connectors and peripherals to limit size and costs
  • Easy mounting to your host PCB design
  • Short in-design with free assistance from HMS ensures a fast time to market
  • PNO pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 244 bytes of I/O data in each direction
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 36 x 36 x 8 mm or 2,04 x 1,97 x 0,86"  
Operating temperature-40 to +85 °C  or  -40 to +185 °F 
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)  
Profile supportGeneric device 
LED indicatorsAvailable via host connector - Indicates Module Status and Network Status. 
ConnectorsNo: Add your own connectors (D-sub, 5.08, M12) - YES: via B40 connector board 
Galvanic isolation No: Add your own isolation - YES: via B40 connector board  
Mechanical ratingIP20, NEMA rating 1 
MountingPCB fastening via B40 connector boards available from HMS 
CertificationsCE, CULUS, RoHS 

Anybus CompactCom B40 Brick - PROFIBUS

Anybus
 M40-CCLIEF

Código: AB6609

The Anybus CompactCom M40 for CC-Link IE Field is a complete communication module which enables your products to communicate on the gigabit CC-Link IE Field network. The module supports fast communication speeds, making it suitable also for high-end indus
  • A complete, interchangeable communication module with connectors
  • Short in-design with free assistance from HMS ensures a fast time to market
  • CLPA pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1536 bytes of process data in each direction
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 52 x 50 x 22 mm or 2,04 x 1,97 x 0,86" 51 x 37 x 16 mm or 2,01 x 1,46 x 0,63" (without housing)  
Operating temperature-40 to +70 °C or -40 to +158 °F -40 to +85 °C or -40 to +176 °F (without housing)
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)
Profile supportGeneric device
LED indicatorsIntegrated on front (with housing), via application interface (without housing). Indicates Module Status and Network Status.
Connectors2x RJ45 100 Mbit/s)
Galvanic isolation YES
Mechanical ratingIP20, NEMA rating 1
MountingPCB mounting via a customized CompactFlash connector available from HMS
CertificationsCE, CULUS, RoHS 

Anybus CompactCom M40 Module - CC-Link IE Field

Anybus
 M40-CE

Código: AB6610

The Anybus CompactCom M40 for Common Ethernet enables fast communication between your device and several industrial Ethernet networks (PROFINET, EtherCAT, EtherNet/IP, Modbus TCP, Powerlink and CC-Link IE Field). You use the same hardware for all networks
  • A complete, interchangeable communication module with connectors
  • Short in-design with free assistance from HMS ensures a fast time to market
  • Pre-certified for network compliance for all networks (enables faster network certification)
  • Fast data transfer: Up to 1500 bytes of process data in each direction, Up to 1500 bytes of explicit messaging
  • One hardware platform for all Ethernet versions. Simply download new firmware to enable communication with another network for example PROFINET or EtherNet/IP
  • Very low process data latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: Includes Email Client, Web server with customizable content, SSI functionality and FTP server (network specific)
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 52 x 50 x 22 mm or 2,04 x 1,97 x 0,86" 51 x 37 x 16 mm or 2,01 x 1,46 x 0,63" (without housing)  
Operating temperature-40 to +70 °C or -40 to +158 °F -40 to +85 °C or -40 to +185 °F (without housing)
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)
Profile supportGeneric device
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsIntegrated on front (with housing), via application interface (without housing). Indicates Module Status and Network Status.
Connectors2x RJ45 100 Mbit/s)
Galvanic isolation YES
Mechanical ratingIP20, NEMA rating 1
MountingPCB mounting via a customized CompactFlash connector available from HMS
CertificationsCE, CULUS, RoHS 

Anybus CompactCom M40 Module - Common Ethernet

Anybus
 M40-ECT

Código: AB6607

The Anybus CompactCom M40 for EtherCAT is a complete communication module which enables your products to communicate on an EtherCAT network. The module supports fast communication speeds, making it suitable also for high-end industrial devices.
  • A complete, interchangeable communication module with connectors
  • Short in-design with free assistance from HMS ensures a fast time to market
  • ETG pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1448 bytes of process data in each direction, Up to 1500 bytes of explicit messaging
  • Very low latency <15µs.
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: (EoE) Includes Email Client, Web server with customizable content, SSI functionality and FTP server
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 52 x 50 x 22 mm or 2,04 x 1,97 x 0,86" 51 x 37 x 16 mm or 2,01 x 1,46 x 0,63" (without housing)  
Operating temperature-40 to +70 °C or -40 to +158 °F -40 to +85 °C or -40 to +185 °F (without housing)
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)
Profile supportGeneric device
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsIntegrated on front (with housing), via application interface (without housing). Indicates Module Status and Network Status.
Connectors2x RJ45 100 Mbit/s)
Galvanic isolation YES
Mechanical ratingIP20, NEMA rating 1
MountingPCB mounting via a customized CompactFlash connector available from HMS
CertificationsCE, CULUS, RoHS 

Anybus CompactCom M40 Module - EtherCAT

Anybus
 M40 EIP

Código: AB6604

The Anybus CompactCom M40 for EtherNet/IP is a complete communication module which enables your products to communicate on an EtherNet/IP network. The module supports fast communication speeds, making it suitable also for high-end industrial devices.
  • A complete, interchangeable communication module with connectors
  • Short in-design with free assistance from HMS ensures a fast time to market
  • ODVA pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1448 bytes of process data in each direction, Up to 1500 bytes of explicit messaging
  • Very low latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: Includes Email Client, Web server with customizable content, SSI functionality and FTP server
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 52 x 50 x 22 mm or 2,04 x 1,97 x 0,86" 51 x 37 x 16 mm or 2,01 x 1,46 x 0,63" (without housing)  
Operating temperature-40 to +70 °C or -40 to +158 °F -40 to +85 °C or -40 to +185 °F (without housing)
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)
Profile supportGeneric device
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsIntegrated on front (with housing), via application interface (without housing). Indicates Module Status and Network Status.
Connectors2x RJ45 100 Mbit/s)
Galvanic isolation YES
Mechanical ratingIP20, NEMA rating 1
MountingPCB mounting via a customized CompactFlash connector available from HMS
CertificationsCE, CULUS, RoHS 

Anybus CompactCom M40 Module - EtherNet/IP

Anybus
 M40-MTCP

Código: AB6603

The Anybus CompactCom M40 for Modbus TCP is a complete communication module which enables your products to communicate on an Modbus TCP network. The module supports fast communication speeds, making it suitable also for high-end industrial devices.
  • A complete, interchangeable communication module with connectors
  • Short in-design with free assistance from HMS ensures a fast time to market
  • Pre-certified for network compliance (enables faster network certification)
  • Fast data transfer: Up to 1536 bytes of I/O data in each direction
  • Very low latency
  • Event-based interface method enables easy access to input and output data at any time
  • Fast, event-based application hardware interfaces: 8/16-bit parallel and highspeed SPI. I/O (shift register interface) is also available.
  • IIoT ready: Includes Email Client, Web server with customizable content, SSI functionality and FTP server
  • Extended flash-based file system with two-disc access (internal and external)
  • Transparent Socket Interface handling the complete Ethernet frame (support for 20 socket connections).
  • Solid security: Mandatory software signatures prevent unauthorized software to be downloaded to the module. Furthermore, encryption is used to prevent illicit copying.
Dimensions  (L•W•H) 52 x 50 x 22 mm or 2,04 x 1,97 x 0,86" 51 x 37 x 16 mm or 2,01 x 1,46 x 0,63" (without housing)  
Operating temperature-40 to +70 °C or -40 to +158 °F -40 to +85 °C or -40 to +185 °F (without housing)
Power requirements3.3 VDC, +/- 0.15 VDC  
Application Interface 8/16-bit parallel (30 ns access) High speed SPI, baudrate configurable up to 20 MHz I/O (shift register interface, cyclical update time 82 μs) UART (for backwards compatibility with 30-series, max 625kbps)
Profile supportGeneric device
Ethernet features Transparent socket interface Support of HTTP forwarding via socket interface Integrated 2-port switch IT functions (FTP server, E-mail client, web server with SSI support)  
Internal file system Configurable up to 28 MB Two discs are available: One internal (28 MB capacity), and one reserved for accessing the application file system (capacity determined by application). 
LED indicatorsIntegrated on front (with housing), via application interface (without housing). Indicates Module Status and Network Status.
Connectors2x RJ45 100 Mbit/s)
Galvanic isolation YES
Mechanical ratingIP20, NEMA rating 1
MountingPCB mounting via a customized CompactFlash connector available from HMS
CertificationsCE, CULUS, RoHS 

Anybus CompactCom M40 Module - Modbus TCP

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X