Con los servidores serie podrás controlar los dispositivos serie a través de una red Ethernet o a través de un puerto USB.
ER-Soft

Con los servidores serie podrás controlar los dispositivos serie a través de una red Ethernet o a través de un puerto USB.


Con los servidores serie podrás controlar los dispositivos serie a través de una red Ethernet o a través de un puerto USB. La red Ethernet también puede ser WLAN/WiFI podrás también controlar los puertos serie desde internet como un puerto COM virtual del ordenador.


VScom
 NetCom Plus 111

Código: 6640

The NetCom+ 111 is an industrial-strength network-based serial device servers for connecting one RS232 device like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtual
  • Controls 1 RS232 device located virtually anywhere via Ethernet, WLAN or Internet
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 1x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
USB port USB 2.0 High Speed, for WLAN and serial port expansion
  Serial Performance
Speed 200 bps to 921.6/1000 kbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 5, 6, 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class A
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 111

VScom
 NetCom Plus 113

Código: 6645

The NetCom+ 113 is an industrial-strength network-based serial device servers for connecting one RS232 device (or RS485 communication line) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows ope
  • Controls 1 RS232/422/485 device located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 1x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232/422/485 selected by software or DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
USB port USB 2.0 High Speed, for WLAN and serial port expansion
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 3.7MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 5, 6, 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class A
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 113

VScom
 NetCom Plus 123 WLAN

Código: 6646

The NetCom+ 123 WLAN is an industrial-strength network-based serial device servers for connecting one RS232 device (or RS485 communication line) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Window
  • Controls 1 RS232/422/485 device located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface via internal module IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 1x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232/422/485 selected by software or DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
USB port USB 2.0 High Speed, for serial port expansion
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 3.7MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 5, 6, 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class A
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 123 WLAN

VScom
 NetCom Plus 211

Código: 6650

The NetCom+ 211 is an industrial-strength network-based serial device servers for connecting two RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtua
  • Controls 2 RS232 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 2x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
USB port USB 2.0 High Speed, for WLAN and serial port expansion
  Serial Performance
Speed 200 bps to 921.6/1000 kbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 5, 6, 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class A
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 211

VScom
 NetCom Plus 213

Código: 6655

The NetCom+ 213 is an industrial-strength network-based serial device servers for connecting two RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows o
  • Controls 2 RS232/422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 2x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232/422/485 individually selected by software or common by DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
USB port USB 2.0 High Speed, for WLAN and serial port expansion
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 3.7MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 5, 6, 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class A
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 213

VScom
 Model NetCom Plus 411 with WLAN

Código: 6670

The NetCom+ 411 is an industrial-strength network-based serial device servers for connecting four RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtu
  • Controls 4 RS232 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 4x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, GND
USB port USB 2.0 High Speed, for WLAN and serial port expansion
Mini PCIe slot Option: mPCIe over USB interface for 3G / 4G connections.   Uses internal SIM slot.
  Serial Performance
Speed 200 bps to 921.6/1000 kbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 411

VScom
 Model NetCom Plus 411 with WLAN

Código: 6675

The NetCom+ 413 is an industrial-strength network-based serial device servers for connecting four RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows
  • Controls 4 RS232 or RS422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 4x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232/422/485 individually selected by software or common by DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
USB port USB 2.0 High Speed, for WLAN and serial port expansion
Mini PCIe slot Option: mPCIe over USB interface for 3G / 4G connections.   Uses internal SIM slot.
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 12 MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 413

VScom
 Model NetCom Plus 411 with WLAN

Código: 6671

The NetCom+ 411 is an industrial-strength network-based serial device servers for connecting four RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virtu
  • Controls 4 RS232 devices located virtually anywhere via Ethernet, WLAN or Internet
  • LAN 1000/100/10 Ethernet auto-detect
  • Supply via Power over Ethernet 802.3af
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal moduleIEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 4x DSUB 9 male connector (as PC)
Serial interface RS232
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, GND
  Serial Performance
Speed 200 bps to 500 kbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 15 - 54V DC, 0.4A @ 19V, 8W
Power over Ethernet Class 0 Device (802.3af). Typical consumption is 6W.
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 411 POE

VScom
 Model NetCom Plus 411 with WLAN

Código: 6676

The NetCom+ 413 is an industrial-strength network-based serial device servers for connecting four RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows
  • Controls 4 RS232 or RS422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • Supply via Power over Ethernet 802.3af
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 4x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232/422/485 individually selected by software or common by DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
USB port USB 2.0 High Speed, for WLAN and serial port expansion
Mini PCIe slot Option: mPCIe over USB interface for 3G / 4G connections.   Uses internal SIM slot.
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 12 MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Power over Ethernet Class 0 Device (802.3af). Typical consumption is 6W.
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 413 POE

VScom
 NetCom Plus 811

Código: 6680

The NetCom+ 811 is an industrial-strength network-based serial device servers for connecting eight RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virt
  • Controls 8 RS232 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 8x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, GND
USB port USB 2.0 High Speed, for WLAN and serial port expansion
Mini PCIe slot Option: mPCIe over USB interface for 3G / 4G connections.   Uses internal SIM slot.
  Serial Performance
Speed 200 bps to 921.6/1000 kbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 811

VScom
 NetCom Plus 813

Código: 6685

The NetCom+ 813 is an industrial-strength network-based serial device servers for connecting eight RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows
  • Controls 8 RS232/422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 8x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232/422/485 individually selected by software or common by DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
USB port USB 2.0 High Speed, for WLAN and serial port expansion By adding 8 serial ports the NetCom Plus 813 becomes a replacement for the NetCom 1613RM PRO server.
Mini PCIe slot Option: mPCIe over USB interface for 3G / 4G connections.   Uses internal SIM slot.
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 12 MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 813

VScom
 NetCom Plus 811 POE

Código: 6681

The NetCom+ 811 is an industrial-strength network-based serial device servers for connecting eight RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs Virt
  • Controls 8 RS232 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Supply via Power over Ethernet 802.3af
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal moduleIEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 8x DSUB 9 male connector (as PC)
Serial interface RS232
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, GND
  Serial Performance
Speed 200 bps to 500 kbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 15 - 54V DC, 0.4A @ 19V, 8W
Power over Ethernet Class 0 Device (802.3af). Typical consumption is 6W.
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 811 POE

VScom
 NetCom Plus 813 POE

Código: 6686

The NetCom+ 813 is an industrial-strength network-based serial device servers for connecting eight RS232 devices (or RS485 communication lines) like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows
  • Controls 8 RS232/422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • Supply via Power over Ethernet 802.3af
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 8x DSUB 9 male connector (as PC)Expandable by USB-COM Plus modules
Serial interface RS232/422/485 individually selected by software or common by DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
USB port USB 2.0 High Speed, for WLAN and serial port expansion
Mini PCIe slot Option: mPCIe over USB interface for 3G / 4G connections.   Uses internal SIM slot.
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 12 MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Power over Ethernet Class 0 Device (802.3af). Typical consumption is 6W.
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 813 POE

VScom
 Model NetCom Plus 811 DIO with WLAN

Código: 6683

The NetCom+ 811 DIO is an industrial-strength network-based serial device servers for connecting eight RS232 devices like CNC, PLC, weighting scale, scanner and others directly to a network running TCP/IP. The driver for Windows operating system installs
  • Controls 8 RS232 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Controls 8 Digital-Input and 8 Digital-Output signals
  • LAN 1000/100/10 Ethernet auto-detect
  • Supply via Power over Ethernet 802.3af
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN, Modbus/TCP
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN, Modbus/TCP
No. of serial port 8x DSUB 9 male connector (as PC) 16 sets of clamps for Digital-I/O
Serial interface RS232
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
  Serial Performance
Speed 200 bps to 500 kbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Digital Input / Output
Input 8x isolated input signals
Contact Wet contacts on clamp pairs provide 5V. To activate close the contact by button / switch / relay / ...
Output 8x relay signals on three clamps (normal open/closed)
Switching 1A 30V DC0.25A 250V AC
  Operating Modes
Driver Mode serial VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
Digital-I/O Modbus/TCP to get values and control output signals
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 15 - 54V DC, 0.4A @ 19V, 8W
Power over Ethernet Class 0 Device (802.3af). Typical consumption is 6W.
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 811 DIO

VScom
 NetCom Plus 1613 Left Part=NetCom Plus 813

Código: 6694

The NetCom+ 1613 actually is a combination of NetCom Plus 813 with USB-8COM Plus, mounted as a pair via a special Rack Mount kit. The NetCom Plus integrates the serial ports from the USB-8COM Plus into the services for the internal port. Both devices are
  • Consists of 1xNetCom Plus 813 and 1xUSB-8COM Plus
  • Controls 16 RS232/422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN
No. of serial port 16x DSUB 9 male connector (as PC)
Serial interface RS232/422/485 individually selected by software or common by DIP-switch
Available Modes RS232 full duplexRS422 full duplex       (120Ω on/off)RS485 4 wire, full duplex    (120Ω on/off)RS485 2 wire, half duplex   (120Ω on/off)Internal Termination, controlled by operation mode BIAS resistors not required
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
Mini PCIe slot Option: mPCIe over USB interface for 3G / 4G connections.   Uses internal SIM slot.
  Serial Performance
Speed RS232: 200 bps to 921.6/1000 kbpsRS422/485: 200 bps to 12 MbpsSupports non-standard baudrates
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Driver Mode VScom Driver for Windows up to 10, Server up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using VScom NetCom protocol.
Other Modes TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W 0.8A @ 12V, 9W when USB-8COM Plus is supplied via USB
Dimension 437×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm). 2 cases!
Weight 1.9kg
Mounting 19-inch Rack
  Standards
Declarations CE
Safety EN 60950-1
ESD EN 61000-4-2 8kV contact 16kV air for Serial PortsUSBEthernetDC Power connector
EMI EN 55022 Class AEN 61000-3-2EN 61000-3-3
EMS (EN 55024) EN 61000-4-3
Power (EN 55024) EN 61000-4-4EN 61000-4-5EN 61000-4-6
  Special Features
Installation For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW Server mode.
PPP Access Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys.

NetCom Plus 1613

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X