Con los servidores serie podrás controlar los dispositivos serie a través de una red Ethernet o a través de un puerto USB.
ER-Soft

Con los servidores serie podrás controlar los dispositivos serie a través de una red Ethernet o a través de un puerto USB.


Con los servidores serie podrás controlar los dispositivos serie a través de una red Ethernet o a través de un puerto USB. La red Ethernet también puede ser WLAN/WiFI podrás también controlar los puertos serie desde internet como un puerto COM virtual del ordenador.


VScom
 Front and Back

Código: 664

NetCom 111 is an industrial-strength network-based serial device server for connecting one RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing serial dev
  • Can control 1x RS232 devices located virtually anywhere (via Ethernet or Internet)
  • Serial port DB9 male
  • LAN interface 10BaseT/100BaseTx Ethernet
  • Driver automatically finds NetCom devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and RAW Mode
  • Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
  Hardware
Processor ARM 7 TDMI 50MHz
I/O controller 16C550C or compatible
Memory 8MB SDRAM, 1 MB Flash
Connector type RJ45 for LAN, DSUB 9 female for serial Port
  Interface
LAN interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface RS232New: Connector DB9 male, not female
No. of port 1, Speed up to 460Kbps
Available Modes RS232 full duplex
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
  Performance
Speed up to 460Kbps
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ None
I/O address None
  Operating Modes
Driver Mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol.
TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings Special settings for user-defined modes.
UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data.
Null Modem Tunnel Connecting two NetCom used as virtual null modem cable.
IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation.
Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
  Power and Environment
Power requirements 9 - 30V DC, 200mA @ 12V
Power supply Adapter 12V DC 1A
Dimension  73×115×27 mm³ (W×L×H)101×121×27 mm³ with DB9 connector and ears
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 0.2kg
  Special Features
Installation Configuration utility automatically finds NetCom devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP special VScom MIB included
ART no
DNS Domain Name Server support
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser, Telnet, ComPort
LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
  Optional Accessories
DK 35A DIN-Rail mounting kit
Serial Adapter RS232 Null-Modem adapter, change male to female
VS-POE 10 Power over Ethernet Splitter, IEEE 802.3af compliant (15W max.)

NetCom 111

VScom
 NetCom 113

Código: 666

NetCom 113 is an industrial-strength network-based serial device server for connecting one RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing se
  • Can control 1x RS232/422/485 devices located virtually anywhere (via Ethernet or Internet)
  • Serial port DB9 male
  • LAN interface 10BaseT/100BaseTx Ethernet
  • Driver automatically finds NetCom devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
  • supports ART (Automatic Receive Transmit control)
  • RS232/422/485 interface selectable by Switches
  Hardware
Processor ARM 7 TDMI 50MHz
I/O controller 16C550C or compatible
Memory 8MB SDRAM, 1 MB Flash
Connector type RJ45 for LAN, DSUB 9 female for serial Port
  Interface
LAN interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface RS232/422/485 switchableNew: Connector DB9 male, not female
No. of port 1, Speed up to 460Kbps
Available Modes RS232 full duplexRS422 full duplexRS485 4 wire, full duplexRS485 2 wire, half duplex, with echoRS485 2 wire, half duplex, without echo
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control) or by RTS
  Performance
Speed up to 460Kbps
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ None
I/O address None
  Operating Modes
Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol.
TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings Special settings for user-defined modes
UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data.
Null Modem Tunnel Connecting two NetCom used as virtual null modem cable.
IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation.
Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
  Power and Environment
Power requirements 9 - 30V DC, 200mA @ 12V
Power supply Adapter 12V DC 1A
Dimension  73×115×27 mm³ (W×L×H)101×121×27 mm³ with DB9 connector and ears
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 0.2kg
  Special Features
Installation Configuration utility automatically finds NetCom devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP special VScom MIB included
ART Automatic Receive Transmit control for RS485
DNS Domain Name Server support
Serial interface Serial Interface configurable with external switch
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser, Telnet, ComPort
LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
  Optional Accessories
DK 35A DIN-Rail mounting kit
Serial Adapter RS232 Null-Modem adapter, change male to female
VS-POE 10 Power over Ethernet Splitter, IEEE 802.3af compliant (15W max.)

NetCom 113

VScom
 NetCom 211 PoE

Código: 6667

NetCom 211 PoE is an industrial-strength network-based serial device server for connecting two RS232 devices like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP. On NetCom 211 PoE the featur
  • Can control 2x RS232 devices located virtually anywhere (via Ethernet or Internet)
  • LAN interface 10BaseT/100BaseTx Ethernet
  • Powered over Ethernet IEEE 802.3af
  • Driver automatically finds NetCom devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
  Hardware
Processor ARM 7 TDMI 50MHz
I/O controller 16C550C or compatible
Memory 8MB SDRAM, 1 MB Flash
Connector type RJ45 for LAN, 2 x RJ45 -8pin for serial Port
  Interface
LAN interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface 2 x RS232
No. of port 2, Speed up to 460Kbps
Available Modes RS232 full duplex
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, GND
  Performance
Speed up to 460Kbps
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ None
I/O address None
  Operating Modes
Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol.
TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings Special settings for user-defined modes
UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data.
Null Modem Tunnel Connecting two NetCom used as virtual null modem cable.
IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation.
Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
  Power and Environment
Power requirements Dual Power supply Power over Ethernet IEEE 802.3af, Class 2 (Low power)Auxiliary power 9 - 30V DC, 250mA @ 12VPrecedence is on PoE supply. With both sources available the external DC power is used as backup power source.
Power supply Adapter 12V DC 1A (optional, not included)
Dimension  73×115×27 mm³ (W×L×H)101×115×27 mm³ with ears
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 0.3kg
  Special Features
Installation Configuration utility automatically finds NetCom devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP special VScom MIB included
ART no
DNS Domain Name Server support
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser, Telnet, ComPort
LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
  Optional Accessories
DK 35A DIN-Rail mounting kit
Serial Adapter RS232 Null-Modem adapter, change male to female
DC Power supply Adapter Power supply adapterInput AC 220V, Output DC 12V, 1A

NetCom 211 PoE

VScom
 NetCom 211

Código: 667

NetCom 211 is an industrial-strength network-based serial device server for connecting two RS232 devices like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing serial de
  • Can control 2x RS232 devices located virtually anywhere (via Ethernet or Internet)
  • LAN interface 10BaseT/100BaseTx Ethernet
  • Driver automatically finds NetCom devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
  Hardware
Processor ARM 7 TDMI 50MHz
I/O controller 16C550C or compatible
Memory 8MB SDRAM, 1 MB Flash
Connector type RJ45 for LAN, 2 x RJ45 -8pin for serial Port
  Interface
LAN interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface 2 x RS232
No. of port 2, Speed up to 460Kbps
Available Modes RS232 full duplex
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, GND
  Performance
Speed up to 460Kbps
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ None
I/O address None
  Operating Modes
Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol.
TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings Special settings for user-defined modes
UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data.
Null Modem Tunnel Connecting two NetCom used as virtual null modem cable.
IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation.
Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
  Power and Environment
Power requirements 9 - 30V DC, 250mA @ 12V
Power supply Adapter 12V DC 1A
Dimension  73×115×27 mm³ (W×L×H)101×115×27 mm³ with ears
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
  Special Features
Installation Configuration utility automatically finds NetCom devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP special VScom MIB included
ART no
DNS Domain Name Server support
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser, Telnet, ComPort
LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
  Optional Accessories
DK 35A DIN-Rail mounting kit
VS-POE 10 Power over Ethernet Splitter, IEEE 802.3af compliant (15W max.)

NetCom 211

VScom
 NetCom 411

Código: 668

NetCom 411 is an industrial-strength network-based serial device server for connecting four RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing serial de
  • Can control 4x RS232 devices located virtually anywhere (via Ethernet or Internet)
  • LAN interface 10BaseT/100BaseTx Ethernet
  • Driver automatically finds NetCom devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
  Hardware
Processor ARM 7 TDMI 50MHz
I/O controller 16C550C or compatible
Memory 8MB SDRAM, 1 MB Flash
Connector type RJ45 for LAN, DSUB 9 male for serial Port
  Interface
LAN interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface RS232
No. of port 4, Speed up to 921Kbps
Available Modes RS232 full duplex
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
  Performance
Speed up to 460Kbps
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ None
I/O address None
  Operating Modes
Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol.
TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings Special settings for user-defined modes
UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data.
Null Modem Tunnel Connecting two NetCom used as virtual null modem cable.
IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation.
Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
  Power and Environment
Power requirements 9 - 30V DC, 400mA @ 12V
Power supply Adapter 12V DC 1A
Dimension 167× 99×29 mm³ (W×L×H)189×102×30 mm³ with DB9 connectors and ears
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 0.5kg
  Special Features
Installation Configuration utility automatically finds NetCom devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP special VScom MIB included
ART no
DNS Domain Name Server support
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser, Telnet, ComPort
LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
  Optional Accessories
DK 35A DIN-Rail mounting kit
Serial Adapter Null-Modem adapter, change male to female
VS-POE 10 Power over Ethernet Splitter, IEEE 802.3af compliant (15W max.)

NetCom 411

VScom
 NetCom 413

Código: 669

NetCom 413 is an industrial-strength network-based serial device server for connecting four RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing s
  • Can control 4x RS232/422/485 devices located virtually anywhere (via Ethernet or Internet)
  • LAN interface 10BaseT/100BaseTx Ethernet
  • Driver automatically finds NetCom devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
  • supports ART (Automatic Receive Transmit control)
  • RS232/422/485 interface selectable by Switches
  Hardware
Processor ARM 7 TDMI 50MHz
I/O controller 16C550C or compatible
Memory 8MB SDRAM, 1 MB Flash
Connector type RJ45 for LAN, DSUB 9 male for serial Port
  Interface
LAN interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface RS232/422/485 switchable
No. of port 4, Speed up to 921Kbps
Available Modes RS232 full duplexRS422 full duplexRS485 4 wire, full duplexRS485 2 wire, half duplex, with echoRS485 2 wire, half duplex, without echo
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control) or by RTS
  Performance
Speed up to 460Kbps RS232, up to 921Kbps RS422/485
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ None
I/O address None
  Operating Modes
Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol.
TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings Special settings for user-defined modes
UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data.
Null Modem Tunnel Connecting two NetCom used as virtual null modem cable.
IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation.
Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
  Power and Environment
Power requirements 9 - 30V DC, 400mA @ 12V
Power supply Adapter 12V DC 1A
Dimension 167× 99×29 mm³ (W×L×H)189×102×30 mm³ with DB9 connectors and ears
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 0.5kg
  Special Features
Installation Configuration utility automatically finds NetCom devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP special VScom MIB included
ART Automatic Receive Transmit control for RS485
DNS Domain Name Server support
Serial interface Serial Interface configurable with external switch
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser, Telnet, ComPort
LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
  Optional Accessories
DK 35A DIN-Rail mounting kit
Serial Adapter Null-Modem adapter, change male to female
VS-POE 10 Power over Ethernet Splitter, IEEE 802.3af compliant (15W max.)

NetCom 413

VScom
 NetCom 811

Código: 670

NetCom 811 is an industrial-strength network-based serial device server for connecting eight RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing serial d
  • Can control 8x RS232 devices located virtually anywhere (via Ethernet or Internet)
  • LAN interface 10BaseT/100BaseTx Ethernet
  • Driver automatically finds NetCom devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
  Hardware
Processor ARM 7 TDMI 50MHz
I/O controller 16C550C or compatible
Memory 8MB SDRAM, 2 MB Flash
Connector type RJ45 for LAN, DSUB 9 male for serial Port
  Interface
LAN interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface RS232
No. of port 8, Speed up to 460Kbps
Available Modes RS232 full duplex
Signals TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
  Performance
Speed up to 460Kbps
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ None
I/O address None
  Operating Modes
Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol.
TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings Special settings for user-defined modes
UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data.
Null Modem Tunnel Connecting two NetCom used as virtual null modem cable.
IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation.
Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
  Power and Environment
Power requirements 9 - 30V DC, 600mA @ 12V, Terminal Block
Power supply Adapter 12V DC 1A
Dimension 167× 99×43 mm³ (W×L×H)189×102×44 mm³ with DB9 connectors and ears
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 0.7kg
  Special Features
Installation Configuration utility automatically finds NetCom devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP special VScom MIB included
ART no
DNS Domain Name Server support
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser, Telnet, ComPort
LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
  Optional Accessories
DK 35A DIN-Rail mounting kit
Serial Adapter Null-Modem adapter, change male to female

NetCom 811

VScom
 NetCom 813

Código: 671

NetCom 813 is an industrial-strength network-based serial device server for connecting eight RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP.In addition to allowing
  • Can control 8x RS232/422/485 devices located virtually anywhere (via Ethernet or Internet)
  • LAN interface 10BaseT/100BaseTx Ethernet
  • Driver automatically finds NetCom devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
  • Supports ART (Automatic Receive Transmit control)
  • RS232/422/485 interface selectable by Switches
  Hardware
Processor ARM 7 TDMI 50MHz
I/O controller 16C550C or compatible
Memory 8MB SDRAM, 2 MB Flash
Connector type RJ45 for LAN, DSUB 9 male for serial Port
  Interface
LAN interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
Serial interface RS232/422/485 switchable
No. of port 8, Speed up to 460Kbps RS232, up to 921Kbps RS422/485
Available Modes RS232 full duplexRS422 full duplexRS485 4 wire, full duplexRS485 2 wire, half duplex, with echoRS485 2 wire, half duplex, without echo
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control) or by RTS
  Performance
Speed up to 460Kbps RS232, up to 921Kbps RS422/485
Parity None, even, odd, space, mark
Data bits 5, 6, 7, 8
Stop bits 1, 1.5, 2
IRQ None
I/O address None
  Operating Modes
Driver mode VScom Driver for Windows NT 4.0, 2000 up to 7, Server 2000 up to 2008 R2, both x86 and x64 Editions. The Driver creates a virtual Com port, using Vscom NetCom protocol.
TCP Raw Server Raw data transfer over TCP/IP. Accepts multiple incoming connections.
TCP Raw Client Raw data transfer over TCP/IP. Connects to multiple hosts or devices waiting for incoming connections.
TCP Advanced Settings Special settings for user-defined modes
UDP Mode Raw data transfer by UDP. The NetCom is client and server at the same time. With the timeout functionality and a configurable trigger string it can make defined UDP packets of incoming data.
Null Modem Tunnel Connecting two NetCom used as virtual null modem cable.
IP Modem The serial port emulates a standard modem. Operates by AT-commands, and dials to IP-Addresses instead of phone numbers.Windows "INF"-Driver provided for installation.
Print Server The NetCom accepts print jobs, and spools them to the attached serial printer. Operates as of RFC1197, similar to the line printer daemon in Unix-systems
  Power and Environment
Power requirements 9 - 30V DC, 600mA @ 12V, Terminal Block
Power supply Adapter 12V DC 1A
Dimension 167× 99×43 mm³ (W×L×H)189×102×44 mm³ with DB9 connectors and ears
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 0.7kg
  Special Features
Installation Configuration utility automatically finds NetCom devices in the network
Operating mode Automatic mode switching between Driver and TCP RAW mode.With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automatically which mode should be used.
Configuration Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
SNMP special VScom MIB included
ART Automatic Receive Transmit control for RS485
DNS Domain Name Server support
Serial interface Serial Interface configurable with external switch
Firewall Special precautions for Firewall environments
Firmware Firmware update over WEB Browser, Telnet, ComPort
LEDs LEDs for Power, Tx, Rx, LAN Link, LAN Speed
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
  Optional Accessories
DK 35A DIN-Rail mounting kit
Serial Adapter Null-Modem adapter, change male to female

NetCom 813

VScom
 NetUSB-400i

Código: 413

The NetUSB-400i controls four USB 2.0 devices via Ethernet. The four USB ports on NetUSB-400i are seen as installed in the Windows PC. Devices connected to the ports are detected via Plug&Play. Several PC may use the same devices on a time-sharing base.
  • Controls 4 USB 2.0 devices located in the LAN
  • Auto-detecting 10/100Mbps Ethernet interface
  • Driver automatically finds USB servers on LAN
  • Supports Windows XP, Vista, 7 to 8.1
  • Protocols TCP/IP,UDP, HTTP, DHCP,ICMP,DNS
  • Administration Software
  Hardware
Processor ARM 9 170 Mhz
Memory 32MB SDRAM, 8 MB Flash
Connector type USB type A PortRJ45 for Ethernet
  Interface
Ethernet interface Auto-detecting 10BaseT/100BaseTx
Protocols TCP/IP, UDP, DHCP, ICMP, HTTP, DNS
USB interface USB 2.0 High Speed
No. of port 4
No. of devices 4
Available Modes Bulk transferIsochronous transfer
  Performance
Speed Up to 480Mbps
IRQ None
I/O address None
  Power and Environment
Power requirements 9 - 30V DC, 1.2A @ 12V
Dimension 127×92×27 mm³ (W×L×H)
Operating Temp 0°C - 55°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 300 g
  Special Features
Installation Administration utility automatically finds USB servers in the network
Configuration Configuration over Driver Panels, WEB Browser
DNS Domain Name Server support
Firmware Firmware update over Administration Software and WEB Browser
LEDs LEDs for Power, Ready, Ethernet Link/Speed, USB usage
  Optional Accessories
DK 35A DIN-Rail mounting kit

NetUSB-400i

VScom
 USB-COM Plus Mini

Código: 655

The modern USB-COM Plus Mini adapter connects one RS232 or RS422/485 device to your PC by a USB 2.0 Full Speed port.
  • Preliminary
  • 1 x RS232/422/485 port
  • USB 2.0 Full Speed interface
  • USB and serial ports ESD protected
  • Robust metal case
  • Jumperless, DIP ports configuration
  • Serial speed max. 1000(RS232) / 3000(RS485) kbps
  • DIN-Rail and Wall mount options
  • Bus powered, no external power supply
  • Wide range operating temperature (-25°C - +75°C)
  • slim case
  USB Interface
USB-Input USB 2.0 Full Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
  Serial Interface
Port 1 x RS232/422/485 configured by DIP switchRS485 Termination configured by DIP switchPolarization/BIAS not requiredConnector DSub-9 male
Speed RS232: 180bps - 921.6/1000kbpsRS422: up to 3MbpsRS485: up to 3Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)
Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GND
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Configuration One DIP switch defines operation mode and RS422/485 termination
  Software
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet
  Power and Environment
Connector USB bus powered, no external supply
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 50×72×22 mm³ (W×L×H) Case 72×72×22 mm³ (W×L×H) with mounting wings
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (0.8mm)
Weight 150g
Mounting DIN-Rail (optional)Wall mount (optional)
LEDs LEDs for Power, serial Tx, Rx

USB-COM Plus Mini

VScom
 USB-COM Plus Mini ISO

Código: 656

The modern USB-COM Plus Mini ISO adapter connects one RS232 or RS422/485 device to your PC by a USB 2.0 Full Speed port.
  • Preliminary
  • 1 x RS232/422/485 port
  • USB 2.0 Full Speed interface
  • 2.5kV isolation per serial port
  • USB and serial ports ESD protected
  • Robust metal case
  • Jumperless, DIP ports configuration
  • Serial speed max. 1000(RS232) / 3000(RS485) kbps
  • DIN-Rail and Wall mount options
  • Bus powered, no external power supply
  • Wide range operating temperature (-25°C - +75°C)
  • slim case
  USB Interface
USB-Input USB 2.0 Full Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
  Serial Interface
Port 1 x RS232/422/485 configured by DIP switchRS485 Termination configured by DIP switchPolarization/BIAS not requiredConnector DSub-9 male
Speed RS232: 180bps - 921.6/1000kbpsRS422: up to 3MbpsRS485: up to 3Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)
Signals RS232: TxD, RxD, RTS, CTS, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GNDAll signals isolated for 2.5kV
Protection Galvanically isolated 2.5kVCompliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Configuration One DIP switch defines operation mode and RS422/485 termination
  Software
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet
  Power and Environment
Connector USB bus powered, no external supply
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 50×72×22 mm³ (W×L×H) Case 72×72×22 mm³ (W×L×H) with mounting wings
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (0.8mm)
Weight 150g
Mounting DIN-Rail (optional)Wall mount (optional)
LEDs LEDs for Power, serial Tx, Rx

USB-COM Plus Mini ISO

VScom
 USB-COM Plus

Código: 601

The modern USB-COM Plus adapter connects one RS232 or RS422/485 device to your PC by a USB 2.0 Full Speed port
  • 1 x RS232/422/485 port
  • USB 2.0 Full Speed interface
  • USB and serial ports ESD protected
  • Robust metal case
  • Jumperless, DIP ports configuration
  • Serial speed max. 1000(RS232) / 3000(RS485) kbps
  • DIN-Rail and Wall mount options
  • Bus powered, no external power supply
  • Wide range operating temperature (-25°C - +75°C)
  USB Interface
USB-Input USB 2.0 Full Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
  Serial Interface
Port 1 x RS232/422/485 configured by DIP switchRS485 Termination configured by DIP switchPolarization/BIAS not requiredConnector DSub-9 male
Speed RS232: 180bps - 921.6/1000kbpsRS422: up to 3MbpsRS485: up to 3Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)
Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GND
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Configuration One DIP switch defines operation mode and RS422/485 termination
  Software
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet
  Power and Environment
Connector USB bus powered, no external supply
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (0.8mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
LEDs LEDs for Power, Ready, serial Tx, Rx

USB-COM Plus

VScom
 USB-COM Plus ISO

Código: 603

The modern USB-COM Plus ISO adapter connects one RS232 or RS422/485 device to your PC by a USB 2.0 Full Speed port.
  • 1 x RS232/422/485 port
  • USB 2.0 Full Speed interface
  • 2.5kV isolation per serial port
  • USB and serial ports ESD protected
  • Robust metal case
  • Jumperless, DIP ports configuration
  • Serial speed max. 1000(RS232) / 3000(RS485) kbps
  • DIN-Rail and Wall mount options
  • Bus powered, no external power supply
  • Wide range operating temperature (-25°C - +75°C)
  USB Interface
USB-Input USB 2.0 Full Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
  Serial Interface
Port 1 x RS232/422/485 configured by DIP switchRS485 Termination configured by DIP switchPolarization/BIAS not requiredConnector DSub-9 male
Speed RS232: 180bps - 921.6/1000kbpsRS422: up to 3MbpsRS485: up to 3Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)
Signals RS232: TxD, RxD, RTS, CTS, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GNDAll signals isolated for 2.5kV
Protection Galvanically isolated 2.5kVCompliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Configuration One DIP switch defines operation mode and RS422/485 termination
  Software
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet
  Power and Environment
Connector USB bus powered, no external supply
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (0.8mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
LEDs LEDs for Power, Ready, serial Tx, Rx

USB-COM Plus ISO

VScom
 USB-2COM Plus

Código: 605

  • 2 x RS232/422/485 ports
  • USB 2.0 Full Speed interface
  • USB and serial ports ESD protected
  • Robust metal case
  • Jumperless, DIP ports configuration
  • Serial speed max. 1000(RS232) / 3000(RS485) kbps
  • DIN-Rail and Wall mount options
  • Bus powered, no external power supply
  • Wide range operating temperature (-25°C - +75°C)
  USB Interface
USB-Input USB 2.0 Full Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
  Serial Interface
Ports 2 x RS232/422/485 configured by DIP switchRS485 Termination configured by DIP switchPolarization/BIAS not requiredConnector DSub-9 male
Speed RS232: 180bps - 921.6/1000kbpsRS422: up to 3MbpsRS485: up to 3Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)
Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GND
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Configuration One DIP switch for each port defines operation mode and RS422/485 termination
  Software
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet
  Power and Environment
Connector USB bus powered, no external supply
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (0.8mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
LEDs LEDs for Power, Ready, serial Tx, Rx

USB-2COM Plus

VScom
 USB-2COM Plus ISO

Código: 607

  • 2 x RS232/422/485 ports
  • USB 2.0 Full Speed interface
  • 2.5kV isolation per serial port
  • USB and serial ports ESD protected
  • Robust metal case
  • Jumperless, DIP ports configuration
  • Serial speed max. 1000(RS232) / 3000(RS485) kbps
  • DIN-Rail and Wall mount options
  • Bus powered, no external power supply
  • Wide range operating temperature (-25°C - +75°C)
  USB Interface
USB-Input USB 2.0 Full Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
  Serial Interface
Ports 2 x RS232/422/485 configured by DIP switchRS485 Termination configured by DIP switchPolarization/BIAS not requiredConnector DSub-9 male
Speed RS232: 180bps - 921.6/1000kbpsRS422: up to 3MbpsRS485: up to 3Mbps
Available Modes RS232 full duplexRS422 full duplexRS485 4-wire, full duplexRS485 2-wire, half duplex (bus-mode)
Signals RS232: TxD, RxD, RTS, CTS, GNDRS422: Tx+/-, Rx+/-, GNDRS485 4-wire: Tx+/-, Rx+/-, GNDRS485 2-wire: Data+/-, GNDAll signals isolated for 2.5kV
Protection Galvanically isolated 2.5kVCompliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Configuration One DIP switch for each port defines operation mode and RS422/485 termination
  Software
Driver Windows 2000 to Windows 10 (x86 and x64)Windows Server 2000 to 2012 (x86 and x64)Linux (Kernel 2.6 and later built-in)Mac OS XInstallation by automatic download from the Internet
  Power and Environment
Connector USB bus powered, no external supply
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (0.8mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wall mount (optional)
LEDs LEDs for Power, Ready, serial Tx, Rx

USB-2COM Plus ISO

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X