Soluciones de fibra óptica industriales para distintas interfaces y buses de campo.
ER-Soft

Soluciones de fibra óptica industriales para distintas interfaces y buses de campo.


Soluciones de fibra óptica industriales para distintas interfaces y buses de campo. Soluciones seguras y personalizadas para redes que necesiten una estructura en fibra óptica.


EKS Engel
  DL485 / DL485-4W

Código: DL485 / DL485-4W

The fiber optic systems DL485 connect field bus systems with RS485 interfaces. Optical linking allows safe data transfer and is suitable for MODBUS, MODNET-1/SFB, BIT-BUS, SAIA-S-BUS and several manufacturer-specific systems.
  • RS485
  • Protocol Transparent
  • Vierdraht-Interface
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL485
01000
6101
01000
6112
01000
6121
01000
6123
01000
6123-BIDI A
6123-BIDI B
01000
6131
01000
6133
01000
6135
01000
6133-BIDI A
6133-BIDI B
Article no.
DL485-2x
01000
6151
01000
6162
01000
6171
01000
6173
01000
6173-BIDI
01000
6181
01000
6183
01000
6185
01000
6183-BIDI
Data rate 1.200 Bit/s to 3 MBit/s
Transmission type Half duplex
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL485-4W
01000
6101
01000
6112
01000
6621
01000
6623
01000
6623-BIDI A
6623-BIDI B
01000
6631
01000
6633
01000
6635
01000
6633-BIDI A
6633-BIDI B
Article no.
DL485-4W-2x
01000
6151
01000
6662
01000
6671
01000
6673
01000
6673-BIDI
01000
6681
01000
6683
01000
6685
01000
6683-BIDI
Data rate 1.200 Bit/s to 3 MBit/s
Transmission type 2 x Half duplex
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Terminating resistor Switchable: none or wave impedance (Rw + Rpd + Rpu)
RS485 Cable length 1200 m (9.6–93.75 KBit/s), 250 m (500 KBit/s), 90 m (1.5 MBit/s)
RS485 Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watt, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> RS485)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC), –20 °C – +55 °C (all others)
EMC EN61000-6-2/EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL485 / DL485-4W

EKS Engel
  DL485-MBR

Código: DL485-MBR

The fiber optic systems DL485-MBR secure the optical data transfer within MODBUS networks up to a data speed of 115,2 KBit/s. Our special multifunctional fiber optic system allows the construction of optical ring structures.
  • RS485
  • Modbus
  • Redundant
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL485-MBR
01000
7951
01000
7962
01000
7971
01000
7973
01000
7973-BIDI
01000
7981
01000
7983
01000
7985
01000
7983-BIDI
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50) /125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0.3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate 9,6 KBit/s, 19,2 KBit/s, 38,4 KBit/s, 57,6 KBit/s oder 115,2 KBit/s
Transmission type Half duplex
Terminating resistor Switchable: none or wave impedance (Rw + Rpd + Rpu)
RS485 Cable length 1200 m
RS485 Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watt, 200 mA (24 V)
Potenzialtrennung 500 VDC (24 VDC <> RS485)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC), –20 °C – +55 °C (all others)
EMC EN61000-6-2/EN55022 Class B + A1 + A2
Weight 570 g
Dimensions H: 115 mm, W: 61 mm, D: 113 mm
Housing Stainless steel, powder coated

DL485-MBR

EKS Engel
  DL485-PB / DL485-PBR

Código: DL485-PB / DL485-PBR

The systems DL485-PB connect ProfiBus-field bus networks by fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.
  • RS485
  • Profibus
  • Redundant
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL485-PB
01000
6201
01000
6212
01000
6221
01000
6223
01000
6223-BIDI A
6223-BIDI B
01000
6231
01000
6233
01000
6235
01000
6233-BIDI A
6233-BIDI B
Article no.
DL485-PB-2x
01000
6251
01000
6262
01000
6271
01000
6273
01000
6273-BIDI
01000
6281
01000
6283
01000
6285
01000
6283-BIDI
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL485-PBR
01000
6351
01000
6362
01000
6371
01000
6373
01000
6373-BIDI
01000
6381
01000
6383
01000
6385
01000
6383-BIDI
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate max. 12 MBit/s
Transmission type Half duplex
Signal delay RS485 <> LWL: < 3 TBit / Tx <> Rx: 11 TBit
Terminating resistor Switchable: none or wave impedance (Rw + Rpd + Rpu)
RS 485 Cable length 1200 m (9,6–187,5 KBit/s), 400 m (500 KBit/s), 200 m (1,5 MBit/s), 100 m (3 MBit/s–12 MBit/s)
RS 485 Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> RS485)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2/EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL485-PB / DL485-PBR

EKS Engel
 DL485-MBP / DL485-MBPR

Código: DL485-MBP / DL485-MBPR

The fiber optic systems DL485-MBP connect a Modbus-Plus interface to optical field bus networks. With the help of this innovative system optical bus, star, tree and mixed structures are possible.
  • RS485
  • Modbus Plus
  • Redundant
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL485-MBP
01000
6401
01000
6412
01000
6421
01000
6423
01000
6423-BIDI A
6423-BIDI B
01000
6431
01000
6433
01000
6435
01000
6433-BIDI A
6433-BIDI B
Article no.
DL485-MBP-2x
01000
6451
01000
6462
01000
6471
01000
6473
01000
6473-BIDI
01000
6481
01000
6483
01000
6485
01000
6483-BIDI
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL485-MBP
01000
6401
01000
6412
01000
6421
01000
6423
01000
6423-BIDI A
6423-BIDI B
01000
6431
01000
6433
01000
6435
01000
6433-BIDI A
6433-BIDI B
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate max. 1 MBit/s
Transmission type Half duplex
Signal delay MODBUS Plus Interface <> LWL: < 400 ns / Tx <> Rx: 500 ns
MBPR: MODBUS Plus Interface <> LWL : < 1 μs
Terminating resistor Acc. to MODBUS Plus specification there are no terminating resistors
RS485 Cable length 50 m
RS485 Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> RS485)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL485-MBP / DL485-MBPR

EKS Engel
 DL CAN / DL CAN-R

Código: DL CAN / DL CAN-R

The systems DL CAN connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.
  • CAN Bus
  • DeviceNet
  • Redundant
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL CAN
01000
7401
01000
7412
01000
7421
01000
7423
01000
7423-BIDI A
7423-BIDI B
01000
7431
01000
7433
01000
7435
01000
7433-BIDI A
7433-BIDI B
Article no.
DL CAN-2x
01000
7451
01000
7462
01000
7471
01000
7473
01000
7473-BIDI
01000
7481
01000
7483
01000
7485
01000
7483-BIDI
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL CAN-R
01000
7551
01000
7562
01000
7571
01000
7573
01000
7573-BIDI
01000
7581
01000
7583
01000
7585
01000
7583-BIDI
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate max. 10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu)
Transmission type Half duplex
Identifier 11 Bit, 29 Bit or both
Terminating resistor Switchable: none or wave impedance (Rw + Rpd + Rpu)
CAN Cable length Acc. to CAN Specification
CAN Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> CAN)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2/EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL CAN / DL CAN-R

EKS Engel
 DL422

Código: DL422

The fiber optic systems DL422 connect applications with a RS422 interface via fiber optics.
  • RS485
  • Profibus
  • Redundant
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL422
01000
2101
01000
2112
01000
2121
01000
2123
01000
2123-BIDI A
2123-BIDI B
01000
2131
01000
2133
01000
2135
01000
2133-BIDI A
2133-BIDI B
Article no.
DL422-2x
01000
2151
01000
2162
01000
2171
01000
2173
01000
2173-BIDI
01000
2181
01000
2183
01000
2185
01000
2183-BIDI
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate max. Point-to-point structure: 1.5 MBit/s max. / Line topology: 1.5 MBit/s divided by no. of DL422 systems
Transmission type Duplex, Half duplex at DL422-2x
Terminating resistor Switchable: none or wave impedance (Rw + Rpd + Rpu)
RS422 Cable length 50 m
RS422 Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> RS422)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2/EN55022 + A1 + A2 Class B
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL422

EKS Engel
 DL232 / DL232-R

Código: DL232 / DL232-R

The fiber optic systems DL232 connect systems with a RS232- interface via fiber optics. The DL232 allows communication via software-handshake (X-ON/X-OFF). With the help of this innovative system optical bus, star, tree and mixed structures are possible.
  • RS232
  • Protocol Transparent
  • Redundant
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL232
01000
1101
01000
1112
01000
1121
01000
1123
01000
1123-BIDI A
1123-BIDI B
01000
1131
01000
1133
01000
1135
01000
1133-BIDI A
1133-BIDI B
Article no.
DL232-2x
01000
1151
01000
1162
01000
1171
01000
1173
01000
1173-BIDI
01000
1181
01000
1183
01000
1185
01000
1183-BIDI
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL232-R
01000
1351
01000
1362
01000
1371
01000
1373
01000
1373-BIDI
01000
1381
01000
1383
01000
1385
01000
1383-BIDI
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate max. 115,2 KBit/s
Transmission type Duplex, Half duplex bei DL232-2x und DL232-R
Operation mode Switchable: none or wave impedance (Rw + Rpd + Rpu) DTE oder DCE
RS232 Cable length 15 m
RS232 Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> RS232)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL232 / DL232-R

EKS Engel
 DL232-MUX

Código: DL232-MUX

The system DL232-MUX is a multiplexer for 4xRS232 signals, working bidirectionally via fiber optics. Thus, in addition to the RxD and TxD signals, hardware-handshake signals as RTS, CTS, DCD, DSR and DTR can be transferred, too.
  • RS232
  • Multiplexer
  • 4-Kanal bidirektional
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL232
01000
1201
01000
1212
01000
1221
01000
1223
01000
1223-BIDI A
1223-BIDI B
01000
1231
01000
1233
01000
1235
01000
1233-BIDI A
1233-BIDI B
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate max. 115,2 KBit/s
Transmission type Duplex
Operation mode up to RS232-signals bi-directional
RS232 Cable length 15 m
RS232 Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> RS232)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL232-MUX

EKS Engel
 DL TTY

Código: DL TTY

The system DL TTY forms an asynchronous TTY- interface (20 mA active, half-active or passive) which can be operated in two ways: either half-duplex or full-duplex (please note the schematics opposite).
  • TTY
  • Half- and Fullduplex
  • Aktiv-, Halbaktiv- und Passiv-Betrieb
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL TTY
01000
4101
01000
4112
01000
4121
01000
4123
01000
4123-BIDI A
4123-BIDI B
01000
4131
01000
4133
01000
4135
01000
4133-BIDI A
4133-BIDI B
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate max. 57,6 KBit/s
Loop Current 2 x 20 mA
Load <100 Ohm
Operation mode Duplex: aktiv, halbaktiv oder passiv / Half duplex: aktiv oder passiv
TTY Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> TTY)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL TTY

EKS Engel
 DL LWV

Código: DL LWV

The fiber optic system DL LWV works as amplifier and media converter for several fiber optic transmission networks.
  • Media Converter
  • Protocol Transparent
  • Optical Amplifier
  • Koppler
Type F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16
FO-connector HP VL HP VL ST SMA ST SMA ST SC ST SC SC BIDI E-2000 ST SC SC BIDI E-2000
Fiber type POF
980/1000 μm
POF
980/1000 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 29 dB 12 dB 12 dB 12 dB 12 dB 8 (4,2) dB 12 dB 16 dB
Data rate max. 57,6
KBit/s
10
MBit/s
5
MBit/s
100
MBit/s
5
MBit/s
100
MBit/s
100
MBit/s
FO range 150 m 40 m 40 m 2,6 (1,4) km 5 km 30 km, others up to 100 km on request
Faserdämpfung 180 dB/km 3 dB/km 1 dB/km 0,3 dB/km
Wavelength 650 nm 820 nm 1310 nm 1310 nm
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 500 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

DL LWV

EKS Engel
 IOL3000

Código: IOL3000

The fiber optic system IOL3000 transmits digital signals (e.g., contact closures, control-signals) and analog signals via fiber optics.
  • 4 x Analog Signal, 8 x Digital Signal
  • Point-to-Point Structure
  • Stainless Steel, Powder Coated
  • Top-Hat Rail
Transmitter IOL3000 P-ST H-ST MM-ST MM-SC         SM-ST SM-SC SM-E2        
4 x Analog 0–10 V 03000
1101
03000
1112
03000
1121
03000
1123
  03000
1131
03000
1133
03000
1135
 
4 x Analog 0–10 V
8 x Digital 12–24 VDC
03000
1201
03000
1212
03000
1221
03000
1223
  03000
1231
03000
1233
03000
1235
 
8 x Digital 12–24 VDC 03000
1301
03000
1312
03000
1321
03000
1323
  03000
1331
03000
1333
03000
1335
 
4 x Analog 0–20 mA
8 x Digital 12–24 VDC
03000
1401
03000
1412
03000
1421
03000
1423
  03000
1431
03000
1433
03000
1435
 
4 x Analog 0–20 mA 03000
1501
03000
1512
03000
1521
03000
1523
  03000
1531
03000
1533
03000
1535
 
Receiver IOL3000 P-ST H-ST MM-ST MM-SC         SM-ST SM-SC SM-E2        
4 x Analog 0–10 V 03000
2101
03000
2112
03000
2121
03000
2123
  03000
2131
03000
2133
03000
2135
 
4 x Analog 0–10 V
8 x Digital 12–24 VDC
03000
2201
03000
2212
03000
2221
03000
2223
  03000
2231
03000
2233
03000
2235
 
8 x Digital 12–24 VDC 03000
2301
03000
2312
03000
2321
03000
2323
  03000
2331
03000
2333
03000
2335
 
4 x Analog 0–20 mA
8 x Digital 12–24 VDC
03000
2401
03000
2412
03000
2421
03000
2423
  03000
2431
03000
2433
03000
2435
 
4 x Analog 0–20 mA 03000
2501
03000
2512
03000
2521
03000
2523
  03000
2531
03000
2533
03000
2535
 
FO-connector ST ST ST SC   ST SC E-2000  
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Accuracy Receiver 0,2 %
Cable length 1 m
Connector 16-pole Screw-Terminal
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

IOL3000

EKS Engel
 IOL3100

Código: IOL3100

The fiber optic system IOL3100 transmits digital signals (e.g., contact closures, control-signals (12–24 VDC) bi-directional via fiber optics.
  • 4 x Digital control-signals bi-directional
  • Point-to-Point-System
  • Stainless Steel, Powder Coated
  • Top-Hat Rail
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
IOL3100
03100
2301
03100
2312
03100
2321
03100
2323
03100
2323-BIDI A
2323-BIDI B
03100
2331
03100
2333
03100
2335
03100
2333-BIDI A
2333-BIDI B
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Signal input 12–24 VDC / 5 mA
Signal output 30 VDC (1A) / 60 VDC (0,2 A)
Cable length 1 m
Connector 16-pole Screw-Terminal
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

IOL3100

EKS Engel
 IOL3200

Código: IOL3200

The fiber optic system IOL3200 transmits digital signals (e.g., contact closures, control-signals) via fiber optics.
  • 4 x Digital control-signals bi-directional
  • Point-to-Point-System
  • Stainless Steel, Powder Coated
  • Top-Hat Rail
Transmitter P-ST H-ST MM-ST MM-SC   SM-ST SM-SC SM-E2  
Article no.
IOL3200-TX-12D
03200
1301
03200
1312
03200
1321
03200
1323
  03200
1331
03200
1333
03200
1335
 
Receiver P-ST H-ST MM-ST MM-SC   SM-ST SM-SC SM-E2  
Article no.
IOL3200-RX-12D
03200
2301
03200
2312
03200
2321
03200
2323
  03200
2331
03200
2333
03200
2335
 
FO-connector ST ST ST SC   ST SC E-2000  
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Signal input 12–24 VDC / 5 mA
Signal output 30 VDC (1A) / 60 VDC (0,2 A)
Cable length 1 m
Connector 16-pole Screw-Terminal
Status-LEDs Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

IOL3200

EKS Engel
 IOL3300

Código: IOL3300

The fiber optic system IOL3300 transmits digital signals (e.g., contact closures, control-signals) via fiber optics.
  • 1 x Contact Closure bi-directional
  • Point-to-Point-System
  • Polyamide, black
  • Top-Hat Rail

IOL3300

EKS Engel
 IOL3400

Código: IOL3400

The FO-system IOL3400 is used for the uni directional transmission of a S0 impulse output.
  • 1 x S0-IMPULSE Signal
  • Point-to-Point-System
  • Polyamid Housing
  • Top-Hat Rail
Type P-ST H-ST MM-ST MM-SC   SM-ST SM-SC SM-E2  
Article no.
IOL3400
03400
2301
03400
2312
03400
2321
03400
2323
  03400
2331
03400
2333
03400
2335
 
FO-connector ST ST ST SC   ST SC E-2000  
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm   1310 nm  
Signal input acc. to EN62053-31, Class A or Class B depending on IOL-3400 Power supply
Signal output acc. to EN62053-31
Cable length 1 m
Fehlerrelais 24 VDC (1A) / 60 VDC (0,3 A)
Status-LEDs Power supply (green) / Data (yellow) / Status (red)
Power supply 12–30 VDC
Power consumption 2,5 Watts, 100 mA (24 V)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2 / EN55022 Class B + A1 + A2
Weight 150 g
Dimensions 22,5 x 93 x 82 mm
Housing Polyamid, black

IOL3400

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X