Cod: DL CAN / DL CAN-R - Nombre: DL CAN / DL CAN-R

EKS Engel
DL CAN / DL CAN-R

CAN-FO-System PROTOCOL TRANSPARENT

The systems DL CAN connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.

Características destacadas

  • CAN Bus
  • DeviceNet
  • Redundant
  • FiberView
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL CAN
01000
7401
01000
7412
01000
7421
01000
7423
01000
7423-BIDI A
7423-BIDI B
01000
7431
01000
7433
01000
7435
01000
7433-BIDI A
7433-BIDI B
Article no.
DL CAN-2x
01000
7451
01000
7462
01000
7471
01000
7473
01000
7473-BIDI
01000
7481
01000
7483
01000
7485
01000
7483-BIDI
Type P-ST H-ST MM-ST MM-SC MM-SC/BIDI SM-ST SM-SC SM-E2 SM-SC/BIDI
Article no.
DL CAN-R
01000
7551
01000
7562
01000
7571
01000
7573
01000
7573-BIDI
01000
7581
01000
7583
01000
7585
01000
7583-BIDI
FO-connector ST ST ST SC SC ST SC E-2000 SC
Fiber type POF
980/1000 μm
HCS
200/230 μm
Multimode
62,5 (50)/125 μm
Singlemode
9/125 μm
Optical budget 12 dB 12 dB 12 dB 16 dB
FO range 50 m
(180 dB/km)
200 m
(8 dB/km)
5 km
(1 dB/km)
30 km, others up to 100 km on request
(0,3 dB/km)
Wavelength 650 nm 850 nm 1310 nm 1310 nm
1550 nm
1310 nm 1310 nm
1550 nm
Data rate max. 10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu)
Transmission type Half duplex
Identifier 11 Bit, 29 Bit or both
Terminating resistor Switchable: none or wave impedance (Rw + Rpd + Rpu)
CAN Cable length Acc. to CAN Specification
CAN Connector 9-pole Sub-D female and 6-pole terminal
Status-LEDs Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green)
Power supply 12–30 VDC, other voltages on request
Power consumption 5 Watts, 200 mA (24 V)
Potential separation 500 VDC (24 VDC <> CAN)
Operating temperature –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others)
EMC EN61000-6-2/EN55022 Class B + A1 + A2
Weight 570 g
Dimensions 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
Housing Stainless steel, powder coated

The systems DL CAN connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.

The special multifunctional fiber optic system DL CAN-R also allows the construction of optical ring structures.

LEDs and potential-free contacts of a fault detector relay are able to signal defective states.

FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.

Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X