Cod: AWB2020 - Nombre: Anybus Wireless Bolt - CAN and Ethernet

Anybus
Anybus Wireless Bolt Mounting and Connector

Anybus Wireless Bolt - CAN and Ethernet

Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).

Características destacadas

  • Configure or troubleshoot industrial machinery over a wireless network
  • Increase flexibility and mobility. Eliminate expensive fixed HMI’s by using a laptop, tablet or smartphone
  • Connect to moving field equipment such as an AGV’s (Automated Guided Veicles)
  • Connect to a Cloud Service of your choice or get live data and integrate it into a SCADA system
  • Support for CAN based devices and machines
  • Supports Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET, TCP/UDP
  • Unique method to handle interference disturbances without consequences to the Bluetooth conformity or the interoperability with other devices
  • Uses Dual-band Wi-Fi 2.4/5 GHz to connect easier and identify interference-free channels
  • All-in-one package: Connector, communication processor and integrated antenna in the same unit
  • Includes a configurable Digital Input to control e.g. roaming behavior. Max. 3m signal cable
  • Uses the ARM mbed 3.0 IoT Device Platform.
  • Simultaneous operation of Bluetooth and WLAN allowing for bridging and redundancy between the two networks
  • Security features for a secure industrial operation
Dimensions Diameter: 70 mm. Height: 70 mm (95 mm including connector. Outside height: 41 mm)
Weight 81g
TemperatureOperating: -40 to +65 °C  or -40 to +149 °F  - Storage: -40 to +85 °C  or -40 to +185 °F
Output Power WLAN 16 dBm - Bluetooth 10 dBm - Bluetooth Low Energy 7 dBm 
Power supply 9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
Power consumption 0.7W idle, 1.7W max (54mA@24VDC with WLAN and 36mA@24VDC with Bluetooth)
Enclosure materialPlastic: PBT/PBT glass-reinforced/PC-ABS
Mechanical rating IP67 for top (outside the host), IP21 for bottom (inside the host)
MountingM50 screw and nut (50.5 mm hole needed)
Max Range  100 meters
Antenna Internal 
ConnectorIncluded plug connector (2x9p; 3.5mm, Phoenix DFMC 1.5/9-ST-3.5, push-in spring connection)
Vibration compatibilitySinosodial vibration test according to IEC 60068-2-6:2007 and with extra severities; Number of axes: 3 mutually perpendicular (X:Y:Z), Duration: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operation, Frequency: 5-500 Hz, Displacement ±3.5 mm, Acceleration: 2g. Shock test according to IEC 60068-2-27:2008 and with extra severities; Wave shape: half sine, Number of shocks: ±3 in each axes, Mode: In operation, Axes ± X,Y,Z, Acceleration: 30 m/s2 , Duration: 11 ms. 
CERTIFICATIONS  
EuropeETSI R&TTE 
USA FCC/CFR 47 part 15 unlicensed modular transmitter approval 
CanadaICC RSS
JapanMIC (pending, pre-certified radio module)
South Korea NCC (pending, pre-certified radio module)
TaiwanKCC (pending, pre-certified radio module)
UL-Haz.Loc cUL Class 1 Div 2

Anybus Wireless Bolt enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, Bluetooth Low Energy® or WLAN (WiFi).

On the wired side, the Anybus Wireless Bolt communicates over CAN and Industrial Ethernet, supporting protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as TCP/IP and UDP.


CONFIGURE MACHINES WIRELESSLY

Anybus Wireless Bolt gives you direct access to configure or troubleshoot your machinery. With a range of 100 meters you can access the internal web pages via a laptop, tablet or smartphone. BYOD (Bring Your Own Device) means that you no longer need an expensive HMI. A machine operator or technician does not need to be physically located at the machine to gain access.

 

an all-in-one solution

With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an exterior IP67 protection class. Regardless of communication method you select, you have the same connector (2x9p Plug Connector) for both power and communication.

Configuration

     

Mounting

You can configure the Anybus Wireless Bolt simply by accessing the built-in web pages in the product. In addition, you can also send AT commands or use Easy Config modes
      The Anybus Wireless Bolt is mounted into a 50.5 mm (M50) hole in the host device. The top "helmet” goes on the outside and provides an IP67 exterior. The bottom is located inside the machine or cabinet (IP21). 


           


 

Interface features

wlan (wifi) interface

  • Supports Dual-Band WLAN 2.4/5 Ghz frequency
  • Conforms to IEEE802.11 a/b/g/d/e/i/h specification
  • Operates as an Access point or Client
  • Connects up to 7 Slaves as an Access point
  • Max throughput: 20 Mbps
  • Max Range: 100 meters
  • Security support: WEP64, WEP128,WPA-PSk, WPA2-PSk, TkIP, CCMP (AES) and LEAP, PEAP


ETHERNET FEATURES

  • Supports Ethernet protocols: IP, TCP, UDP, HTTP, LLDP, ARP, DHCP Client/Server, DNS support
  • Supports wireless bridging of Industrial Ethernet protocols: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET
  • Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over

CAN INTERFACE

  • Isolated CAN
  • Max baud rate 1 Mbps
           

BLUETOOTH INTERFACE

  • Supports Bluetooth v4.0
  • Supports profiles: SPP, DUN PANU & NAP
  • Operates as an Access point or Client
  • Connects up to 7 Slaves as an Access point
  • Max throughput: 1 Mbps
  • Max Range: 100 meters
  • Security support: Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved

BLUETOOTH LOW ENERGY INTERFACE (pending)

  • Supports Bluetooth v4.0
  • Supports profiles:GATT
  • Operate mode: Central or Peripheral
  • Connects up to 10 Slave for Central
  • Max throughput: 200 Kbps
  • Max Range: 100 meters
  • Security support: AES-CCM cryptography

DIGTITAL INTERFACE

  • Digital Input to control e.g. roaming behavior. Max. 3m signal cable
Order Code  AWB2020 (Available from Q1 2017)             
Included components                  Quick start guide, manuals. (Power supply not included)  
Guarantee         3 years  
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X