Pasarelas de comunicación industrial de Acksys
Acksys

Pasarelas de comunicación industrial de Acksys


Pasarelas de comunicación industrial de Acksys


Acksys
 COMETH RS232 compact single port server

Código: COMETH-LITE

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, making it possible to communicate between two distant serial equipments through the network or even build an Ethernet
  • Dongle format
  • RS232, RS422, RS485 interfaces
  • Easy administration from serial port or Ethernet
  • MODBUS/TCP (Client / Server) protocol support
  • Raw, Mux., and COM ports re-direction modes
  • Metallic case, CE standards
    Serial port     Single asynchronous serial port, up to 230.4 Kbps 7 or 8 bits per character, 1 or 2 stop bits, even, odd, mark, space or no parity Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF)    
    RS signals available     RS232 : TxD, RxD (3 Tx signals, 5 Rx signals), RTS, DTR, CTS, DCD, DSR, RI (The pin can be used as remote power supply pin)    
    Connectors     Female SUB D9 (crossed DTE)  
    Protection     15KV ESD protection with HF signal filtering, CE conformity, RS/Ethernet 1500 Veff isolation   
    Ethernet Network     10 Base T Ethernet, 10/100 compatible (RJ 45), the COMETH Ethernet interfaces are compatible with any 10/100 Base TX equipment (network card or HUB) featuring self-commutation, the serial data transfer between the COMETH and the hub is carried out at 10 Mb/s while the data transfer between the hub and the rest of the network is carried out at 100 Mb/s    
    Modes     Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols    
    Administration     From the serial port or through Ethernet (Telnet), firmware download for easy upgrade    
    Operating systems     Any compatible TCP/IP system  
    Signaling     1 diag. LED, 1 LAN LED & 1 RS232 LED  
    Power supply     Jack external (+4,5VDC to +5,5VDC) or remote power supply (SUB D connector, pin 9)    
    Environment     Operating temperature: 0°C to +70°C  
    Dimensions and weight     COMETH: L80 x l23 x h24 mm, 35 g COMETH-LITE: L65 x l20 x h2 mm, 5 g    

COMETH

Acksys
 COMETH-FIELD-RD RS232-RS422-RS485 DIN Rail single port server

Código: COMETH-FIELD-RD

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, making it possible to communicate between two distant serial equipments through the network or even build an Ethernet
  • DIN Rail format
  • RS232, RS422, RS485 interfaces
  • Easy administration from serial port or Ethernet
  • MODBUS/TCP (Client / Server) protocol support
  • Raw, Mux., and COM ports re-direction modes
  • Metallic case, CE standards
    Serial port   Single asynchronous serial port, up to 230.4 Kbps 7 or 8 bits per character, 1 or 2 stop bits, even, odd, mark, space or no parity Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF)    
    RS signals available   RS232 : TxD, RxD (3 Tx signals, 5 Rx signals), RTS, DTR, CTS, DCD, DSR, RI RS422/485 : -Tx, +Tx, -Rx, +Rx. +RX and –RX signals can be polarized (jumpers)    
    Connectors   Male SUB D9 (RS232) & female SUB D9 (RS422/485)    
    Protection   15KV ESD protection with HF signal filtering, CE conformity, RS/Ethernet 1500 Veff isolation    
    Ethernet Network   Ethernet 10/100 "auto-sensing" & "auto MDI / MDIX cross-over"    
    Modes   Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols    
    Administration   From the serial port or through Ethernet (Telnet), firmware download for easy upgrade    
    Operating systems     Any compatible TCP/IP system  
    Signaling   1 power LED, 1 diag. LED, 1 serial LED & 2 LAN LEDs    
    Power supply   External power supply +9VDC to +36VDC    
    Environment   Operating temperature: -40°C to +80°C    
    Dimensions and weight   L73 x l76 x h29 mm, 120 g    

COMETH-FIELD-RD

Acksys
 COMETH-EMBD Serial TTL PCB single port server

Código: COMETH-EMBD

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network or even build an Ethernet /
  • Circuit format
  • RS232, RS422, RS485 interfaces
  • Easy administration from serial port or Ethernet
  • MODBUS/TCP (Client / Server) protocol support
  • Raw, Mux., and COM ports re-direction modes
  • Metallic case, CE standards
    Serial port   Single asynchronous serial port, up to 230.4 Kbps 7 or 8 bits per character, 1 or 2 stop bits, even, odd, mark, space or no parity Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF)    
    RS signals available   RS232 : TxD, RxD (3 Tx signals, 5 Rx signals), RTS, DTR, CTS, DCD, DSR, RI (The pin can be used as remote power supply pin)    
    Connectors   High density connectors    
    Protection   15KV ESD protection with HF signal filtering, CE conformity, RS/Ethernet 1500 Veff isolation    
    Ethernet Network   10 Base T Ethernet, 10/100 compatible (RJ 45),TTL signals for the COMETH-EMBD (an external Ethernet isolation transformer is required for the network connection). 10 Base T Ethernet, 10/100 compatible (RJ 45) for the COMETH-EMBD-EVAL. The COMETH Ethernet interfaces are compatible with any 10/100 Base TX equipment (network card or HUB) featuring self-commutation, the serial data transfer between the COMETH and the hub is carried out at 10 Mb/s while the data transfer between the hub and the rest of the network is carried out at 100 Mb/s.    
    Modes    Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols    
    Administration   From the serial port or through Ethernet (Telnet), firmware download for easy upgrade    
    Operating systems   Any compatible TCP/IP system    
    Signaling    1 diag. LED, 1 LAN LED & 1 RS232 LED (COMETH EMBD-ETH only)    
    Power supply   External, +3,3VDC or +4,5VDC to +5,5VDC    
    Environment   Operating temperature: 0°C to +70°C    
    Dimensions and weight   L65 x l20 x h2 mm, 5 g    

COMETH-EMBD

Acksys
 COMETH-EMBD Serial TTL PCB single port server

Código: COMETH-EMBD-ETH

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network or even build an Ethernet /
  • Circuit format
  • RS232, RS422, RS485 interfaces
  • Easy administration from serial port or Ethernet
  • MODBUS/TCP (Client / Server) protocol support
  • Raw, Mux., and COM ports re-direction modes
  • Metallic case, CE standards
    Serial port   Single asynchronous serial port, up to 230.4 Kbps 7 or 8 bits per character, 1 or 2 stop bits, even, odd, mark, space or no parity Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF)    
    RS signals available   RS232 : TxD, RxD (3 Tx signals, 5 Rx signals), RTS, DTR, CTS, DCD, DSR, RI (The pin can be used as remote power supply pin)    
    Connectors   High density connectors    
    Protection   15KV ESD protection with HF signal filtering, CE conformity, RS/Ethernet 1500 Veff isolation    
    Ethernet Network   10 Base T Ethernet, 10/100 compatible (RJ 45),TTL signals for the COMETH-EMBD (an external Ethernet isolation transformer is required for the network connection). 10 Base T Ethernet, 10/100 compatible (RJ 45) for the COMETH-EMBD-EVAL. The COMETH Ethernet interfaces are compatible with any 10/100 Base TX equipment (network card or HUB) featuring self-commutation, the serial data transfer between the COMETH and the hub is carried out at 10 Mb/s while the data transfer between the hub and the rest of the network is carried out at 100 Mb/s.    
    Modes    Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols    
    Administration   From the serial port or through Ethernet (Telnet), firmware download for easy upgrade    
    Operating systems   Any compatible TCP/IP system    
    Signaling    1 diag. LED, 1 LAN LED & 1 RS232 LED (COMETH EMBD-ETH only)    
    Power supply   External, +3,3VDC or +4,5VDC to +5,5VDC    
    Environment   Operating temperature: 0°C to +70°C    
    Dimensions and weight   L65 x l20 x h2 mm, 5 g    

COMETH-EMBD

Acksys
 COMETH-EMBD Serial TTL PCB single port server

Código: COMETH-EMBD-EVAL

COMETH range products give access to any serial equipment from Windows, Unix & Linux computers connected to your Ethernet TCP/IP network, make it possible to communicate between two distant serial equipments through the network or even build an Ethernet /
  • Circuit format
  • RS232, RS422, RS485 interfaces
  • Easy administration from serial port or Ethernet
  • MODBUS/TCP (Client / Server) protocol support
  • Raw, Mux., and COM ports re-direction modes
  • Metallic case, CE standards
    Serial port   Single asynchronous serial port, up to 230.4 Kbps 7 or 8 bits per character, 1 or 2 stop bits, even, odd, mark, space or no parity Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF)    
    RS signals available   RS232 : TxD, RxD (3 Tx signals, 5 Rx signals), RTS, DTR, CTS, DCD, DSR, RI (The pin can be used as remote power supply pin)    
    Connectors   High density connectors    
    Protection   15KV ESD protection with HF signal filtering, CE conformity, RS/Ethernet 1500 Veff isolation    
    Ethernet Network   10 Base T Ethernet, 10/100 compatible (RJ 45),TTL signals for the COMETH-EMBD (an external Ethernet isolation transformer is required for the network connection). 10 Base T Ethernet, 10/100 compatible (RJ 45) for the COMETH-EMBD-EVAL. The COMETH Ethernet interfaces are compatible with any 10/100 Base TX equipment (network card or HUB) featuring self-commutation, the serial data transfer between the COMETH and the hub is carried out at 10 Mb/s while the data transfer between the hub and the rest of the network is carried out at 100 Mb/s.    
    Modes    Support for TCP Client/Server, DHCP Client, TELNET RFC2217 extension, Telnet Server, COM port re-director (VIP), multipoint or point to point virtual link over UDP modes and MODBUS/TCP Client/Server, MODBUS/RTU & MODBUS/ASCII protocols    
    Administration   From the serial port or through Ethernet (Telnet), firmware download for easy upgrade    
    Operating systems   Any compatible TCP/IP system    
    Signaling    1 diag. LED, 1 LAN LED & 1 RS232 LED (COMETH EMBD-ETH only)    
    Power supply   External, +3,3VDC or +4,5VDC to +5,5VDC    
    Environment   Operating temperature: 0°C to +70°C    
    Dimensions and weight   L65 x l20 x h2 mm, 5 g    

COMETH-EMBD

Acksys
 USB400 Serial RS422 - RS485 to USB bus adapter

Código: USB400

The range of serial to USB solution offers performance, simplicity of installation, security, robustness and high reliability at affordable prices.
  • RS422 & RS485 serial interface
  • Speed up to 921.6 Kbps, full duplex
  • RS485 automatic line direction control
  • Support for 4-wire RS422/RS485 and 2-wire RS485
  • 2 LEDs for independent TxD & RxD signaling
  • Host bus powered
  • Hot “Plug & Play”, USB 1.1 full speed (2.0 compatible)
  • Standard COM ports full compatible
  • 15 KV ESD protection and HF filtering
  • Robust & compatible aluminium case (dongle), CE standards
    Interfaces   One RS422 / RS485 asynchronous serial ports for USB bus    
    RS signals   RS422 mode: A, A’, B, B’ & GND - RS485 mode: AA’, BB’ & GND    
    Format   Asynchronous 5, 6, 7 or 8 bits per character 1, 11/2, 2 stop bits Even, odd, mark, space or no parity    
    Data rate   From 50 to 921.6 Kbps    
    FIFOS   32 bytes    
    Hand-shake   Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF) with automatic line direction control in the RS485 mode.    
    RS connectors   5-point screw-in terminal block    
    Protection   15KV ESD protection with HF signal filtering, CE conformity     
    Signaling   2 LEDs to monitor TxD & RxD signals activity, one LED for power supply    
    Power supply   Powered from USB bus    
    Operating systems     Windows 9x, Windows 2000, Windows XP, Linux 2.4 & 2.6  
    Consumption   0,4 W maximum    
    Configuring   "Plug & Play" equipment, quick & easy Windows installation, RS422 / RS485 mode, polarization and line termination are switches configurable.    
    EMC   NF EN 55022 residential emission, NF EN 61000-6-2 industrial immunity    
    Environment   Operating temperature from -5°C to +65°C, storage -40°C to +80°C, 0 to 95% relative humidity without condensation    
    Installation   "Dongle" format, shipped with a 2 meter A/B type USB cable    
    Dimensions    73 mm (L) x 25 mm (l) x 21 mm (H)    
    Weight   36 g     
    Accessories   Screwdriver to screw-in the RS422/485 cable in the terminal block    

USB400

Acksys
 USBPort Isolated RS232-RS422-RS485 USB serial Hub

Código: USBPort/2

This new range of serial to USB solution (USBPort/x) offers performance, simplicity of installation, security, robustness and high reliability at affordable prices.
  • 2 or 4 ports 3-in-1 serial interface : RS232/RS4522/RS485 (1500V isolation)
  • Data rate from 300 Kbps to 3 Mbps on each port
  • RS485 automatic line direction control
  • Support for 4-wire RS422/RS485 and 2-wire RS485
  • Independent TxD & RxD signalling for each port
  • USB bus powered or from an external power source (+9VDC to +36VDC)
  • Hot “Plug & Play” support, USB 2.0 full speed and USB 1.1 compliant
  • Standard COM ports full compatible
  • 15 KV ESD protection and HF filtering
  • Robust  & compact metal case, CE standards, cabinet or 35 mm Din Rail mounting
    Interfaces   2 or 4 RS232 / RS422 / RS485 asynchronous serial ports for USB 2.0    
    RS signals   RS232 mode : TxD, RxD, RTS, CTS, DCD, DTR, RI & GND RS422 mode : A, A’, B, B’ & GND - RS485 mode : AA’, BB’ & GND    
    Format   Asynchronous 5, 6, 7 or 8 bits per character 1, 11/2, 2 stop bits Even, odd, mark, space or no parity    
    Data rate   From 300 Kbps to 3 Mbps on each port    
    FIFOS   TX: 128 bytes, RX: 384 bytes on each port    
    Hand-shake   Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF) with automatic line direction control in the RS485 mode.    
    RS connectors   5-point screw-in terminal for each RS422/RS485 port, male SUB D9 connector for RS232    
    Protection   15KV ESD protection with HF signal filtering, CE standards    
    Isolation   1500Vrms optic isolation on RS422/RS485 serial ports    
    Signaling   2 LEDs per port to monitor TxD & RxD signals activity, one LED for power supply    
    Power supply   USB bus powered of from an external power source (+9 to +36VDC) on jack or Phoenix connector. USBPort/x enables to chain other USB devices and thus power other USB equipments from the product.    
    Operating systems     Windows 2000, 2003, XP, VISTA, SEVEN and Linux (please consult us for other OS)  
    Consumption   2.5W for the 2-port version, 3.5W for the 4-port version    
    Configuring   "Plug & Play" equipment, quick & easy Windows installation, RS232 / RS422 / RS485 mode, polarization and line termination are switches configurable    
    EMC   NF EN 55022 residential emission, NF EN 61000-6-2 industrial immunity    
    Environment   Operating temperature from -40°C to +70°C, storage -40°C to +80°C, 0 to 95% relative humidity without condensation    
    Installation   Metal case for panel mounting, 35 mm Din Rail mounting accessories available optionally    
    Dimensions   USBPort/2: 168 mm (L) x 112 mm (W) x 26 mm (H) USBPort/4: 168 mm (L) x 112 mm (W) x 42 mm (H)    
    Weight   445 g for the 2-port version, 610 g for the 4-port version    

USBPort

Acksys
 USBPort Isolated RS232-RS422-RS485 USB serial Hub

Código: USBPort/4

This new range of serial to USB solution (USBPort/x) offers performance, simplicity of installation, security, robustness and high reliability at affordable prices.
  • 2 or 4 ports 3-in-1 serial interface : RS232/RS4522/RS485 (1500V isolation)
  • Data rate from 300 Kbps to 3 Mbps on each port
  • RS485 automatic line direction control
  • Support for 4-wire RS422/RS485 and 2-wire RS485
  • Independent TxD & RxD signalling for each port
  • USB bus powered or from an external power source (+9VDC to +36VDC)
  • Hot “Plug & Play” support, USB 2.0 full speed and USB 1.1 compliant
  • Standard COM ports full compatible
  • 15 KV ESD protection and HF filtering
  • Robust  & compact metal case, CE standards, cabinet or 35 mm Din Rail mounting
    Interfaces   2 or 4 RS232 / RS422 / RS485 asynchronous serial ports for USB 2.0    
    RS signals   RS232 mode : TxD, RxD, RTS, CTS, DCD, DTR, RI & GND RS422 mode : A, A’, B, B’ & GND - RS485 mode : AA’, BB’ & GND    
    Format   Asynchronous 5, 6, 7 or 8 bits per character 1, 11/2, 2 stop bits Even, odd, mark, space or no parity    
    Data rate   From 300 Kbps to 3 Mbps on each port    
    FIFOS   TX: 128 bytes, RX: 384 bytes on each port    
    Hand-shake   Hardware hand-shake (RTS/CTS) and/or software hand-shake (XON/XOFF) with automatic line direction control in the RS485 mode.    
    RS connectors   5-point screw-in terminal for each RS422/RS485 port, male SUB D9 connector for RS232    
    Protection   15KV ESD protection with HF signal filtering, CE standards    
    Isolation   1500Vrms optic isolation on RS422/RS485 serial ports    
    Signaling   2 LEDs per port to monitor TxD & RxD signals activity, one LED for power supply    
    Power supply   USB bus powered of from an external power source (+9 to +36VDC) on jack or Phoenix connector. USBPort/x enables to chain other USB devices and thus power other USB equipments from the product.    
    Operating systems     Windows 2000, 2003, XP, VISTA, SEVEN and Linux (please consult us for other OS)  
    Consumption   2.5W for the 2-port version, 3.5W for the 4-port version    
    Configuring   "Plug & Play" equipment, quick & easy Windows installation, RS232 / RS422 / RS485 mode, polarization and line termination are switches configurable    
    EMC   NF EN 55022 residential emission, NF EN 61000-6-2 industrial immunity    
    Environment   Operating temperature from -40°C to +70°C, storage -40°C to +80°C, 0 to 95% relative humidity without condensation    
    Installation   Metal case for panel mounting, 35 mm Din Rail mounting accessories available optionally    
    Dimensions   USBPort/2: 168 mm (L) x 112 mm (W) x 26 mm (H) USBPort/4: 168 mm (L) x 112 mm (W) x 42 mm (H)    
    Weight   445 g for the 2-port version, 610 g for the 4-port version    

USBPort

Acksys
 AD400E RS232 -- RS422-RS485 converter

Código: AD400E

Designed to connect directly to PCs, this converter has a female SUB D9 connector to the RS232 port and a screw-in connecrting terminal for the RS-422/485 port.
  • Automatic RS485 self line turnaround
  • Self powered or powered from external source
  • Speed up to 1 Mbps
  • SUB D9 connector for RS232 port
  • Screw-in connecting terminal for RS422/485 port
  • Metal casing, CE standards
  • LED signal display
  • M.T.B.F. > 10e6 P.O.H.
    Conversion   RS232 to RS422 or RS485 with automatic (or software) RS485 turnaround, line polarisation and termination via miniature jumpers    
    Speed   Up to 1 Mbps    
    Connections   Female SUB D9 Connector for the RS232 port and a screw-in connecting terminal for the RS422/485    
    Signaling   TXD and RXD signal display on LEDs (only in external power mode)    
    Power   Internally powered via RS232 control signal (works is the DTR control signal is active and for signal level voltage > +3,7VDC) or externally (external power between +4,5VDC and +8VDC, symmetrical jack for left or right side connection - USB power cable included)    
    Fan-out   6 RS485 interfaces (internal power mode), 32 RS485 interfaces (external power)    
    Protections   HF filtering, DES IEC801-2 protection, level 4, max.15KV Surge protection by "Transient voltage suppressors", 0.3 KW 8/20 µS    
    Consumption   5.5 mA, 1 RS422 termination-free in internal power mode 60 mA, 32 RS485 interfaces with termination in external power mode    
    Environment   Operating Temperature between -30°C and +65°C Relative humidity 95% to +25°C    
    Dimensions   80.5 mm (L) x 31 mm (l) x 14.8 mm (H), 31 g    
    Accessories   Miniature screwdriver and USB power cable    
        

AD400E

Acksys
 AD400Ei RS232 -- RS422-RS485 isolated converter

Código: AD400Ei

Designed to connect directly to PCs, this converter has a female SUB D9 connector to the RS232 port and a screw-in connecting terminal for the RS-422/485 port.
  • Self RS485 line turn-around
  • 1500 Veff galvanic isolation
  • Speed up to 250 Kbps
  • SUB D9 connector for RS232 port
  • Screw-in terminal for RS422/485 port
  • Metal casing, CE standards
  • LED signal display
  • M.T.B.F. > 300.000 P.O.H.
    Conversion   RS232 to RS422 or RS485 with automatic (or software) RS485 turnaround, line polarization and termination via miniature jumpers    
    Speed   Up to 250 Kbps    
    Connections   Female SUB D9 connector to the RS232 port and a screw-in connecting terminal for the RS422/485    
    Signaling   TxD and RxD signal display on LEDs    
    Power   From an external source (external power between +4,7VDC and +5.5VDC, symmetrical jack for left or right side connection - USB power cable included), optional remote power supply    
    Fan-out   128 RS485 interfaces in homogenous network    
    Protections   HF Filtration, DES IEC801-2 protection, level 4, max. 15KV Surge protection by "transient voltage suppressors", 0.3 KW 8/20 µS, 1500 Veff galvanic isolation    
    Consumption   150 mA, 32 RS485 interfaces with termination (maximum)    
    Environment   Operating temperature between 0°C and +65°C Relative humidity 95% to +25°C    
    Dimensions   73 mm (L) x 31 mm (l) x 14.8 mm (H), 31 g.    
    Accessories   Miniature screwdriver and USB power cable    

AD400Ei

Acksys
 MI400e-RD RS232 -- RS422-RS485 fully isolated converter with self configuration and automatic line turn-around

Código: MI400e-RD

Thanks to the use of the latest technologies, the MI400e-RD series allows you to install easily and quickly your industrial RS422/RS485 network while making advantage of an increased reliability.
  • Self-configurable serial link parameters
  • Serial speed up to 2Mbps
  • Optional dual RS232 port in RS485 half-duplex mode
  • Automatic RS485 line turn-around
  • LED display easy RS signals monitiring & diagnostic
  • Din Rail, wall, case and rack universal mounting
  • AC or DC power supply (depending on models)
  • Connectors are compatible with the ACKSYS MI400 series, the RS422/485 screw-in terminal is compatible with the Westermo TM MA-45 & MD-45 products
  • Built-in continuous line surge protection, ESD protection, and lightening protection
  • Robust metal housing, CE standards
    Conversion   One serial RS232 port to one RS422/RS485 port with RS485 mode self line turn-around*, optional dual RS232 slave ports to the RS485 port mode.    
    Speed   From 50 bps to 2Mbps    
    Configuration   Serial link parameters self configuration (auto-RTS), no switches. Line polarization, termination, echo mode and selection between RS422/RS485 modes are configurable by mini-switches.    
    Connections   Male SUB D 9 connector on the RS232 side, 5 pins screw-in terminal on the RS422/485 side, compatible with the Westermo™ MA-45 & MD-45 products and the MI400-x series.    
    Signaling   LED display for TxD, RxD & RTS signals, power supply and RS422/485 line error.    
    Power supply   AC model works within the 85VAC to 264 VAC 47-440 Hz range and +100VDC to +370VDC (IEC-320 power cord), DC low voltage model works within the +9VDC to +36VDC range (screw-in terminal), consult us for extended power supply range.    
    Isolation   3 Kveff/1min opto-couplers line isolation, 4 Kveff/1min transformer power line isolation, DC 2 Kveff/1min isolation.    
    Fan-out   Up to 256 RS422 / RS485 tranceivers    
    Input load   1/8 UL RS485    
    EMI-RFI protection   Built-in continuous line surge protection (50 VCA), ESD protection (15 KVeff) and lightning protection (shock wave & residual effects).    
    EMC & Security   NF EN 55022 emission for residential environment, NF EN 61000-6-2 immunity for industrial environment, NF EN 60950 security.    
    Consumption   6VA for the AC model, 3,5W for the DC model    
    Environment   Operating temperature: from 0°C to +65°C Relative humidity: 95% at +25°C    
    Dimensions, weight   80 mm (L) x 90 mm (l) x 40 mm (H), 0.5 Kg AC model, 0.4 Kg DC model    
    Accessories   Accessories for din rail mounting and braces for wall and rack mounting delivered with all models    
   * Less than 15uS turn-around delay for speed < 48 Kbps, 2 bits duration turn-around delay for speed > 48 Kbps  

MI400e-RD

Acksys
 MI400e-RD RS232 -- RS422-RS485 fully isolated converter with self configuration and automatic line turn-around

Código: MI400e-RD-DC

Thanks to the use of the latest technologies, the MI400e-RD series allows you to install easily and quickly your industrial RS422/RS485 network while making advantage of an increased reliability.
  • Self-configurable serial link parameters
  • Serial speed up to 2Mbps
  • Optional dual RS232 port in RS485 half-duplex mode
  • Automatic RS485 line turn-around
  • LED display easy RS signals monitiring & diagnostic
  • Din Rail, wall, case and rack universal mounting
  • AC or DC power supply (depending on models)
  • Connectors are compatible with the ACKSYS MI400 series, the RS422/485 screw-in terminal is compatible with the Westermo TM MA-45 & MD-45 products
  • Built-in continuous line surge protection, ESD protection, and lightening protection
  • Robust metal housing, CE standards
    Conversion   One serial RS232 port to one RS422/RS485 port with RS485 mode self line turn-around*, optional dual RS232 slave ports to the RS485 port mode.    
    Speed   From 50 bps to 2Mbps    
    Configuration   Serial link parameters self configuration (auto-RTS), no switches. Line polarization, termination, echo mode and selection between RS422/RS485 modes are configurable by mini-switches.    
    Connections   Male SUB D 9 connector on the RS232 side, 5 pins screw-in terminal on the RS422/485 side, compatible with the Westermo™ MA-45 & MD-45 products and the MI400-x series.    
    Signaling   LED display for TxD, RxD & RTS signals, power supply and RS422/485 line error.    
    Power supply   AC model works within the 85VAC to 264 VAC 47-440 Hz range and +100VDC to +370VDC (IEC-320 power cord), DC low voltage model works within the +9VDC to +36VDC range (screw-in terminal), consult us for extended power supply range.    
    Isolation   3 Kveff/1min opto-couplers line isolation, 4 Kveff/1min transformer power line isolation, DC 2 Kveff/1min isolation.    
    Fan-out   Up to 256 RS422 / RS485 tranceivers    
    Input load   1/8 UL RS485    
    EMI-RFI protection   Built-in continuous line surge protection (50 VCA), ESD protection (15 KVeff) and lightning protection (shock wave & residual effects).    
    EMC & Security   NF EN 55022 emission for residential environment, NF EN 61000-6-2 immunity for industrial environment, NF EN 60950 security.    
    Consumption   6VA for the AC model, 3,5W for the DC model    
    Environment   Operating temperature: from 0°C to +65°C Relative humidity: 95% at +25°C    
    Dimensions, weight   80 mm (L) x 90 mm (l) x 40 mm (H), 0.5 Kg AC model, 0.4 Kg DC model    
    Accessories   Accessories for din rail mounting and braces for wall and rack mounting delivered with all models    
   * Less than 15uS turn-around delay for speed < 48 Kbps, 2 bits duration turn-around delay for speed > 48 Kbps  

MI400e-RD

Acksys
 RD400-24V RS232-RS422-485 Converter for rail DIN assembly

Código: RD400

  • Maximum speed. 115,2 Kbps (self RS485 line turn around up to 56 kbps)
  • 2 screw-in connectors (8 points on RS232 side, 6 points on RS422/RS485 side)
  • 24V power supply
  • Line surge protection and line ESD protection

RD400-24V

Acksys
 AD-Bdc-M

Código: ADBdC-M

  • Maximum speed. 19,2 Kbps
  • Self-powered by DTR, RTS and Tx signals
  • Possible 12V external power supply (for active mode)
  • SUB 25 points male connector on RS232 side, 5 points screw-in on current loop side
  • Up to 3 interfaces in the current loop on active mode
  • 2500 Veff galvanic isolation
  • Line surge protection, line ESD protection and polarity inversion

AD-Bdc-M

Acksys
 MI-Bdc High performance RS232-Current loop opto-isolated Converters

Código: MIBdC

  • Maximum speed. 56 Kbps
  • SUB 9 points male on RS232 side, 5 points screw-in on current loop side
  • Independant configuration of out and in loops (passive or activve mode)
  • Flexibility of control signals management
  • Up to 8 periphericals in the loop in active mode
  • Line surge protection and line ESD protection

MI-Bdc

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X