Soluciones de fibra ópttica Acksys
Acksys

Soluciones de fibra ópttica Acksys


Soluciones de fibra ópttica Acksys


Acksys
 RD300-OF

Código: RD300-OF

Using fiber optic enables to use a higher communication bandwidth while offering a total immunity against EMI/RFI interferences and an increased security as well.
  • 3 in 1 built-in serial interface : RS232/RS422/RS485
  • Serial link up to 2 Mbps for RS422 & RS485 mode, 1 Mbps for RS232 mode
  • Reliable error free communication even in case of EMI/RFI pertubations
  • Fiber length up to 5000 m (100/140 µm fiber type), ST type connectors
  • Automatic RS485 line turn-around, software independent
  • Half-duplex & Full-duplex bidirectionnal data transmission
  • Activity LED for fiber and copper TxD & RxD signals, error LED in case of fiber breakdown
  • Wide DC power range, from +9VDC to +36VDC
  • Point to point mode
  • 15 KV ESD protection and HF filtering on the copper side
  • Robust & compact metal case, CE standards, 35 mm Din Rail mounting
    Conversion   Serial RS232/RS422/RS485 to multimode fiber optic, RS485 mode self line turnaround    
    Serial speed   2Mbps for RS422/RS485 mode, 1Mbps for RS232 mode    
    Distance   5000m with a 100/140 µm fiber type at 25°C    
    Serial protocols   The device supports any kind of communication protocols (Modbus, Unitelway, Profibus, DH+ and any ASCII or binary serial protocols ...)    
    Configuration   Serial link parameters auto configuration, no switches. Line polarization, termination and selection between RS232/RS422/RS485 modes are configurable by mini-switches.    
    Serial connectors   Pluggable screw-in terminal, TxD & RxD signal for RS232 mode, TxA, RxA, TxB, RxB for RS422 mode, TRxA & TRxB for RS485 mode    
    Optic fiber   50/125 µm, 62.5/125 µm, 100/140 µm, 820 nm wave length, selectable ON/OFF state of the fiber light at the idle state.    
    Power budget   22.4 dB, 5 dB & 11 dB attenuator for short distance communication    
    Fiber connectors   2 ST connectors    
    Network topologies   Point to point, ring    
    Signaling   2 LEDs Tx/Rx for copper 2 LEDs Tx/Rx for fiber optic n°1 1 LED for fiber n°1 breakdown 1 LED for power    
    Fan-out   31 RS485 interfaces, 10 RS422 interfaces     
    Input load   Input load 1/8 UL in RS485 mode     
    EMI/RFI protection   Built-in continuous line surge protection, ESD protection (15 KVeff), HF filtering    
    Isolation   Infinite galvanic isolation through the optic fiber    
    CEM   NF EN 55022 emission, NF EN 61000-6-2 immunity    
    Security   Fiber breakdown self diagnostic, failure is reported on a LED and a relay contact (MOSFET) is activated.    
    Power supply   +9VDC to +36VDC (pluggable screw-in terminal), 2.1W    
    Environment   Temperature from -5°C to +65°C, storage -40°C to +80°C, relative humidity from 0 to 95% RH without condensation    
    Dimensions, weight   107 mm (L) x 88 mm (l) x 25 mm (H), 260 g    

RD300-OF

Acksys
 RD300-OFR Universal serial RS232-RS422-RS485 to multimode optic fiber media converter (4 ST type connectors )

Código: RD300-OFR

Using fiber optic enables to use a higher communication bandwidth while offering a total immunity against EMI/RFI interferences and an increased security as well.
  • 3 in 1 built-in serial interface : RS232/RS422/RS485
  • Serial link up to 2 Mbps for RS422 & RS485 mode, 1 Mbps for RS232 mode
  • Reliable error free communication even in case of EMI/RFI pertubations
  • Fiber length up to 5000 m (100/140 µm fiber type), ST type connectors
  • Automatic RS485 line turn-around, software independent
  • Half-duplex & Full-duplex bidirectionnal data transmission
  • Activity LED for fiber and copper TxD & RxD signals, error LED in case of fiber breakdown
  • Wide DC power range, from +9VDC to +36VDC
  • Point to point mode and multipoint redundant mode (fault tolerant for the RD300-OFR model)
  • 15 KV ESD protection and HF filtering on the copper side
  • Robust & compact metal case, CE standards, 35 mm Din Rail mounting
    Conversion   Serial RS232/RS422/RS485 to multimode fiber optic, RS485 mode self line turnaround    
    Serial speed   2Mbps for RS422/RS485 mode, 1Mbps for RS232 mode    
    Distance   5000m with a 100/140 µm fiber type at 25°C    
    Serial protocols   The device supports any kind of communication protocols (Modbus, Unitelway, Profibus, DH+ and any ASCII or binary serial protocols ...)    
    Configuration   Serial link parameters auto configuration, no switches. Line polarization, termination and selection between RS232/RS422/RS485 modes are configurable by mini-switches.    
    Serial connectors   Pluggable screw-in terminal, TxD & RxD signal for RS232 mode, TxA, RxA, TxB, RxB for RS422 mode, TRxA & TRxB for RS485 mode    
    Optic fiber   50/125 µm, 62.5/125 µm, 100/140 µm, 820 nm wave length, selectable ON/OFF state of the fiber light at the idle state.    
    Power budget   22.4 dB, 5 dB & 11 dB attenuator for short distance communication    
    Fiber connectors   4 ST connectors    
    Network topologies   Point to point, ring, single-master & dual-master, redundant fiber ring, dual ring & dual master, dual point to point, star    
    Signaling   2 LEDs Tx/Rx for copper 2 LEDs Tx/Rx for fiber optic n°1 2 LEDs Tx/Rx for fiber optic n°2 1 LED for fiber n°1 breakdown 1 LED for fiber n°2 breakdown 1 LED for power    
    Fan-out   31 RS485 interfaces, 10 RS422 interfaces    
    Input load   Input load 1/8 UL in RS485 mode    
    EMI/RFI protection   Built-in continuous line surge protection, ESD protection (15 KVeff), HF filtering    
    Isolation   Infinite galvanic isolation through the optic fiber    
    CEM   NF EN 55022 emission, NF EN 61000-6-2 immunity    
    Security   Fiber breakdown self diagnostic, failure is reported on a LED and a relay contact (MOSFET) is activated.    
    Power supply   +9VDC to +36VDC (pluggable screw-in terminal), 2.3W    
    Environment   Temperature from -5°C to +65°C, storage -40°C to +80°C, relative humidity from 0 to 95% RH without condensation    
    Dimensions, weight   107 mm (L) x 88 mm (l) x 25 mm (H), 260 g    

RD300-OFR

Acksys
 RD320-OF Universal serial RS232-RS422-RS485 to single-mode optic fiber media converter (2 SC type connectors )

Código: RD320-OF

Using fiber optic enables to use a higher communication bandwidth while offering a total immunity against EMI/RFI interferences and an increased security as well.
  • 3 in 1 built-in serial interface : RS232/RS422/RS485, speed up to 500 Kbps (RS232), 2 Mbps (RS422/485)
  • Reliable error free communication even in case of EMI/RFI pertubations
  • Fiber length up to 20 Km (9/125 µm fiber type), SC type connectors
  • Automatic RS485 line turn-around, software independent
  • Half-duplex & Full-duplex bidirectionnal data transmission
  • Activity LED for fiber and copper TxD & RxD signals, error LED in case of fiber breakdown
  • Wide DC power range, from +9VDC to +36VDC
  • Point to point mode
  • 15 KV ESD protection and HF filtering on the copper side
  • Robust & compact metal case, CE standards, 35 mm Din Rail mounting
    Conversion   Serial RS232/RS422/RS485 to single-mode fiber optic, RS485 mode self line turnaround    
    Serial speed   500 Kbps for RS232 mode, 2Mbps for RS422/RS485 mode    
    Distance   20 Km with a 9/125 µm fiber type at 25°C    
    Serial protocols   The device supports any kind of communication protocols (Modbus, Unitelway, Profibus, DH+ and any ASCII or binary serial protocols ...)    
    Configuration   Serial link parameters auto configuration, no switches. Line polarization, termination and selection between RS232/RS422/RS485 modes are configurable by mini-switches.    
    Serial connectors   Pluggable screw-in terminal, TxD & RxD signal for RS232 mode, TxA, RxA, TxB, RxB for RS422 mode, TRxA & TRxB for RS485 mode    
    Optic fiber   9/125 µm fiber support, 1310 nm wave length    
    Power budget   16 dB (typical)    
    Fiber connectors   2 SC connectors    
    Network topologies   Point to point, ring    
    Signaling   2 LEDs Tx/Rx for copper 2 LEDs Tx/Rx for fiber optic n°1 1 LED for fiber n°1 breakdown 1 LED for power    
    Fan-out   31 RS485 interfaces, 10 RS422 interfaces    
    Input load   Input load 1/8 UL in RS485 mode    
    EMI/RFI protection   Built-in continuous line surge protection, ESD protection (15 KVeff), HF filtering    
    Isolation   Infinite galvanic isolation through the optic fiber    
    CEM   NF EN 55022 emission, NF EN 61000-6-2 immunity    
    Security   Fiber breakdown self diagnostic, failure is reported on a LED and a relay contact (MOSFET) is activated.    
    Power supply   +9VDC to +36VDC (pluggable screw-in terminal), 2.5W    
    Environment   Temperature from -5°C to +65°C, storage -40°C to +80°C, relative humidity from 0 to 95% RH without condensation    
    Dimensions, weight   107 mm (L) x 88 mm (l) x 25 mm (H), 260 g    

RD320-OF

Acksys
 RD320-OFR Universal serial RS232-RS422-RS485 to single-mode optic fiber media converter (4 SC type connectors )

Código: RD320-OFR

Using fiber optic enables to use a higher communication bandwidth while offering a total immunity against EMI/RFI interferences and an increased security as well.
  • 3 in 1 built-in serial interface : RS232/RS422/RS485, speed up to 500 Kbps (RS232), 2 Mbps (RS422/485)
  • Reliable error free communication even in case of EMI/RFI pertubations
  • Fiber length up to 20 Km (9/125 µm fiber type), SC type connectors
  • Automatic RS485 line turn-around, software independent
  • Half-duplex & Full-duplex bidirectionnal data transmission
  • Activity LED for fiber and copper TxD & RxD signals, error LED in case of fiber breakdown
  • Wide DC power range, from +9VDC to +36VDC
  • Point to point mode and multipoint redundant mode
  • 15 KV ESD protection and HF filtering on the copper side
  • Robust & compact metal case, CE standards, 35 mm Din Rail mounting
    Conversion   Serial RS232/RS422/RS485 to single-mode fiber optic, RS485 mode self line turnaround    
    Serial speed   500 Kbps for RS232 mode, 2Mbps for RS422/RS485 mode    
    Distance   20 Km with a 9/125 µm fiber type at 25°C    
    Serial protocols   The device supports any kind of communication protocols (Modbus, Unitelway, Profibus, DH+ and any ASCII or binary serial protocols ...)    
    Configuration   Serial link parameters auto configuration, no switches. Line polarization, termination and selection between RS232/RS422/RS485 modes are configurable by mini-switches.    
    Serial connectors   Pluggable screw-in terminal, TxD & RxD signal for RS232 mode, TxA, RxA, TxB, RxB for RS422 mode, TRxA & TRxB for RS485 mode    
    Optic fiber   9/125 µm fiber support, 1310 nm wave length    
    Power budget   16 dB (typical)    
    Fiber connectors   4 SC connectors    
    Network topologies   Point to point, ring, single-master & dual-master, redundant fiber ring, dual ring & dual master, dual point to point, star    
    Signaling   2 LEDs Tx/Rx for copper 2 LEDs Tx/Rx for fiber optic n°1 2 LEDs Tx/Rx for fiber optic n°2 1 LED for fiber n°1 breakdown 1 LED for fiber n°2 breakdown 1 LED for power    
    Fan-out   31 RS485 interfaces, 10 RS422 interfaces    
    Input load   Input load 1/8 UL in RS485 mode    
    EMI/RFI protection   Built-in continuous line surge protection, ESD protection (15 KVeff), HF filtering    
    Isolation   Infinite galvanic isolation through the optic fiber    
    CEM   NF EN 55022 emission, NF EN 61000-6-2 immunity    
    Security   Fiber breakdown self diagnostic, failure is reported on a LED and a relay contact (MOSFET) is activated.    
    Power supply   +9VDC to +36VDC (pluggable screw-in terminal), 3.9W    
    Environment   Temperature from -5°C to +65°C, storage -40°C to +80°C, relative humidity from 0 to 95% RH without condensation    
    Dimensions, weight   107 mm (L) x 88 mm (l) x 25 mm (H), 260 g    

RD320-OFR

Acksys
 AD422-OF-M

Código: AD422-OF-M

  • Maximum speed. 5 Mbps
  • External power supply or by pin 9 of RS422 connector (+5VDC to +15VDC)
  • SUB D 25 male connector on RS422 side, TX, RX type ST connector on optical fiber side
  • Line surge protection and line ESD protection

AD422-OF-M

Acksys
 AD232-OFP

Código: AD232-OFP-F

  • Maximum speed: 38,4 Kbps, TxD & RxD signals
  • Self powered (serial port) or by pin 9 of the RS232 connector (+5VDC to +15VDC)
  • SUB 25 points, female on RS232 side
  • Line surge protection and line ESD protection

AD232-OFP

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X