Pasarelas de comunicación industrial Anybus
Anybus

Pasarelas de comunicación industrial Anybus


Pasarelas de comunicación industrial Anybus


Anybus
 Anybus Communicator PROFINET

Código: AB7013

Integrate your serial RS-232/422/485 based industrial devices and equipment to a PROFINET control system without the need for any changes to the device. Just connect, configure and you're done!
  • Saves machine builders and device manufacturers of integrating a PROFINET interface
  • Allows system integrators to retro-fit older automation devices into modern PROFINET communication structures
  • Requires no hardware or software changes to be made to the connected device
  • Compatible with all PLCs with PROFINET support
  • Performs complete serial protocol conversion, no PLC function blocks required
  • Intelligent I/O data mapping within the Communicator permits even devices with slow serial communication can be integrated without any restrictions to the upper network  
  • Possibility to connect upto 31 nodes via one Communicator giving inexpensive PROFINET network connectivity for your devices
  • Integrated Email client, FTP server and embedded webserver for diagnostics and data visualization 
  • Always free technical support from HMS and our global Anybus Distributors
Dimensions  (L•W•H)120 x 75 x 27mm or 4,72 x 2,95 x 1,06"                                        
Weight150g or 0,33 lbs 
Operating temperature0 to +55 °C  or  0 to +131 °F  
Storage temperature -40 to +85 °C  or  -40 to +185 °F  
Power supply24 VDC  
Current consumption max. 200mA (Typical 100mA)  
Serial application InterfaceSelectable RS-232, RS-422, RS-485 
Max stations  31 nodes via RS-422 or RS-485  
Galvanic isolation On both serial and BUS/Ethernet side  
Mechanical ratingIP20, NEMA rating 1 
MountingDIN-rail (EN 50022 standard) 
Protocol: Modbus RTU  Modbus RTU Master - Request/Response               
Protocol: ASCII/Vendor SpecificRequest/Response or Produce/Consume     
Protocol: Rockwell DF1DF1 Master  
CertificationsCE, CULUS, ATEX/Haz.Loc 

Anybus Communicator - PROFINET

Anybus
 x-gateway-asi-cops

Código: AB7827

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and CANopen networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - CANopen Slave

Anybus
 Anybus X-gateway AS-Interface Master - CC-Link Slave

Código: AB7830

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and CC-Link networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - CC-Link Slave

Anybus
 x-gateway-asi-cnts

Código: AB7823

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and ControlNet networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - ControlNet Adapter

Anybus
 x-gateway-asi-devs

Código: AB7822

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and DeviceNet networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - DeviceNet Adapter

Anybus
 x-gateway-asi-ects

Código: AB7698

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and EtherCAT networks.
  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Powerful Master interface eliminates the need for a PLC controller on the AS-Interface network
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - EtherCAT Slave

Anybus
 x-gateway-asi-eips

Código: AB7820

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and EtherNet/IP networks.
  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Powerful Master interface eliminates the need for a PLC controller on the AS-Interface network
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - EtherNet/IP Adapter

Anybus
 x-gateway-asi-fip

Código: AB7824

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and FIPIO networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - FIPIO Slave

Anybus
 x-gateway-asi-intcu

Código: AB7825

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and Interbus networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - Interbus CU Slave

Anybus
 x-gateway-asi-intfo

Código: AB7826

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and Interbus Fiber Optic networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - Interbus F.Optic Slave

Anybus
 x-gateway-asi-mbp

Código: AB7829

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and Modbus Plus networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - Modbus Plus Slave

Anybus
 x-gateway-asi-mbrtu

Código: AB7828

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and Modbus RTU networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - Modbus RTU Slave

Anybus
 x-gateway-asi-mbtcp

Código: AB7631

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and Modbus TCP networks.
  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Powerful Master interface eliminates the need for a PLC controller on the AS-Interface network
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - ModbusTCP Server

Anybus
 x-gateway-asi-pdps

Código: AB7821

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and PROFIBUS networks.
  • Fast copying of cyclic I/O data between two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Powerful Master interface for AS-Interface eliminates the need for a PLC controller
  • Optional control and status information added to the I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - PROFIBUS Slave

Anybus
 x-gateway-asi-prts

Código: AB7648

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between AS-Interface and PROFINET networks.
  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Powerful Master interface eliminates the need for a PLC controller on the AS-Interface network
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
Dimensions (L•W•H)  114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight400g or 0,880 lbs
Operating temperature-25 to +65 °C  or  -13 to +149 °F 
Storage temperature-40 to +85 °C  or  -40 to +185 °F 
Power supply24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption    max. 400mA (Typical 200mA)
Enclosure material Aluminium and plastic
Installation positionVertical / Flat*
Galvanic isolationYES, on both BUS/Ethernet side
Mechanical ratingIP20, NEMA rating 1
MountingDIN-rail (EN 50022 standard)
I/O configurationvia USB port with Anybus Configuration Manager software
CertificationsCE, CULUS, ATEX/Haz.Loc

Anybus X-gateway - AS-Interface Master - PROFINET-IO Device

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X