Pasarelas de comunicación industrial PAPOUCH
PAPOUCH

Pasarelas de comunicación industrial PAPOUCH


Pasarelas de comunicación industrial PAPOUCH


PAPOUCH
 Wie232 - Wiegand converter to RS232

Código: WIE232

Wiegand is a standard interface used in contactless card readers. Wie232 is able to convert the Wiegand interface to a format usable by a standard serial port (RS232). Thus, standard contactless card readers can be easily connected to a PC or similar syst
    null

Wie232

PAPOUCH
 CQ485 - RS485-422 repeater and isolator

Código: CQ485

CQ485 is an RS485 and RS422 repeater, converter and isolator in one device. Both sides are galvanically isolated. Communication speed up to 921.6 kBd. Easy setup software included. Configuration via USB interface.
  • Complete galvanic isolation (including the GND) of both lines from each other and from power circuits
  • Second galvanic isolation of both lines from power GND (optional)
  • Complete signal reconstruction (depending on the mode)
  • The RS485/422 line (including the grounding) is completely isolated from USB and from the power supply (this isolation is provided as standard for all types)
  • Optionally, second galvanic isolation of both lines from the power supply ground.
  • Transmission speed up to 921,6 kBd
  • Enhanced overvoltage protection for both lines.
  • Automatic direction control with no delay.
  • Wide range of the power voltage
  • Easy setting using supplied software (or via terminal) over a USB interface (new).
  • Easy installation. 
  • Adjustable termination including resistors defining the idle state of the line.
  • All signals connected via a slip-on terminal.
  • Rugged metal enclosure with optional DIN rail holder

CQ485

PAPOUCH
 TCP2RTU RS485 version

Código: TCP2RTU_RS485

TCP2RTU is a transparent both directions converter of the MODBUS TCP protocol, running over Ethernet, into the MODBUS RTU/ASCII protocol, running over RS232, RS485 and RS422 lines. TCP2RTU works both directions since version 1.4. Either as a Modbus gatewa
  • MODBUS TCP: 10/100 Mbit Ethernet
  • MODBUS RTU: RS232, RS485 or RS422
  • Transparent conversion of MODBUS TCP to MODBUS RTU or ASCII.
  • MODBUS RTU/ASCII over RS485, RS422 or RS232.
  • Two communication sockets on one Modbus Port.
  • One port for RAW data communication (Ethernet to RSxxx converter).
  • Configuration: Internal web pages or via Telnet.
  • Power supply range: 8 - 30 V DC
  • TCP2RTU works both directions since version 1.4. Either as a Modbus gateway (Master) or as a Modbus Slave.
  • This product has been manufactured by Papouch s.r.o. Both hardware and firmware can be modified to suit your needs.

TCP2RTU

PAPOUCH
 GNOME232 - Ethernet to RS232 converter

Código: GNOME232

Inexpensive 10/100 Ethernet to RS232 converter. Suitable for extending the RS232 serial line over the Ethernet. Virtual serial port. Power supply ranging from 4.5 up to 75V. Protocols: TCP/IP, UDP. Configuration via web interface.
  • Two-way conversion of Ethernet to RS232
  • Connection to 10/100Base-T Ethernet via RJ45 connector
  • RS232 line terminated in D-SUB 9M (Canon 9 plug – the same connector as on PC). (We offer the GNOME232F converter, which is equipped with reverse connector.)
  • Speed RS232 300 Bd to 460 kBd
  • Used signals: RXD, TXD, RTS, CTS, DTR, GND
  • Data flow control: RTS/CTS or Xon/Xoff or no control
  • Secured against unauthorized access
  • Possibility to supply connected devices from the DTR signal
  • Various power supply ranges: 4.5 to 75 V (adapter not included in the delivery package)
  • Version with galvanically isolated power supply 36 to 75 V to be used, for example, in telecommunications (power supply -48V)
  • Indication of power supply, data transmission, network connection and activity
  • This product has been manufactured by Papouch s.r.o. Both hardware and firmware can be modified to suit your needs.

GNOME232

PAPOUCH
 Wie485 - Wiegand converter to RS485

Código: WIE485

Wiegand is a standard interface used in contactless card readers. Wiegand to RS485 bidirectional interface converter. Thus, standard contactless card readers can be easily connected to a PC or similar system wia RS485 interface.
    null

Wie485

PAPOUCH
 GNOME485 - Ethernet to RS485 converter

Código: GNOME485

Inexpensive Ethernet - RS485 converter. Enables a device with RS485 to easily connect to the Ethernet or to extend the RS485 line via the Ethernet. Power supply 5 to 30V. Virtual COM port. Protocols: TCP/IP, UDP.
  • Ethernet to RS485 line conversion
  • Connection to 10/100Base-T Ethernet via RJ45 connector
  • RS485 connected via a slip-on bus bar
  • Data transmission speed 300 Bd to 460 kBd
  • Used signals: RxTx+, RxTx- (or A, B)
  • RS485 protection against overvoltage
  • Automatic direction switching
  • Secured against unauthorized access
  • Power supply range: 5 to 72V
  • Indication of power supply, data transmission, network connection and activity
  • Mountable to DIN rail
  • This product has been manufactured by Papouch s.r.o. Both hardware and firmware can be modified to suit your needs.

GNOME485

PAPOUCH
 GNOME422 - Ethernet to RS422 converter

Código: GNOME422

GNOME422 is a simple Ethernet to RS422 converter. It enables a device with RS422 to easily connect to the Ethernet, to extend the RS422 line via the Ethernet or to establish a network of RS422 via the Ethernet. Power supply 5 to 30V. Virtual serial port.
  • Ethernet to RS422 line conversion
  • Connection to 10/100Base-T Ethernet via RJ45 connector
  • RS422 connected via a slip-on bus bar
  • Data transmission speed 300 Bd to 460 kBd
  • Used signals: Rx+, Rx-, Tx+, Tx-
  • RS422 protection against overvoltage
  • Secured against unauthorized access
  • Power supply range: 5 to 72V
  • Indication of power supply, data transmission, network connection and activity
  • Mountable to DIN rail
  • This product has been manufactured by Papouch s.r.o. Both hardware and firmware can be modified to suit your needs.

GNOME422

PAPOUCH
 GNOME232 TTL - LAN to RS232 in TTL levels converter

Código: GNOME232_TTL

Serial line converter with TTL levels to the Ethernet. Allows you to easily connect a device with a serial interface to the network. GNOME232 TTL comes unboxed and is particularly suitable for installation in existing facilities.
    null

GNOME232TTL

PAPOUCH
 SW485 - Splitter - extender od RS485

Código: SW485

A device for the interconnection of RS485 terminal blocks (bus bars). SW485 enables up to nine RS485 terminal blocks to be connected in a star topology. All the lines are equal. When data are received by any line, they are sent to all the other lines.
  • A device for proper interconnection of up to nine RS485 lines (enables a star topology, which is not usually allowed for RS485).
  • Logical processing of all signals.
  • Signal transmission with minimum delay - only 130 ns.
  • Maximum communication speed of RS485 lines: 1.5 Mbps
  • Possibility to configure the switching delay for automatic change of data flow direction (7 µs to 1.9 ms in several increments)
  • User-configurable connection of terminating resistors and bias resistors defining the idle state of the line. These resistors may be connected separately for each individual line.
  • Mountable to a wall or DIN 35 mm rail.
  • Supply voltage 7 to 30 V DC.

SW485

PAPOUCH
 SB232 - USB to RS232 converter

Código: SB232_1

Isolated industrial USB to RS232 converter. Easy installation: A virtual COM port is created on your Windows PC. Easily usable also in Linux OS.
    null

SB232

PAPOUCH
 SB485 - USB to RS485-422 converter

Código: SB485S_1

Robust industrial and isolated USB to RS485, RS422 and RS422 multimaster (multidrop) converter. Allows you to simply install a virtual COM port on your Windows PC.
    null

SB485

PAPOUCH
 SB485L - Basic USB to RS485 Converter

Código: SB485L

The basic version of USB to RS485 converter. Galvanic isolation, small size, fixed communication parameters.
    null

SB485L

PAPOUCH
 QuidoDuplex RS - Extender of digital I-Os_ RS485

Código: QUIDO_DUP_RS_4_1

QuidoDuplex RS is a set of two I/O modules for RS485 line (two wires only) with a special firmware designed specificaly to transmit digital I/Os over RS485 line as an autonomous system - no PCs or PLCs needed. If one input is turned on, the corresponding
  • Digital two state signals are transmitted from one to the other and also the other way via RS232 or RS485.
  • Maximum workung distance 1200 meters when using RS485 line (more with repeaters)
  • Wide power voltage range: 8(12) to 30 V DC.
  • Set consists of two I/O modules Quido RS 4/4 (or 8/8) with special firmware.
  • (power supply units not included, sold separately)

QuidoDuplex RS

PAPOUCH
 QuidoDuplex ETH - Extender of digital I-Os_ Ethernet

Código: QUIDO_DUP_ETH_4_1

QuidoDuplex ETH is a set of two I/O modules for Ethernet (LAN, computer network) with a special firmware designed specificaly to transmit digital I/Os over Ethernet as an autonomous system - no PCs or PLCs needed. If one input is turned on, the correspond
    null

QuidoDuplex ETH

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X