Sensores termómetros, higrómetros, anemómetros PAPOUCH
PAPOUCH

Sensores termómetros, higrómetros, anemómetros PAPOUCH


Sensores termómetros, higrómetros, anemómetros PAPOUCH


PAPOUCH
 THT2 - Intelligent RS485 sensor

Código: THT2

Main module for digital sensors of temperature and humidity with dew point calculation. Communicaters via RS485 line - up to 1.2Km. Metal enclosure, detachable sensor (not included, sold separately).
  • Measures relative humidity in range 0 % to 100 % (with proper sensor connected)
  • Measures temperature in range -40°C to +123,8 °C (with proper sensor connected)
  • Calculates dew point
  • Calulates temperatures in several units (°C, °F, K)
  • Extreme values memory – THT2 saves maximum and minimum measured-out valu of each quantity.
  • Compatible sensors: temperature and humidity or temperature only (sensor is sold separately)
  • RS485 communication
  • Spinel and ModBus RTU protocols are supported
  • ultra low power consumption design
  • unstabilised power compatible
  • PC software: Wix
  • Connection to PC: Any RS485 converter.
    Tip: There is also sensor like THT2 that connects directly to Ethernet - TH2E.

THT2

PAPOUCH
 papago-2th-thermometer-and-humidity-to-wifi

Código: PGO_2TH_W_EU

Two combined sensors with WiFi interface. It measures only temperature or temperature, humidity and dew point. Temperatures measured in the range from -55 to +125 °C.
  • Measures two external sensors (sensors are not included). It is possible to connect either a temperature sensor or combined sensor for temperature, humidity and dew point.
  • Combined sensor: temperature (-40 to +123,8 °C), humidity (0 to 100 %) and dew point
  • Temperature sensor: temperature (-55 to +125 °C)
  • Measurements per second: 1, 2 or 5 according to the settings
  • WiFi 2,4 GHz (IEEE 802.11 b/g and IEEE 802.11n (one stream), IEEE 802.11 d/h/i/j/k/w/r)
  • Network and WiFi parameters configurable via USB (microUSB connector).
  • Antenna: SMA RP
  • External power supply 11 to 58 V DC
  • Typical power consumption 1.8 W
  • Package contents: Papago 2TH WIFI, small antenna, mini USB cable, power adaptor 15V/0,8A)

Papago 2TH WIFI

PAPOUCH
 2pt-eth-celoeth_v

Código: PGO_2PT_W_EU

Thermometer for Pt100 or Pt1000 with two inputs and WiFi interface; high electrical precision of 0.01°C, temperature range from -200 to +850°C (according to the connected sensor).
  • Measures two external sensors Pt100 or Pt1000 (sensors are not included; you can use any standard sensor Pt100/1000; a basic sensor for -90 to +250°C is available on our website here)
  • Range 1: -200 to +850°C, increment 0.1°C
  • Range 2: -200 to +400°C, increment 0.01°C
  • Measurements per second: 1, 2 or 5 according to the settings
  • Connection method: 2, 3 or 4-wire
  • Field current 100, 250, 500, 750 or 1000 μA
  • Both sensors connected to a removable screw terminal block
  • WiFi 2,4 GHz (IEEE 802.11 b/g and IEEE 802.11n (one stream), IEEE 802.11 d/h/i/j/k/w/r)
  • Network and WiFi parameters configurable via USB (microUSB connector)
  • Antenna: SMA RP
  • External power supply 11 to 58 V DC
  • Typical power consumption 1.8 W
  • Package contents: Papago 2PT WIFI, small antenna, mini USB cable, power adaptor 15V/0,8A)

Papago 2PT WIFI

PAPOUCH
 papago-2tc-thermocouple-to-wifi

Código: PGO_2TC_W_EU

Thermometer for thermocouples of type K with two inputs and WiFi interface. The accuracy depends on the thermocouple. Measuring range -50 to +1350 °C.
  • Measures two external thermocouples of type K (sensors are not included)
  • Range: -50 to +1350°C, increment 0.1°C
  • Measurements per second: 1, 2 or 5 according to the settings
  • Connection of the two sensors by standard thermocouple connector
  • WiFi 2,4 GHz (IEEE 802.11 b/g and IEEE 802.11n (one stream), IEEE 802.11 d/h/i/j/k/w/r)
  • Network and WiFi parameters configurable via USB (microUSB connector).
  • Antenna: SMA RP
  • External power supply 11 to 58 V DC
  • Typical power consumption 1.8 W
  • Package contents: Papago 2TC WIFI, small antenna, mini USB cable, power adaptor 15V/0,8A)

Papago 2TC WiFi

PAPOUCH
 Pt100 for -90 to +250 °C_ metal rod

Código: SNS_PT100-90-250

Pt100 sensor in a metal rod. 4 mm in diameter for a temperature range of -90 to +250°C. Teflon cable 3 m.
    null

Pt100

PAPOUCH
 UC232 - RS232 Isolator

Código: UC232

UC232 is a complete RS232 isolator of all signals. It protects your PC, notebook or a different device against ground loops and overvoltage.
  • Complete galvanic isolation of RS232
  • Overvoltage protection
  • All RS232 signals are transferred and isolated (DCD, DSR, RXD, RTS, TXD, CTS, DTR, RI, GND)
  • Communication speed up to 460 kBd.
  • D-SUB 9 connectors (Cannon 9). UC232 connects to PC via a standard cable. Isolated port is a standard D-SUB 9 as PC COM port.
  • Power voltage 5V DC or 7 - 17V DC (Jack 3,5 x 1,3mm connecor, + inside)

UC232

PAPOUCH
 LD232 - RS232 serial line extender

Código: LD232

LD232 (long distance RS232) is a set for extending RS232 line, maximum working distance 1200m, surge supression, galvanic isolation.
    null

LD232

PAPOUCH
 UC485S

Código: UC485S

The UC485 module converts an RS232 line to RS485 or RS422. The module settings can be set using DIP switches. UC485 come s either double or triple isolated. RS485/RS422 line has overvoltage protection. Two versions are availabe: D-SUB 9 connectors or a sl
  • Line settings: RS485, RS422, and RS422 multimaster
  • Transmission speed up to 480 kBd
  • Direction control on the RS485 line can be automatic or by DTR signal (polarity can be set)
  • The RS485/422 line (including the grounding) is completely isolated from RS232 and from the power supply (this isolation is provided as standard for all types)
  • Optionally, grounding of the power supply and grounding of the RS232 line can be isolated from each other (this triple isolated version is available upon request)
  • The RS485/RS422 line has overvoltage protection
  • The ON and data flow statuses are indicated by LED indicators – easy installation and set-up
  • A built-in optional termination, including BIAS resistors (these rersistors define RS485 idle state voltage.
  • Power supply 7 to 40 V (also 36 to 75 V or 5 V is available upon request)
  • D-SUB 9 connectors or a slip-on termination board on the RS485 side
  • Dimensions 105 × 55 × 24 mm, DIN rail mount is optional

UC485

PAPOUCH
 TDS - RS485 7-Segment LED display

Código: TDS

TDS module from the TQS product line is a four digit 7-segment LED display with two universal indicators. TDS communicates over RS485 line via a simple protocol.
  • 7-segment LED display for four digits
  • 2 indicators
  • RS485 communication
  • Spinel or MODBUS RTU communication protocol (user selectable)
  • News: The display can show the values measured by the Wix software
  • Hardware communication indication (LED)
  • Compact
  • Ingress Protection Rating: IP64
  • Low consumption, integrated voltage stabiliser (unstabilised power supply can be used)

TDS

PAPOUCH
 AD4RS - RS232 a RS485 measurement mobule

Código: AD4RS_U

Analog measurement module AD4RS is a four input A/D converter allowing you to measure up to four analogue signals 0-10V or 0(4)-20mA. Measured out values are send to a PC or other system by means of RS232 or RS485 line.
  • Four analogue inputs for voltage or current
  • Each channel can have different range (upon request)
  • Measuring range split into 10 000 pieces
  • Mesuring rate: twice in a second for each channel
  • Communication via RS232 or RS485 line
  • Spinel and Modbus RTU communication protocols (MODBUS documentation on request).
  • Measuring software for watching and logging is supplied as a freeware
  • Wide power supply voltage range: 7 - 30 V DC
  • Measuring is based on a single multiplexed 16 bit sigma-delta A/D converter

AD4RS

PAPOUCH
 TQS3 P - RS485 thermometer to be placed on a pipe

Código: TQS3_P

RS485 digital thermometer for pipe temperature measuremet. Measuring range is  -55 to +125 °C. Thermometer communicates via RS485 line on Spinel or MODBUS RTU protocol. The TQS3 intelligent temperature sensor can be connected to other modules by a single
    null

TQS3 P

PAPOUCH
 A Look Inside

Código: TQS3_O

A digital thermometer for RS485; outdoor design with IP65 protection. It measures temperatures in the range from -55 ° C to +125 ° C and the measured value is sent in degrees Celsius. The thermometer has very low consumption and communicates via Spinel or
    null

TQS3 O

PAPOUCH
 TQS3 I - RS485 Interior thermometer

Código: TQS3_I

Digital thermometer in an indoor make - for in-building temperature measurement. Measuring range is  -55 to +125 °C. Thermometer communicates via RS485 line on Spinel or MODBUS RTU protocol. The TQS3 intelligent temperature sensor can be connected to othe
    null

TQS3 I

PAPOUCH
 THT2 I Interior thermometer and hygrometer

Código: THT2I

Sensor for temperature and humidity with dew point calculation. Comunication via RS485 line. Plastic enclosure with vent holes for interiors. To be mounted on wall or ceiling.
  • Measures relative humidity in range 0 % to 100 %
  • Measures temperature in range -40°C to +123,8 °C (however due to the PVC enclosure the maximum ambient temperature is 70°C)
  • Calculates dew point
  • Calulates temperatures in several units (°C, °F, K)
  • Extreme values memory – THT2I saves maximum and minimum measured-out valu of each quantity.
  • Compatible sensors: temperature and humidity or temperature only (sensor is sold separately)
  • RS485 communication
  • Spinel and ModBus RTU protocols are supported
  • ultra low power consumption design
  • unstabilised power compatible
  • PC software: Wix
  • Connection to PC: Any RS485 converter.
    Tip: There is also sensor like THT2I that connects directly to Ethernet - TH2E.

THT2 I Interior thermometer and hygrometer

PAPOUCH
 TM - RS232 thermometer

Código: TM

TM is a cheap RS232 serial thermometer with measuring range from -55°C to +125°C. It communicates in a simple ASCII format.
  • Measures temperatures from -55°C to +125°C, 0,1°C resolution
  • Output is in ASCII format in °C, no conversion needed.
  • Connects to a serial port (COM)
  • Port powered
  • Wix software included (freeware)
  • Easily integrated in own applications (DLLs, souce codes and communication description provided freely)

TM

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X