Pasarelas de comunicación industrial VSCom
VScom

Pasarelas de comunicación industrial VSCom


Pasarelas de comunicación industrial VSCom


VScom
 ModGate Plus 113

Código: 6710

The Modgate Plus (or Modgate+) are easy to use Gateways from Modbus/TCP on Ethernet or WLAN to Modbus/RTU or Modbus/ASCII on the serial ports. Modgate+ 113 connects one Modbus serial line to a network running TCP/IP. Metal case, wide temperature range and
  • Controls 1 Modbus line located virtually anywhere via Ethernet, WLAN or Internet
  • GigaLAN 10/100/1000 Ethernet
  • Configuration over WEB Browser
  • Supports Modbus Master Multiplexing
  • Supports TCP/IP, DHCP, ICMP, HTTP, DNS
  • Supports ART (Automatic Receive Transmit control)
  • RS232/422/485 interface selected by Software
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 10BaseT/100BaseTx/1000BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional, uses IEEE 802.11b/g/n as Access Point or Client Embedded module or USB expansion available
Protocols TCP/IP, DHCP, ICMP, HTTP, DNS, UDP, UPnP/SSDP, Modbus/TCP, Modbus/RTU, Modbus/ASCII
Serial interface RS232/422/485 selected by software
No. of port 1x DSUB 9 male connector (as PC)
Available Modes RS232 full duplexRS422 full duplexRS485 4 wire, full duplexRS485 2 wire, half duplex
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
Expansion port USB 2.0 High Speed, for WLAN
  Serial Performance
Speed up to 115.2 kbps for Modbus RS232: up to 1000 kbps, RS422/485: up to 3.7Mbps
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Modbus RTU/ASCII Modbus RTU or Modbus ASCII protocol selected for each serial port individually
DirectMappingMode Direct mapping of Modbus addresses to serial ports or TCP connections
PromiscousMode Mapping of serial ports to TCP connections
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN RailWall mount
  Special Features
Installation DIP switches set a defined temporary IP Address to contact via WEB Browser
Operating mode Promiscous ModeMessages received from the network are sent to the serial port, messages from the serial port are sent to the connected network host.Mapped ModeReceived messages are scanned for their target address. This address is found in a table, the message is sent to the defined connection (serial or TCP).
Modbus Master Multiplexing An extension to the standard. Slaves on serial lines may answer requests from multiple masters. The masters connect to ModGate+ by Modbus/TCP.
Configuration Configuration over WEB Browser
Detection Announces presence in the network via Universal Plug and Play (UPNP) protocol
DNS Domain Name Server support
Serial Interface Serial Interface configurable by software This also enables internal Termination for RS485
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Webinterface is password protected. The password can be changed in the Webinterface.

ModGate Plus 113

VScom
 ModGate Plus 213

Código: 6720

The Modgate Plus (or Modgate+) are easy to use Gateways from Modbus/TCP on Ethernet or WLAN to Modbus/RTU or Modbus/ASCII on the serial ports. Modgate+ 213 connects two Modbus serial lines to a network running TCP/IP. Metal case, wide temperature range an
  • Controls 2 Modbus lines located virtually anywhere via Ethernet, WLAN or Internet
  • GigaLAN 10/100/1000 Ethernet
  • Configuration over WEB Browser
  • Supports Modbus Master Multiplexing
  • Supports TCP/IP, DHCP, ICMP, HTTP, DNS
  • Supports ART (Automatic Receive Transmit control)
  • RS232/422/485 interface selected by Software
  • Optional: Wireless network IEEE 802.11b/g/n
  Interface
Ethernet interface Auto-detecting 10BaseT/100BaseTx/1000BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional, uses IEEE 802.11b/g/n as Access Point or Client Embedded module or USB expansion available
Protocols TCP/IP, DHCP, ICMP, HTTP, DNS, UDP, UPnP/SSDP, Modbus/TCP, Modbus/RTU, Modbus/ASCII
Serial interface RS232/422/485 selected by software
No. of port 2x DSUB 9 male connector (as PC)
Available Modes RS232 full duplexRS422 full duplexRS485 4 wire, full duplexRS485 2 wire, half duplex
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
Expansion port USB 2.0 High Speed, for WLAN
  Serial Performance
Speed up to 115.2 kbps for Modbus RS232: up to 1000 kbps, RS422/485: up to 3.7Mbps
Parity None, even, odd, mark, space
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Modbus RTU/ASCII Modbus RTU or Modbus ASCII protocol selected for each serial port individually
DirectMappingMode Direct mapping of Modbus addresses to serial ports or TCP connections
PromiscousMode Mapping of serial ports to TCP connections
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN RailWall mount
  Special Features
Installation DIP switches set a defined temporary IP Address to contact via WEB Browser
Operating mode Promiscous ModeMessages received from the network are sent to defined serial ports, messages from the serial port are sent to defined connected network host.Mapped ModeReceived messages are scanned for their target address. This address is found in a table, the message is sent to the defined connection (serial or TCP).
Modbus Master Multiplexing An extension to the standard. Slaves on serial lines may answer requests from multiple masters. The masters connect to ModGate+ by Modbus/TCP.
Configuration Configuration over WEB Browser
Detection Announces presence in the network via Universal Plug and Play (UPNP) protocol
DNS Domain Name Server support
Serial Interface Serial Interface configurable by software This also enables internal Termination for RS485
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Webinterface is password protected. The password can be changed in the Webinterface.

ModGate Plus 213

VScom
 ModGate Plus 413

Código: 6730

The Modgate Plus (or Modgate+) are easy to use Gateways from Modbus/TCP on Ethernet or WLAN to Modbus/RTU or Modbus/ASCII on the serial ports. Modgate+ 413 connects four Modbus serial lines to a network running TCP/IP. Metal case, wide temperature range a
  • Controls 4 RS232 or RS422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, DHCP, ICMP, HTTP, DNS, UDP, UPnP/SSDP, Modbus/TCP, Modbus/RTU, Modbus/ASCII
Serial interface RS232/422/485 selected by software
No. of port 4x DSUB 9 male connector (as PC)
Available Modes RS232 full duplexRS422 full duplexRS485 4 wire, full duplexRS485 2 wire, half duplex
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
Expansion port USB 2.0 High Speed, for WLAN
  Serial Performance
Speed up to 115.2 kbps for Modbus RS232: up to 1000 kbps, RS422/485: up to 3 Mbps
Parity None, even, odd
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Modbus RTU/ASCII Modbus RTU or Modbus ASCII protocol selected for each serial port individually
DirectMappingMode Direct mapping of Modbus addresses to serial ports or TCP connections
PromiscousMode Mapping of serial ports to TCP connections
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Power over Ethernet Optional, Class 0 Device (802.3af). Typical consumption is 6W.
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Special Features
Installation DIP switches set a defined temporary IP Address to contact via WEB Browser
Operating mode Promiscous ModeMessages received from the network are sent to defined serial ports, messages from the serial port are sent to defined connected network host.Mapped ModeReceived messages are scanned for their target address. This address is found in a table, the message is sent to the defined connection (serial or TCP).
Modbus Master Multiplexing An extension to the standard. Slaves on serial lines may answer requests from multiple masters. The masters connect to ModGate+ by Modbus/TCP.
Configuration Configuration over WEB Browser
Detection Announces presence in the network via Universal Plug and Play (UPNP) protocol
DNS Domain Name Server support
Serial Interface Serial Interface configurable by software This also enables internal Termination for RS485
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Webinterface is password protected. The password can be changed in the Webinterface.

ModGate Plus 413

VScom
 ModGate Plus 813

Código: 6740

The Modgate Plus (or Modgate+) are easy to use Gateways from Modbus/TCP on Ethernet or WLAN to Modbus/RTU or Modbus/ASCII on the serial ports. Modgate+ 813 connects eight Modbus serial lines to a network running TCP/IP. Metal case, wide temperature range
  • Controls 8 RS232/422/485 devices located virtually anywhere via Ethernet, WLAN or Internet
  • Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
  • Port expansion over USB A connector
  • LAN 1000/100/10 Ethernet auto-detect
  • NetCom Manager automatically finds NetCom+ devices in the network
  • Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
  • Automatic mode switching between Driver and Raw Mode
  • Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
  • SSL/AES-256 encryption on Ethernet, WLAN and Internet
  • Optional: Wireless network IEEE 802.11b/g/n
  • Optional: 3G/4G Modem for mobile networks
  Interface
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Protocols TCP/IP, DHCP, ICMP, HTTP, DNS, UDP, UPnP/SSDP, Modbus/TCP, Modbus/RTU, Modbus/ASCII
Serial interface RS232/422/485 selected by software
No. of port 8x DSUB 9 male connector (as PC)
Available Modes RS232 full duplexRS422 full duplexRS485 4 wire, full duplexRS485 2 wire, half duplex
Signals RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, GNDRS422: Tx+/-, Rx+/-, GNDRS485 2 wire: Data+/-, GNDRS485 4 wire: Tx+/-, Rx+/-, GND
RS485 Data control Controlled by ART (Automatic Receive Transmit control)
Expansion port USB 2.0 High Speed, for WLAN
  Serial Performance
Speed up to 115.2 kbps for Modbus RS232: up to 1000 kbps, RS422/485: up to 3 Mbps
Parity None, even, odd
Data bits 7, 8
Stop bits 1, 2
  Operating Modes
Modbus RTU/ASCII Modbus RTU or Modbus ASCII protocol selected for each serial port individually
DirectMappingMode Direct mapping of Modbus addresses to serial ports or TCP connections
PromiscousMode Mapping of serial ports to TCP connections
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.5A @ 12V, 6W
Power over Ethernet Optional, Class 0 Device (802.3af). Typical consumption is 6W.
Dimension 196×147×44 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.9kg
Mounting 19-inch RackWall mount
  Special Features
Installation DIP switches set a defined temporary IP Address to contact via WEB Browser
Operating mode Promiscous ModeMessages received from the network are sent to defined serial ports, messages from the serial port are sent to defined connected network host.Mapped ModeReceived messages are scanned for their target address. This address is found in a table, the message is sent to the defined connection (serial or TCP).
Modbus Master Multiplexing An extension to the standard. Slaves on serial lines may answer requests from multiple masters. The masters connect to ModGate+ by Modbus/TCP.
Configuration Configuration over WEB Browser
Detection Announces presence in the network via Universal Plug and Play (UPNP) protocol
DNS Domain Name Server support
Serial Interface Serial Interface configurable by software This also enables internal Termination for RS485
Firmware Firmware update over WEB Browser
LEDs LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed
  Security
Password access Webinterface is password protected. The password can be changed in the Webinterface.

ModGate Plus 813

VScom
 VScom NetCAN Plus 120 WLAN

Código: 429

The VScom NetCAN+ 120 WLAN is an easy to use gateway from Ethernet to CAN-Bus, based on state of the art RISC components. It provides CAN-BUS communication over Ethernet and WLAN, and allows completely secured communication for both data transfer and conf
  • Connects a PC to CAN bus via Ethernet, WLAN and Internet
  • Supports CAN 2.0A and CAN 2.0B
  • CAN High Speed up to 1 MBit/s
  • Wireless network IEEE 802.11b/g/n
  • LAN 1000/100/10 Ethernet auto-detect
  • Remote Frame support, Listen only mode
  • CAN Bridge operation
  • Supports Windows 2000 to Server 2012, CE
  • Supports Linux (x86, x86-64, ARM)
  • Supports C/C++, C#, VB.NET, Delphi and LabVIEW
  • CANopen supported by CANFestival
  • Driver emulates serial port for easy access
  • Library (DLL) for standard access
  • ASCII conversion protocol via TCP/IP
  • Supports Bosch Busmaster Debugging
  • Metal case
  CAN
Speed CAN High Speed (20kbit/s up to 1Mbit/s) for transmit/receive
Signals CAN_H, CAN_L, CAN_GND
Connector DSub9 male
LED CAN activity (Data), CAN Error
  Network
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface via internal module IEEE 802.11b/g/n operation in Access Point or Client Mode
Connector type SMA-Reverse for WLAN antenna
Protocols TCP/IP, Telnet, DHCP, ICMP, HTTP, SNMP v1/2c/3, DNS
LED Ethernet Link+Speed, WLAN
  Operating Modes
TCP Raw Server Raw Data transfer over TCP/IP. Accepts multiple incoming connections.
CAN Bridge CAN networks are connected via TCP/IP (WLAN or Ethernet). A client connects to a Server, CAN frames received on one network are repeated on the other network.
Driver Mode VScom Driver for Windows 2000, XP up to Windows 8.1Windows Server 2000 up to 2008 R2Driver Mode creates a virtual Com port.
  Special Features
Installation Configuration utility automatically finds NetCAN devices in the network
Operating Mode Automatic Mode switching between Driver and TCP Raw Server Mode.
Configuration Over Driver Panels, NetCOM Manager, WEB Browser, serial Console, Telnet, SNMP
SNMP special VScom MIB included
DNS Domain Name Server support
Firewall special precautions for Firewall environments in Driver Mode
Firmware Firmware update over WEB Browser, Telnet
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN tunnel provides security on WLAN and Ethernet. The tunnel protects the configuration as well as all serial data. It is also usable across the Internet. Strong encryption by SSL-AES up to 256 bit keys
  Driver and Software
Library Unified VSCAN API for simple access on all Vscom CAN products.Supports Windows, CE, Linux (x86, x86-64, ARM) targets.Supports C/C++, C#, VB.NET, Delphi and LabVIEW.
Compatibility Mapper DLLs can simulate software interfaces of CAN adapters from other manufacturers.
CANFestival CANopen examples showing Master/Slave communication
Speed CAN Speed selectable up to 1 Mbit/s
Transfer ASCII coding mode
CAN Modes Standard ModeNormal operation on CAN busListen ModePassive receive of CAN Frames, neither ACK bits nor Error Frames are sentSelf Reception (Echo Mode)For testing: Transmitted Frames are also received by the adapter
Monitoring Tools NetCAN+ and VSCAN API are supported by Bosch BUSMASTERNetCAN+ is supported by CANHacker via Driver Mode
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wallmount (optional)

VScom NetCAN Plus 120 WLAN

VScom
 VScom NetCAN Plus 110

Código: 424

The VScom NetCAN+ 110 is an easy to use gateway from Ethernet to CAN-Bus, based on state of the art RISC components. It provides CAN-BUS communication over Ethernet and WLAN, and allows completely secured communication for both data transfer and configura
  • Connects a PC to CAN bus via Ethernet, WLAN and Internet
  • Supports CAN 2.0A and CAN 2.0B
  • CAN High Speed up to 1 MBit/s
  • USB expansion port for WLAN
  • LAN 1000/100/10 Ethernet auto-detect
  • Remote Frame support, Listen only mode
  • CAN Bridge operation
  • Supports Windows 2000 to Server 2012, CE
  • Supports Linux (x86, x86-64, ARM)
  • Supports C/C++, C#, VB.NET, Delphi and LabVIEW
  • CANopen supported by CANFestival
  • Driver emulates serial port for easy access
  • Library (DLL) for standard access
  • ASCII conversion protocol via TCP/IP
  • Supports Bosch Busmaster Debugging
  • Optional: Wireless network IEEE 802.11b/g/n
  • Metal case
  CAN
Speed CAN High Speed (20kbit/s up to 1Mbit/s) for transmit/receive
Signals CAN_H, CAN_L, CAN_GND
Connector DSub9 male
LED CAN activity (Data), CAN Error
  Network
Ethernet interface Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN) Connector 8P8C (RJ45)
Wireless interface Optional via internal module or external USB stick IEEE 802.11b/g/n operation in Access Point or Client Mode
Connector type SMA-Reverse for WLAN antenna
Protocols TCP/IP, Telnet, DHCP, ICMP, HTTP, SNMP v1/2c/3, DNS
USB port USB 2.0 High Speed, for WLAN
LED Ethernet Link+Speed, WLAN
  Operating Modes
TCP Raw Server Raw Data transfer over TCP/IP. Accepts multiple incoming connections.
CAN Bridge CAN networks are connected via TCP/IP (WLAN or Ethernet). A client connects to a Server, CAN frames received on one network are repeated on the other network.
Driver Mode VScom Driver for Windows 2000, XP up to Windows 8.1Windows Server 2000 up to 2008 R2Driver Mode creates a virtual Com port.
  Special Features
Installation Configuration utility automatically finds NetCAN devices in the network
Operating Mode Automatic Mode switching between Driver and TCP Raw Server Mode.
Configuration Over Driver Panels, NetCOM Manager, WEB Browser, serial Console, Telnet, SNMP
SNMP special VScom MIB included
DNS Domain Name Server support
Firewall special precautions for Firewall environments in Driver Mode
Firmware Firmware update over WEB Browser, Telnet
  Security
Password access Every capabilities of configuration use the same password including SNMP V3
Secure communication OpenVPN tunnel provides security on WLAN and Ethernet. The tunnel protects the configuration as well as all serial data. It is also usable across the Internet. Strong encryption by SSL-AES up to 256 bit keys
  Driver and Software
Library Unified VSCAN API for simple access on all Vscom CAN products.Supports Windows, CE, Linux (x86, x86-64, ARM) targets.Supports C/C++, C#, VB.NET, Delphi and LabVIEW.
Compatibility Mapper DLLs can simulate software interfaces of CAN adapters from other manufacturers.
CANFestival CANopen examples showing Master/Slave communication
Speed CAN Speed selectable up to 1 Mbit/s
Transfer ASCII coding mode
CAN Modes Standard ModeNormal operation on CAN busListen ModePassive receive of CAN Frames, neither ACK bits nor Error Frames are sentSelf Reception (Echo Mode)For testing: Transmitted Frames are also received by the adapter
Monitoring Tools NetCAN+ and VSCAN API are supported by Bosch BUSMASTERNetCAN+ is supported by CANHacker via Driver Mode
  Power and Environment
Connector 3-pin Terminal Block with Protective Earth
Power requirements 9 - 54V DC, 0.3A @ 12V, 4W
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp −20°C - 65°C
Storage Temp −20°C – 85°C
Case SECC sheet metal (1mm)
Weight 0.25kg
Mounting DIN-Rail (optional)Wallmount (optional)

VScom NetCAN Plus 110

VScom
 VScom USB-CAN Plus ISO

Código: 430

  • Connects a PC to isolated CAN bus via USB
  • 2.5kV isolation on CAN
  • USB and CAN port ESD protected
  • Supports CAN 2.0A and CAN 2.0B
  • CAN High Speed up to 1 MBit/s
  • Remote Frame support, Listen only mode
  • Supports Windows 2000 to Server 2012, CE
  • Supports Linux kernel 2.6+
  • Supports C/C++, C#, VB.NET, Delphi and LabVIEW
  • CANopen supported by CANFestival
  • USB 2.0 Full Speed, powered by USB
  • Driver emulates serial port for easy access
  • Library (DLL) for standard access
  • ASCII conversion protocol via serial port
  • Supports Bosch Busmaster Debugging
  • Metal case
  CAN
Speed CAN High Speed (up to 1Mbit/s) for transmit/receive
Signals CAN_H, CAN_L, CAN_GND (isolated from PC port 2.5kV)
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Controller SJA1000 (Philips)
Transceiver SN65HVD233 (Texas Instruments)
LED CAN Activity (Data) CAN Error
Connector DB9 male
  USB
USB-Input USB 2.0 Full Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Power USB bus powered, max. 90 mA
Driver Emulated serial port, 3 Mbit/s
Operating Systems Windows 2000 up to Windows 10Windows Server 2000 up to 2012Linux kernel 2.6+Mac OS X support available
LED CAN Data, CAN Error
  Driver and Software
Library Unified VSCAN API for simple access on all Vscom CAN products.Supports Windows, CE, Linux (x86, x86-64, ARM) targets.Supports C/C++, C#, VB.NET, Delphi and LabVIEW.
Compatibility Mapper DLLs can simulate software interfaces of CAN adapters from other manufacturers.
CANFestival CANopen examples showing Master/slave communication
Speed CAN Speed selectable up to 1 Mbit/s
Transfer ASCII coding mode
CAN Modes Standard ModeNormal operation on CAN busListen ModePassive receive of CAN Frames, neither ACK bits nor Error Frames are sentSelf Reception (Echo Mode)For testing: Transmitted Frames are also received by the adapter
Monitoring Tools VScom USB-CAN PLUS ISO is supported by Bosch BUSMASTERVScom USB-CAN PLUS ISO is supported by CANHacker
  Power and Environment
Power max. 450mW
Power supply max. 90mA via USB port
Dimension 50×72×22 mm³ (W×L×H) Case 72×72×22 mm³ (W×L×H) with mounting wings
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (1mm)
Weight 150 g
Mounting DIN-Rail (optional)Wall mount

VScom USB-CAN Plus ISO

VScom
 VScom USB-CAN Plus

Código: 427

  • Connects a PC to CAN bus via USB
  • Supports CAN 2.0A and CAN 2.0B
  • CAN High Speed up to 1 MBit/s
  • USB and CAN port ESD protected
  • Remote Frame support, Listen only mode
  • Supports Windows 2000 to Server 2012, CE
  • Supports Linux kernel 2.6+
  • Supports C/C++, C#, VB.NET, Delphi and LabVIEW
  • CANopen supported by CANFestival
  • USB 2.0 Full Speed, powered by USB
  • Driver emulates serial port for easy access
  • Library (DLL) for standard access
  • ASCII conversion protocol via serial port
  • Supports Bosch Busmaster Debugging
  • Metal case
  CAN
Speed CAN High Speed (up to 1Mbit/s) for transmit/receive
Signals CAN_H, CAN_L, CAN_GND
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Controller SJA1000 (Philips)
Transceiver SN65HVD233 (Texas Instruments)
LED CAN Activity (Data) CAN Error
Connector DB9 male
  USB
USB-Input USB 2.0 Full Speed, USB 1.1 compliant
Connector USB type B
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Power USB bus powered, max. 80 mA
Driver Emulated serial port, 3 Mbit/s
Operating Systems Windows 2000 up to Windows 10Windows Server 2000 up to 2012Linux kernel 2.6+Mac OS X support available
LED CAN Data, CAN Error
  Driver and Software
Library Unified VSCAN API for simple access on all Vscom CAN products.Supports Windows, CE, Linux (x86, x86-64, ARM) targets.Supports C/C++, C#, VB.NET, Delphi and LabVIEW.
Compatibility Mapper DLLs can simulate software interfaces of CAN adapters from other manufacturers.
CANFestival CANopen examples showing Master/slave communication
Speed CAN Speed selectable up to 1 Mbit/s
Transfer ASCII coding mode
CAN Modes Standard ModeNormal operation on CAN busListen ModePassive receive of CAN Frames, neither ACK bits nor Error Frames are sentSelf Reception (Echo Mode)For testing: Transmitted Frames are also received by the adapter
Monitoring Tools VScom USB-CAN PLUS is supported by Bosch BUSMASTERVScom USB-CAN PLUS is supported by CANHacker
  Power and Environment
Power max. 400mW
Power supply max. 80mA via USB port
Dimension 50×72×22 mm³ (W×L×H) Case 72×72×22 mm³ (W×L×H) with mounting wings
Operating Temp −25°C - 75°C
Storage Temp −30°C – 85°C
Case SECC sheet metal (1mm)
Weight 150 g
Mounting DIN-Rail (optional)Wall mount

VScom USB-CAN Plus

VScom
 Transio A52-230V

Código: 710

  • LED indicator for power and signal state
  • ADDC Automatic Data Control
  • RS422 hardware flow control
  Hardware Specifications
Configuration RS485 ADDC or RTSRS422 hardware control CTS, RTS signals32 units connected together in RS485 multidrop operation
Surge protection 25 KV ESD
Power 9 - 30V, 350 mA
Dimensions 90 x 60 x 21mm WxDxH

Transio A52/230V

VScom
 Transio A53-230V

Código: 712

  • LED indicator for power and signal state
  • ADDC Automatic Data Control
  • 25KV surge protection
  • 2KV optical isolation
  • RS422 hardware flow control
  Hardware Specifications
Configuration RS485 ADDC or RTSRS422 hardware control CTS, RTS signals32 units connected together in RS485 multidrop operation
Surge protection 25 KV ESD
Optical isolation 2 KV
Power 9 - 30V, 350 mA
Dimensions 90 x 60 x 21mm WxDxH

Transio A53/230V

VScom
 VScom SER-485 ISO

Código: 415

  • Preliminary
  • Converts RS232 <=> RS422/485
  • RS422/485 optical isolated
  • RS485 bitrate adaptive ARTc (adaptive baudrate detection in real-time)
  • Full Software Configuration, NO Jumpers. Quick configuration for standard modes
  • Wide range DCin 9-30V @ 200mA
  • LEDs for Power, RS232 & RS485
  • Line Termination: built-in 120Ω resistor software controlled
  • DIN-Rail mountable
  Hardware Specifications
RS232 DCE DSub9 female
RS485 Automatic Receive Transmit control (ARTc) Adaptive baudrate detection in real-time
Line adjust Built-in Termination resistor 120Ω, software controlled
Protection Serial ports compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Operation Modes RS422 RS485 by ART or RTS RS485 Half- and Full-Duplex Ten basic modes selected by DIP switch
Cablelength max. 1200 m
Speed max. 1Mbpsmax. 250kbps with ART
Connectors RS232 1x DSub9 female RS485/RS422 1 x DSub9 male optional terminal block
  Software Configuration
Configuration Menu Various parameters of signal conversion are defined via an easy-to-use menu interface, access is via standard terminal programs (Hyperterminal, miniterm, ...)
Operation Modes RS422 RS485 by RTS RS485 by ART (Automatic Receive Transmit control)
ART options RS485 Transmit/Receive change as quick, average, standard
Wiring RS422 (4-wire) RS485 Full Duplex (4-wire) RS485 Half Duplex (2-wire) no Echo
Termination RS422/485 line termination 120Ω, controlled via operation mode
RS485 BIAS not required
  Power and Environment
Power requirements 9-30V DC, 600mW
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 160 g

VScom SER-485 ISO

VScom
 VScom SER-485

Código: 414

  • Preliminary
  • Converts RS232 <=> RS422/485
  • RS485 bitrate adaptive ARTc (adaptive baudrate detection in real-time)
  • Full Software Configuration, NO Jumpers. Quick configuration for standard modes
  • Wide range DCin 9-30V @ 200mA
  • LEDs for Power, RS232 & RS485
  • Line Termination: built-in 120Ω resistor software controlled
  • DIN-Rail mountable
  Hardware Specifications
RS232 DCE DSub9 female
RS485 Automatic Receive Transmit control (ARTc) Adaptive baudrate detection in real-time
Line adjust Built-in Termination resistor 120Ω, software controlled
Protection Serial ports compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Operation Modes RS422 RS485 by ART or RTS RS485 Half- and Full-Duplex Ten basic modes selected by DIP switch
Cablelength max. 1200 m
Speed max. 1Mbpsmax. 250kbps with ART
Connectors RS232 1x DSub9 female RS485/RS422 1 x DSub9 male optional terminal block
  Software Configuration
Configuration Menu Various parameters of signal conversion are defined via an easy-to-use menu interface, access is via standard terminal programs (Hyperterminal, miniterm, ...)
Operation Modes RS422 RS485 by RTS RS485 by ART (Automatic Receive Transmit control)
ART options RS485 Transmit/Receive change as quick, average, standard
Wiring RS422 (4-wire) RS485 Full Duplex (4-wire) RS485 Half Duplex (2-wire) no Echo
Termination RS422/485 line termination 120Ω, controlled via operation mode
RS485 BIAS not required
  Power and Environment
Power requirements 9-30V DC, 500mW
Protection Compliant with IEC 61000-4-2 ESD 8kV contact / 16kV air discharge
Dimension 115×73×25 mm³ (W×L×H)
Operating Temp 0°C - 60°C
Storage Temp -20°C - 85°C
Case SECC sheet metal (1mm)
Weight 150 g

VScom SER-485

Actualmente estamos trabajando en mostrarte los mejores resultados, si no encuentras el producto que buscas contacta con nosotros a través de info@er-soft.com o al número Tel. +34 916-408-408
Bienvenido a ER-Soft.
ER-Soft con la ley orgánica de protección de datos
Política de cookies.
Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación.
Si continúa navegando, consideramos que acepta su uso.
Más información pulsando aquí
X

¿Necesitas ayuda? Click

ayuda ER-Soft
X
Consulta a ER-Soft. *

 

*

 

* *Campos obligatorios.




X